Our Lighting 3810D1 2 Pack 1 Light Hanging Indoor Gold Kitchen Island Pendant Ceiling Light Fixtures Instruction Manual

Our Lighting 3810D1 2 Pack 1 Light Hanging Indoor Gold Kitchen Island

Pendant Ceiling Light Fixtures

Product Information

Specifications

• SKU: #3738D1 (Bulb not included)
• Material: Metal
• Color: Silver
• Dimensions: 24 inches diameter
• Weight: 5 lbs

Product Usage Instructions

Step 1: Unpacking

1. Remove all parts and hardware from the box.
2. Unscrew the pre-assembled Canopy Nuts (F) from Mounting Plate (D).

Step 2: Assembling Support Rod and Tube
Put the Support Rod (I) and the Tube (H) in order, then thread the Threaded Pipe (G) through. Tighten on the Lip (J) according to your needs.

Step 3: Attaching Mounting Plate

1. Gently pull the wires in the ceiling junction box and let them hang.
2. Attach Mounting Plate (D) to the junction box.
3. Secure the Mounting Plate (D) by tightening 2 Junction Box Screws (C) with a screwdriver.

Step 4: Connecting Wires
Connect the white wire of the fixture to the white wire of the supply circuit. Connect the black wire of the fixture to the black wire of the supply circuit. Connect the Ground fixture wire with the Ground J-Box wire using Wire Connector(A).

Step 5: Mounting Canopy
Place Canopy (E) on the lip of Mounting Plate (D) and secure it with Canopy Nuts (F).

Step 6: Final Assembly

1. Attach Metal Circle (L) on Shade (M).
2. Place Shade (M) on Socket (K) and secure it with Socket Ring (N).
3. Install bulbs (not included) into the Socket (K).

FAQ

• Q: What should I do if I exceed the recommended wattage?
  A: It is important not to exceed the recommended wattage to avoid any damage to the product or potential hazards.

• Q: Can I use different types of bulbs with this product?
  A: Yes, you can use compatible bulbs with the appropriate wattage and size for this fixture.

• Q: How do I clean and maintain this light fixture?
  A: To clean, switch off the power and use a soft, dry cloth to gently wipe down the fixture. Avoid using harsh chemicals or abrasive materials.

Dear customer,
Thank you for choosing Our Lighting. If you have any concerns or questions about our products, please do not hesitate to contact us directly. We’ll provide the best service for you. Hope you enjoy the shopping experience!
Any questions please free to contact us:
Email: nikki@doraimilight.com

Assembly Instructions

WARNING:

• It is strongly suggested that all hardwired fixtures be installed by a professional electrician..
• To reduce the risk of fire, electrical shocks or personal injuries, always turn off the light fixture and let it cool prior to replacing the light bulbs.
• Do not touch the bulb when fixture is turned on; do not look directly at a lit bulb.
• Keep flammable materials away from a lit bulb.
• Shut off all the main electrical supply from the fuse box/circuit breaker
• Use E26 TYPE A CFL 10W, LED 6W bu lb types and wattages. Do not exceed recommended wattages SKU:# 3738D1 (Not included the bulb)

Parts included:

Hardware enclosed:

1. Step 1:

2. Remove all parts and hardware from box along with all plastic protective packaging.

3. Unscrew the pre-assembled Canopy Nuts (F) from Mounting Plate(D).

4. Step 2:
   Put the Support Rod(I) and the Tube (H) in order. Threaded Pipe(G) . Tighten on the Lip (J) warm tip (according to their own needs can be selected with a few tubes) .

5. Step 3:

6. Gently pull the wire in the ceiling junction box and let the wire hang

7. Attach Mounting Plate (D) to the junction box.

8. Secure the Mounting Plate (D) by tightening 2 Junction Box Screws (C) with a screwdriver.

9. Step 4:
   Connect the white wire of the fixture to the white wire of the supply circuit. Connect the black wire of the fixture to the black wire of the supply circuit. Connect the Ground fixture wire with the Ground J-Box wire, with the Wire Connector(A) .

10. Step 5:
    Place Canopy(E) on the lip of Mounting Plate(D) and secure with Canopy Nuts(F). Step 6:

11. Attach Metal Cirecle(L) on Shade(M).

12. Place Shade(M) on Socket(K) and secure with Socket Ring(N).

13. Install bulbs(not included) into the Socket(K).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>