iLIVE IAEBTS410 Truly Wireless Earbuds With Speaker User Guide
- June 6, 2024
- iLive
Table of Contents
iLIVE IAEBTS410 Truly Wireless Earbuds With Speaker
Charging the Earbuds
1. Open the cover and place the earbuds on the charging contacts. Be sure to
match the left and right earbuds with the correct docking station in the case.
2. The earbuds will automatically start charging. When charging, the LED
Indicators on the earbuds will turn red. When charging is complete, the
indicators will turn off.
Linking Earbuds
To link the earbuds:
Power on the earbuds by removing from the case or touch and hold the Function
Touch Pad, and they will automatically link to each other after a few seconds.
A voice prompt will also announce the link.
Note: If pairing is not completed within five minutes, the earbuds will
power OFF.
Pairing Bluetooth
- With the earbuds linked, you can now connect to your Bluetooth device. The LED Indicator on the left earbud will continue flashing blue and red, indicating it is ready to pair to a Bluetooth device.
- On your Bluetooth device, access Bluetooth Settings and search for nearby devices. Select IAEBTS410 when it is discovered. When successfully connected to your Bluetooth device, the LED indicator on both of the earbuds will blink blue once every 6 seconds and a voice prompt will announce the Bluetooth connection.
- Audio played through the connected Bluetooth device will now be heard through both earbuds. Use the controls on the connected device to play audio and adjust volume.
Note: To use a single earbud, take one earbud out of the case, touch and hold the Function Touch Pad to turn on the earbud and start fron step 2.
PLEASE NOTE: Due to the nature of truly wireless earbuds, you may experience slight interruptions with your audio in areas with multiple 2.4Ghz bands or in high wireless traffic areas.
Speakerphone Function
- To accept or end a phone call, tap the Function Touch Pad.
- If you receive a call while already on one call, you can double tap the Function Touch Pad to switch between calls. Tap once to end current call and automatically switch to the other call.
- You can also use the controls on the connected phone to handle phone functions.
Charging Case
- Placing the earbuds in the charging case will automatically begin charging them.
- Removing the earbuds from the case will automatically power them on, link them, and connect to the last used Bluetooth device (earbuds must have been linked and connected to a Bluetooth device already).
Using the Case Speaker
While the earbuds are on and connnected to your device:
- Placing the left or both earbuds in the case and closing the cover will turn on the Case Speaker.
- Audio will now be heard out loud, from the speaker.
- Use Bluetooth device to control play/pause/volume/phone functions.
Customer Support
Customer Service: 1-888-999-4215 |
Email Support: prodinfo@dpiinc.com | Email Parts:
partsinfo@dpiinc.com
For Warranty Information and the most up-to-date version of this User’s Guide,
go to www.iLiveElectronics.com
To download this User’s Guide in English, Spanish, or French, or to get
answers to frequently asked questions, visit the support section at:
www.iLiveElectronics.com
Copyright © 2019 Digital Products International (DPI, Inc.) All other
trademarks appearing herein are the property of their respective owners.
Specifications are subject to change without notice.
FCC Warnings
WARNING: Changes or modifications to this unit not extaply approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings
- WARNING: To prevent fire or shock hazards, do not expose this unit to rain or moisture.
- WARNING : Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable.
- Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state and local guidelines. They should never be disposed of in normal household waste, and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area.
- This product meets and complies with all Federal regulations.
- To avoid hearing damage, make sure that the volume on your music player is turned down before connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume until you reach a comfortable listening level.
WARNING : This product can expose you to chemicals including lead, which
is known to the State of California to cause cancer and birth defects or other
reproductive harm. For more information go to www.P65Warnings.ca.gov.
This product meets and complies with all Federal regulations.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>