DSI Gutta Percha Solvent Instructions
- June 13, 2024
- DSI
Table of Contents
DSI Gutta Percha Solvent
INSTRUCTIONS FOR USE
PURPOSE
DSI GuttaSoft is a gutta percha point solvent.
It’s recommended for fitting the primary gutta percha in root canal filling
techniques, using the lateral condensation method.
Using DSI GuttaSoft for the retreatment after root canal gutta percha
condensation is possible as well.
DIRECTION FOR USE
FITTING THE PRIMARY GUTTA POINT
The DSI Gutta Soft solvent softens the surface of the point, so it better
adapts to the contour of the root canal. Perfect marginal fit and precise root
canal anatomy recreation is achieved without the need of a heat treatment.
Choose the needed size of gutta percha, dip it into the Gutta Soft liquid for
2 seconds and insert into the previously prepared, processed and dried root
canal.
Immediately after that, point should be condensed with the solvent lubricated
spreader (while the plasticity remains).
Add more gutta points if necessary.
RETREATMENT
Apply 2-3 drops of the DSI Gutta Soft solvent into the pulp chamber. Wait 1-2
minutes. Using the manual endodontic instrument, remove the softened gutta
Pecha. Repeat the process by adding the solvent and rinsing with sodium
hypochlorite alternately until the canal is completely cleared.
CONTRAINDICATIONS
If the conditions of correct storing, transporting and following the
instructions, no adverse effects should appear.
PACKAGING
Solvent liquid (dropper bottle) 10ml
STORAGE
Store in a dry place (humidity < 50%) in tightly closed containers
(+5°C…+30°C). Always replace the bottle cap immediately after use.
Avoid contact with skin and eyes!
Flammable!
Keep out of reach of children.
Ref: GUTTASOFT
SYMBOLS
Consult instructions for use
Caution, consult accompanying documents
Temperature limit
Keep away from sunlight
Keep dry
Manufacturer
Catalogue number
Batch code
Use by
Date of Manufacture
Failure to comply with the conditions of storage leads to a change of the
working characteristics of the material and decrease the shelf life of the
material.
The manufacturer is not responsible for any loss of quality caused by the
failure to comply with terms of transportation, storage and use established
by the manufacturer for this product. Responsibility for the use of the
material for purposes other than those specified by the manufacturer falls on
the user.
59 haAvoda str.
Ashdod, 7706300 ISRAEL
+972-8931-7235
www.dsisrael.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>