Our Lighting 3810D1 2 Pack 1 Light Crystal Pendant Light Instruction Manual
- June 17, 2024
- OUR LIGHTING
Table of Contents
3810D1 2 Pack 1 Light Crystal Pendant Light
Dear customer,
Thank you for choosing Our Lighting. If you have any concerns or questions
about our products, please do not hesitate to contact us directly. We’ll
provide the best service for you. Hope you enjoy the shopping experience!
Email: nikki@doraimilight.com
Any questions please free to contact us:
Assembly Instructions
WARNING:
- It is strongly suggested that all hardwired fixtures be installed by a professional electrician..
- To reduce the risk of fire, electrical shocks or personal injuries, always turn off the light fixture and let it cool prior to replacing the light bulbs.
- Do not touch the bulb when fixture is turned on; do not look directly at a lit bulb.
- Keep flammable materials away from a lit bulb.
- Shut off all the main electrical supply from the fuse box/circuit breaker
- Use E26 TYPE A CFL 10W, LED 6W bu lb types and wattages. Do not exceed recommended wattages
SKU:# 3773D1/3721D1
(Not included the bulb)
Pads included:
| Part | Description | QTY |
|---|---|---|
| B | Green Screw | 1 |
| D | Mounting Plate | 1 |
| E | Canopy | 1 |
| F | Canopy Nuts | 2 |
| H | Hexnut | 1 |
| I | Threaded Collar | 1 |
| J | Power Cord | 1 |
| K | Plastic Clip | 1 |
| L | Socket | 1 |
| M | Shade | 1 |
| N | Socket Ring | 1 |
Hardware enclosed:
| Part | Description | QTY |
|---|---|---|
| A | Wire Connector | 3 |
| C | Mounting Screw | 2 |
| G | Allen Wrench | 1 |
Step 1:
Unscrew the Canopy Nuts(F) from the Mounting Plate(D). 
Step 2:
Cross Power Cord(J) into the Threaded Collar(I) andCanopy(E), then adjust
the right length of power cord.Use Allen Wrench(G) to secure Hexnut(H),cross
PowerCord(J) into Plastic clip(K) for pulling resistant
Step3 :
- Gently pull existing wire down from the ceilingjunction box and allow wires to hang.
- Attach Mounting Plate (D) to the ceiling outlet box.
- Secure the Mounting Plate (D) by tightening 2 Mounting Screw (C) with a screwdriver.
Step4:
Connect the white wire from the fixture tothe white wire of the supply
circuit. Connect the blackwire from the fixture to the black wire of the
supply circuit.
Step5:
1.Place Canopy(E) on the lip of Mounting Plate(D) and secure with Canopy
Nuts(F). Step6:
- Place Shade(M) on Socket (L) and secure with socket Ring (N) .
- Install bulbs(not included) into the Socket(L).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>