Our Lighting 3074D3 LED 2 Pack 3 Light Industrial Metal Pendant Light Instruction Manual
- May 15, 2024
- OUR LIGHTING
Table of Contents
Dear customer,
Thank you for choosing Our Lighting. If you have any concerns or questions
about our products, please do not hesitate to contact us directly. We’ll
provide the best service for you. Hope you enjoy the shopping experience!
Assembly Instructions
WARNING:
- It is strongly suggested that all hardwired fixtures be installed by a professional electrician..
- To reduce the risk of fire, electrical shocks or personal injuries, always turn off the light fixture and let it cool prior to replacing the light bulbs.
- Do not touch the bulb when fixture is turned on; do not look directly at a lit bulb.
- Keep flammable materials away from a lit bulb.
- Shut off all the main electrical supply from the fuse box/circuit breaker
- Use E12 TYPE B CFL 6W,LED 4W bul b types and wattages. Do not exceed recommended wattages
SKU:# 3074D3
(Not included the bulb)
Parts Included
| Part | Description | QTY |
|---|---|---|
| B | Green Screw | 1 |
| D | Mounting Plate | 1 |
| E | Canopy | 1 |
| F | Canopy Nuts | 2 |
| H | Hex Nut | 1 |
| I | Threaded Collar | 1 |
| J | Power Cord | 1 |
| K | Socket | 3 |
| L | Metal Ring | 3 |
| M | Metal Ring | 1 |
| N | Finial | 6 |
| 0 | Joint | 1 |
| P | Metal Tube | 1 |
| Q | Lip | 1 |
Hardware Enclosed
| Part | Description | QTY |
|---|---|---|
| A | Wire Connector | 3 |
| C | Mounting Screw | 2 |
| G | Allen Wrench | 1 |
Step 1:
Take the fixture out and unsecure the Canopy Nuts(F).
Step 2:
Loosen Hex Nut(H) with Allen Wrench(G) and adjust the length of cord(J) as
needed, then secure Hex Nut(H) into Threaded Collar(I) with Allen wrench(G).
Step 3:
- Gently pull existing wire down from the ceiling junction box and allow wires to hang.
- Attach Mounting Plate (D) to the ceiling outlet box.
- Secure the Mounting Plate (D) by tightening 2 Junction Box Screw (C) with a screwdriver.
Step 4:
Adjust Socket(K) to porper position, then attach Metal Tube(P) onto Lip(Q) of
the fixture, and secure with Joint(O).
Step 5:
Adjust Metal Ring(L A, L B, L C) to the proper position, then attach Metal
Ring(M) on the middle of the metal frame and secure with Finial(N).
Step 6:
Attach Canopy(E) and secure Canopy Nuts into the lip of Mounting Plate(D).
Step 7:
Place the canopy (A) against the mounting surface, secure the Canopy
Nut(F).
Steps 8:
Install the bulb (not included).
