BLACK HORSE OFF ROAD BFRN10 Modular Beacon Front Runner Bumper Guard Installation Guide
- June 1, 2024
- BLACK HORSE OFF ROAD
Table of Contents
BLACK HORSE OFF ROAD BFRN10 Modular Beacon Front Runner Bumper Guard
Product Specifications
- Product Name: Texture Black Beacon Front Runner Grille Guard
- Compatibility: 05-21 Nissan Frontier (with sensors relocation)
- Type: Modular
- Item Number: BFRN10
Product Usage Instructions
Before Installation
Read the instructions completely before installation to avoid scratches or damage to your vehicle.
Care and Cleaning
Use a mild soap for cleaning. Periodically check and retighten all hardware for a refreshed look.
Parts List
| NO. | QTY | NAME |
|---|
Installation Steps
-
1. Install the grill guard as shown in the figure. - Install the grill guard with brackets as shown in the figure.
FAQ
- Q: Can this grille guard be installed on other vehicle models?
- A: The grille guard is specifically designed for 05-21 Nissan Frontier with sensors relocation. It is not recommended for other models.
- Q: How often should I check and retighten the hardware?
- A: It is recommended to periodically check and retighten all hardware to ensure proper installation and safety of the grille guard.
TEXTURE BLACK BEACON FRONT RUNNER GRILLE GUARD FOR 05-21 NISSAN FRONTIER (WITH SENSORS RELOCATION) (MODULAR TYPE)
Before Installation
- Please read the instructions completely for easy installation, which will also help you to avoid scratches or other potential damages to your appealing car.
- The figures here are for reference only and may have differences with the actual product you received, however, they share the same assembly way.
Care and Cleaning
- Mild soap may be used also to clean the Product.
- Please periodically check and retighten all the hardware and clean the investment for a refresh look.
Parts list
Installation Steps
Step1: Install the grill buard as below figure shown
Step 2: Install the grill guard with brackets as below figure shown
.
Find out the mounting holes for brackets installation from the bottom of the
car as below figure shown
Support brackets mounting holes
First install the short sleeve, and then fasten the support brackets as below
figures shown
Finished installation as below figure shown:
NOTE
Any damages and losses caused by improper installation and application go beyond our quality warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>