actto ABTM Series Wireless BT Dual Mouse User Guide
- June 3, 2024
- actto
Table of Contents
Series Wireless BT Dual Mouse
User Guide
ABTM Series Wireless BT Dual Mouse
Product model: ABTM-01/ABTM-03/ABTM-05
Product Name: Act to Wireless B/T Dual Mouse
Component description
- Bluetooth channel switching (short press to switch the channel, long press for 3 seconds to connect the code. Channel 1 Bluetooth: blue light channel 2 Bluetooth: green light; channel 3 wireless: white light)
- Power (on-off) key
- Battery back cover
- Receiver storage tank
- Receiver
- resolution adjustment key
Battery insertion method:
- Open the battery cover at the bottom of the mouse
- After confirming the (+) -) two levels of a section of AA, insert it accurately
- After inserting the battery, close the rear cover of the battery (it is all covered after clicking)
Power (on-off) key:
- Turn on the power: push the power button at the bottom of the mouse to on to turn on the power.
- Turn off the power: push the power button at the bottom of the mouse to off to turn off the power.
Bluetooth connection method:
- Long press the pairing button on the front of the mouse for 3 seconds, and the light flashes to enter the pairing mode
- Activate the Bluetooth function of the device to be connected
- Select the ACTTO BT1 mouse and ACTTO BT2 mouse to connect the device and use the mouse. It can be automatically identified without installing additional drivers and programs and can be connected up to 10 meters
Bluetooth connection (Windows):
- After connecting the Bluetooth receiver to the computer, the Bluetooth icon will appear in the taskbar of the window
- Right-click the Bluetooth icon and select Add “Bluetooth” device
- Select the device type to be searched
- Long press the pairing button on the front of the mouse for 3 seconds to enter the pairing mode.
- Select the ACTTO BT1 mouse and connect the device
- After the equipment is ready for use, click finish and use the mouse.
※ Before using the product, please check whether a Bluetooth receiver is built-in or installed on the computer. If the Bluetooth receiver is not installed, it cannot be used. Please purchase and install the
Bluetooth receiver before using it.
Bluetooth connection (MAC PC):
- Click computer system environment settings > Bluetooth
- Click to open Bluetooth.
- Long press the pairing button on the front of the mouse for 3 seconds to enter the pairing mode.
- Select the ACTTO BT1 mouse and connect the device.
Bluetooth connection (iPhone / iPad / ios13 or above):
- Settings > auxiliary functions > touch > Assistant touch > Open
- Assistant touch > Equipment > select Bluetooth equipment.
- Long press the pairing button on the front of the mouse for 3 seconds to enter the pairing mode.
- Select the ACTTO BT1 mouse and connect the device
※Assistant touch must be turned on to display the mouse pointer
2.4G wireless connection method:
- Push the power button at the bottom to on to turn on the power
- Insert the receiver into the USB interface of the computer or notebook
- Use immediately after setting
※Bluetooth channel lights are displayed in Blue & green; 2.4G light is white.
Resolution adjustment method:
Each time you press the resolution adjustment key, you will enter
800DPI>1200DPI>1600DPI
- 800DPI: the pointer moves at an appropriate speed.
- 1200DPI: pointer moves at a faster speed
- 1600DPI: pointer moves at a very fast speed.
FCC Requirement
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies ith Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>