smpl 0028 Photo Memory Phone User Guide

smpl 0028 Photo Memory Phone

Storing numbers on photo buttons

STEP 1
Pick up the handset

STEP 2
Press & hold the selected photo button for about 3 seconds until you hear a ‘beep’, then release the button

STEP 3
Enter the number using the keypad as you would normally dial. Ignore any sounds you may hear from the handset during programming.

STEP 4

• Press & release the same photo key again.
• Do not long-pressor wait for a beepthis time.

STEP 5

• Hang up the receiver.
• The number is saved.
•  Stored numbers will be retained when phone is unplugged.

NOTE: Handset volume controls are temporary – press to increase or decrease the volume during a call.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>