Our Lighting 3533D10 Light Rustic Industrial Oil Rubbed Instruction Manual

Our Lighting 3533D10 Light Rustic Industrial Oil Rubbed

Product Information

• SKU: #3533D10
• Bulb not included

Product Usage Instructions

Assembly Instructions:

WARNING:
Do not exceed recommended wattages.

Mounting:

1. Straighten Sockets (P), then secure Metal Sleeve (Q) into elbow pipe.
2. Attach Elbow Pipe (N) on Fixture (J), then secure Hexnut (K) and spring Washer (L) into the lip of the elbow pipe, and secure Hexnut (K) with Allen Wrench (M).

Wiring:

1. Open the Janitors from the Wiring Terminal (R).
2. Insert the white/black wire into the hole of the Wiring Terminal (R), then close the Janitors.
3. Place Metal Cap (T) on Threaded Pipe (S) and secure with Finial (U).

Canopy Installation:
Place Canopy (E) on the lip of Mounting Plate (D) and secure with Canopy nuts (F).

Tubing Installation:

1. Secure Long Tube (H) and Short Tube (G) into Lip (I) in order.
2. Secure Canopy (E) into Short Tube (G).

FAQ

• Q: What should I do if I exceed the recommended wattage?
  A: It is important not to exceed the recommended wattage to prevent damage to the product. Please ensure you use bulbs within the specified wattage range.

• Q: Can I use a different SKU of bulb with this product?
  A: The recommended SKU for bulbs is #3533D10. It is advised to use this specific SKU for optimal compatibility and performance.

Dear customer,
Thank you for choosing Our Lighting. If you have any concerns or questions about our products, please do not hesitate to contact us directly. We’ll provide the best service for you. Hope you enjoy the shopping experience!

Any questions please free to contact us:

• Email: nikki@doraimilight.com.

SAFETY WARNING

• It is strongly suggested that all hardwired fixtures be installed by a professional electrician.
• To reduce the risk of fire, electrical shocks or personal injuries, always turn off the light fixture and let it cool before replacing the light bulbs.
• Do not touch the bulb when fixture is turned on; do not look directly at a lit bulb.
• Keep flammable materials away from a lit bulb.
• Shut off all the main electrical supply from the fuse box/circuit breaker
• Use E12 TYPE B CFL 6W, LED 4W bulb types and wattages. Do not exceed the recommended wattage

SKU:# 3533D10
(Not including the bulb)

Parts Included

Hardware enclosed

Installation

Step 1:

1. Remove all parts and hardware from the box along with all plastic protective packaging.
2. Unscrew the pre-assembled Canopy Nuts (F) from Mounting Plate (D).

Step 2:

1. Straighten Sockets(P), then secure Metal Sleeve(Q) into elbow pipe.
2. Attach Elbow Pipe(N) on Fixture(J), then secure Hexnut(K) and spring Washer(L) into the lip of the elbow pipe, and secure Hexnut(K) with Allen Wrench(M).

Step 3:

1. Open the Janitors from Wiring Terminal(R).
2. Insert the white/black wire into the hole of Wiring Terminal(R), then close the Janitors.
3. Place Metal Cap(T) on Threaded Pipe(S) and secure with Finial(U).

Step 4:

1. Secure Long Tube(H) and short Tube(G) into Lip(I) in order.
2. Secure Canopy(E) into Short Tube(G).

Step 5:

1. Gently pull the wire in the ceiling junction box and let the wire hang.
2. Attach Mounting Plate (D) to the junction box.
3. Secure the Mounting Plate (D) by tightening 2 Mouting Screw (C) with a screwdriver.

Step 6:
Connect the white wire of the fixture to the white wire of the supply circuit. Connect the black wire of the fixture to the black wire of the supply circuit. Connect the Ground fixture wire with the Ground J-Box wire, with the Wire Connector (A).

Step 7:

1. Place Canopy(E) on the lip of Mounting Plate(D) and secure with Canopy nuts(F).

Step 8:
Install bulbs(not included) into the Socket.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>