OUR LIGHTING 3394D3 Crystal Shade Hanging Kitchen Island Modern Concise Ceiling Pendant Lighting Instruction Manual
- June 17, 2024
- OUR LIGHTING
Table of Contents
3394D3 Crystal Shade Hanging Kitchen Island Modern
Concise Ceiling Pendant Lighting
Instruction Manual
Assembly Instructions
WARNING:
- It is strongly suggested that all hardwired fixtures be installed by a professional electrician..
- To reduce the risk of fire, electrical shocks or personal injuries, always turn off the light fixture and let it cool prior to replacing the light bulbs.
- Do not touch the bulb when fixture is turned on; do not look directly at a lit bulb.
- Keep flammable materials away from a lit bulb.
- Shut off all the main electrical supply from the fuse box/circuit breaker
- Use E26 TYPE A CFL 10W, LED 6W bu lb types and wattages. Do not exceed recommended wattages
SKU:# 3394/3398/3659D3
(Not included the bulb)
Parts included
| Part | Description | QTY |
|---|---|---|
| B | Green Screw | 1 |
| D | Mounting Plate | 1 |
| E | Canopy | 1 |
| F | Canopy Nuts | 1 |
| H | Hexnut | 3 |
| 1 | Threaded Collar | 3 |
| J | Power Cord | 3 |
| K | Socket | 3 |
| L | Plastic clip | 3 |
| M | Shade | 3 |
| N | Socket Ring | 3 |
| O | Wiring Terminal | 3 |
Hardware enclosed:
| Part | Description | QTY |
|---|---|---|
| A | Wire Connector | 3 |
| C | Mounting Screw | 2 |
| G | Allen Wrench | 1 |
Dear customer,
Thank you for choosing Our Lighting. If you have any concerns or questions
about our products, please do not hesitate to contact us directly. We’ll
provide the best service for you. Hope you enjoy the shopping experience!
Any questions please free to contact us:
Email: nikki@doraimilight.com
Step 1:
- Unsecure Hexnut(H) from Threaded Collar(I) with Allen Wrench(G).
- Across Power Cord(J) into Threaded Collar(I) and adjust length as needed, then secure Hexnut(H) with Allen Wrench(G), attach Plastic Cilp(L) into Power Cord(J).
Step 2:
- Open the Janitors from Wiring Terminal(O).
- Insert the white/black wire into the hole of Wiring Terminal(O), then close the Janitors.
Step 3:
- Gently pull the wire in the ceiling junction box and let the wire hang.
- Attach Mounting Plate (D) to the junction box.
- Secure the Mounting Plate (D) by tightening 2 Mounting Screw (C) with a screwdriver.
Step 4:
Connect the white wire of the fixture to the white wire of the supply circuit.
Connect the black wire of the fixture to the black wire of the supply circuit.
Connect the Ground fixture wire with the Ground J-Box wire with the Wire
Connector(A).
Step 5:
Place Canopy(E) on Mounting Plate(D) and secure with Grub Screw(F).
Step 6:
Install bulb(not included) into Socket(K).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>