KYOCERA ECOSYS MA6000ifx Series User Guide
- June 9, 2024
- Kyocera
Table of Contents
KYOCERA ECOSYS MA6000ifx Series
Product Information: ECOSYS MA6000ifx/ECOSYS MA5500ifx Setup
The ECOSYS MA6000ifx/ECOSYS MA5500ifx Setup Guide ECOSYS MA4500ifx/ECOSYS
MA4500ix is a high-performance multifunctional printer designed for office
use. The printer requires a dedicated 120VAC 60Hz 15A outlet or a dedicated
200-240VAC 50/60Hz 15A outlet for installation. The printer has a recommended
installation space of 400 mm x 400 mm x 300 mm and can be affected by adverse
environmental conditions.
Installation Environment
Kyocera Recommends selecting the Location for the machine as follows:
- Room Temperature range: 50 to 90.5°F
- Humidity Level: 10 to 80%
- Power: 120 V Specification Model:
- A dedicated 120VAC 60Hz 15A outlet
- 230 V Specification Model:
- A dedicated 200-240VAC 50/60Hz 15A outlet
- A dedicated 120VAC 60Hz 15A outlet or a dedicated 200-240VAC 50/60Hz 15A outlet
- Avoid locations near a window or with exposure to direct sunlight.
- Avoid locations with vibrations.
- Avoid locations with rapid temperature fluctuations.
- Avoid locations with direct exposure to hot or cold air.
- Avoid poorly ventilated locations.
Recommended Installation Space
- Width: 400 mm (15.75)
- Depth: 400 mm (15.75)
- Height: 300 mm (11.81)
- Top Margin: 100 mm (3.94)
- Bottom Margin: 200 mm (7.87)
- Left Margin: 500 mm (19.69)
- Right Margin: 500 mm (19.69)
Product Usage Instructions
Step 1: Setting up the Machine
- Open the box and remove the machine carefully from the box by grasping both sides.
- Lift the main unit from the handles by cardboard handles.
- Open the top cover and after removing the packing material,= shake and install the toner container. Close the top cover.
Step 2: Install Waste toner box
- Remove the waste toner box from its packaging.
- Install the waste toner box in the printer.
- Open the top cover. After Removing the packing material, shake and install the toner container. Close the top cover.
Step 3: Loading Paper
- Pull Cassette 1 completely out of the machine.
- Adjust the paper length and width guide to the paper size required.
- Fan the paper, then tap it on a level surface.
- Load paper, set print side face-down, and ensure there are no bent or folder edges in the paper as it may cause paper jams.
- Gently push Cassette 1 back in, ensuring that the paper is loaded without adjusting the paper length guide and the paper width guides to prevent skewed paper feeding and a paper jam.
- Set print side face-down.
- No bent or folder edges in the paper. Such paper may cause paper jams.
- Set the quantity of the paper less than the maximum paper indication on the side or the cassette.
- If the paper is loaded without adj usting the paper length guide and the pa per width guides, skewed paper feeding, and a paper jam will occur.
Step 4: Powering on the Machine
- Connect the power cord to the rear of the machine and the other end to the power outlet.
- Turn the power switch ON at the front of the machine.
Step 5: Default Settings of the Machine
-
Select default language > [Next >].
-
The settings can be configured in a wizard-style screen.
Follow the instructions on the screen.
NOTE
To proceed to the next screen, select [Next >].
To return to the previous screen, select [<< Previous].
To advances to the next item without setting the current item, select [Skip].
-
When the following screen appears, select [Finish].
Step 6: Printing a Status Page
- [System Menu/Counter] Key > [Notification/Report] > Print Report/List[Print Report/List]
- [Status Page] > [Print]
Step 7: Installing Software
Access the following URL and select your model and OS. Download Center:
https://kyocera.info/. For Windows, download and run the Web Installer, and
follow the on-screen instructions to install the driver and software.
For Mac
Download and run the driver and follow the on-screen instructions to install.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>