Our Lighting 3662D1 2 Pack 1 Light Black Metal Drum Pendant Lights Instruction Manual

Our Lighting 3662D1 2 Pack 1 Light Black Metal Drum Pendant Lights

Product Information

Specifications

• SKU: # 3518/3662D1 (Bulb not included)
• Components: Support Rod, Lip, Metal Circle, Hexnut, Threaded Collar, Allen Wrench, Shade, Socket, Socket Ring

Product Usage Instructions

Assembly Instructions

WARNING: Ensure to follow the recommended weights and guidelines. Do not exceed the specified weight limits.

1. Secure Support Rod (L) onto Lip (M).
2. Secure Hexnut (H) into Threaded Collar (I) using the Allen Wrench (G).
3. Attach Metal Circle (O) onto Shade (P).
4. Place Shade (P) on Socket (N) and secure it with Socket Ring (Q).

FAQ

• Q: What should I do if I exceed the recommended weight limits?
• A: It is crucial to adhere to the weight limits specified for the product. Exceeding these limits can compromise the safety and functionality of the light fixture. If you need a product that can support heavier loads, consider exploring alternative options that meet your requirements.
• Q: Can I use a different bulb than the one recommended?
• A: While the bulb may not be included with the product, it is essential to use a bulb that is compatible with the fixture’s specifications. Using an incorrect bulb type or wattage can lead to performance issues or even pose a safety hazard. Refer to the product manual or contact our customer support for guidance on suitable bulb options.
• Q: How do I clean and maintain the light fixture?
• A: To clean the fixture, ensure it is turned off and cool to the touch. Use a soft, dry cloth to gently wipe away dust and dirt from the surface. Avoid using harsh chemicals or abrasive materials that may damage the finish. Regular maintenance will help preserve the appearance and functionality of the light fixture.

Dear customer,
Thank you for choosing Our Lighng. If you have any concerns or questions about our products, please do not hesitate to contact us directly. We’ll provide the best service for you. Hope you enjoy the shopping experience!

Assembly Instructions

WARNING

• It is strongly suggested that all hardwired fixtures be installed by a professional electrician.
• To reduce the risk of fire, electrical shocks or personal injuries, always turn off the light fixture and let it cool before replacing the light bulbs.
• Do not touch the bulb when the fixture is turned on; do not look directly at a lit bulb.
• Keep flammable materials away from a lit bulb.
• Shut off all the main electrical supply from the fuse box/circuit breaker
• Use E26 TYPE A CFL 10W, LED 6W bulb types and wattages. Do not exceed the recommended wattage.

SKU:# 3518/3662D1

• (Not including the bulb)

Parts included

Hardware enclosed

Installation Instructions

Step 1
Unscrew the Canopy Nuts(F) from the Mounting Plate(D).

Step 2
Secure Support Rod(L) onto Lip(M), then secure Hexnut(H) into Threaded Collar(I) with Allen Wrench(G).

Step 3
Cross Power Cord(J) into the Threaded CollarI) and Canopy(E), then adjust the right length of the power cord.
Use Allen Wrench(G) to secure Hexnut(H), and cross Power Cord(J) into Plastic clip(K) for pulling resistance.

Step4

1. Gently pull the existing wire down from the ceiling junction box and allow the wires to hang.
2. Attach Mounting Plate (D) to the ceiling outlet box.
3. Secure the Mounting Plate (D) by tightening 2 Mounting screws (C) with a screwdriver.

Step5
Connect the white wire from the fixture to the white wire of the supply circuit. Connect the black wire from the fixture to the black wire of the supply circuit.

Step6

1. Place Canopy(E) on the lip of Mounting Plate(D) and secure with Canopy Nuts(F).

Step7:

1. Attach Metal Cirecle(O) on Shade(P).
2. Place Shade(P) on Socket(N) and secure with Socket Ring(Q).
3. Install bulbs(not included) into the Socket(N).

CONTACT

• Any questions please free to contact us:
• Email: nikki@doraimilight.com.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>