Our Lighting 3425D1 6.5 Inch Dark Brown Rattan Pendant Ceiling Light Instruction Manual
- June 17, 2024
- OUR LIGHTING
Table of Contents
SKU:# 3425D1
(Not included the bulb)
Assembly Instructions
WARNING:
- It is strongly suggested that all hardwired fixtures be installed by a professional electrician..
- To reduce the risk of fire, electrical shocks or personal injuries, always turn off the light fixture and let it cool prior to replacing the light bulbs.
- Do not touch the bulb when fixture is turned on; do not look directly at a lit bulb.
- Keep flammable materials away from a lit bulb.
- Shut off all the main electrical supply from the fuse box/circuit breaker
- Use E26 TYPE T CFL 10W, LED 6W bu lb types and wattages. Do not exceed recommended wattages
Parts included
| Part | Description | QTY |
|---|---|---|
| B | Green Screw | 1 |
| D | Mounting Plate | 1 |
| E | Canopy | 1 |
| F | Canopy Nuts | 2 |
| H | Hexnut | 1 |
| I | Threaded Collar | 1 |
| J | Power Cord | 1 |
| K | Plastic Clip | 1 |
| L | Socket | 1 |
Hardware enclosed
| Part | Description | QTY |
|---|---|---|
| A | Wire Connector | 3 |
| C | Mounting Screw | 2 |
| G | Allen Wrench | 1 |
Dear customer,
Thank you for choosing Our Lighting. If you have any concerns or questions
about our products, please do not hesitate to contact us directly. We’ll
provide the best service for you. Hope you enjoy the shopping experience!
Any questions please free to contact us:
Email: nikki@doraimilight.com
Step 1:
Unscrew the Canopy Nuts(F) from the Mounting Plate(D).
Step 2:
Cross Power Cord(J) into the Threaded Collar(I) and Canopy(E), then adjust the
right length of power cord.
Use Allen Wrench(G) to secure Hexnut(H),cross Power Cord(J) into Plastic
clip(K) for pulling resistant
Step3:
- Gently pull existing wire down from the ceiling junction box and allow wires to hang.
- Attach Mounting Plate (D) to the ceiling outlet box.
- Secure the Mounting Plate (D) by tightening 2 Mounting Screw (C) with a screwdriver.
Step4:
Connect the white wire from the fixture to the white wire of the supply
circuit. Connect the black wire from the fixture to the black wire of the
supply circuit. 
Step5:
Place the canopy (A) against the mounting surface, secure the Canopy Nut(F).
Step6:
- Install bulbs(not included) into the Socket(L).
