Our Lighting 3632D4 4 Light 15.5” Rustic Metal Black Lantern Cage Farmhouse Instruction Manual
- June 17, 2024
- OUR LIGHTING
Table of Contents
3632D4 4 Light 15.5” Rustic Metal Black Lantern Cage Farmhouse
Assembly Instructions
Dear customer,
Thank you for choosing Our Lighting. If you have any concerns or questions
about our products, please do not hesitate to contact us directly. We’ll
provide the best service for you. Hope you enjoy the shopping experience!
Any questions please free to contact us:
Email: nikki@doraimilight.com
WARNING:
- It is strongly suggested that all hardwired fixtures be installed by a professional electrician..
- To reduce the risk of fire, electrical shocks or personal injuries, always turn off the light fixture and let it cool prior to replacing the light bulbs.
- Do not touch the bulb when fixture is turned on; do not look directly at a lit bulb.
- Keep flammable materials away from a lit bulb.
- Shut off all the main electrical supply from the fuse box/circuit breaker
- Use E12 TYPE B CFL 6W, LED 4W bul b types and wattages. Do not exceed recommended wattages
SKU:# 3632D4
(Not included the bulb)
 Parts included:
| Part | Description | QTY |
|---|---|---|
| B | Green Screw | 1 |
| D | Mounting Plate | 1 |
| E | Canopy | 1 |
| F | Canopy Nuts | 2 |
| G | Chain | 1 |
| H | Quick Link | 2 |
| I | Metal Tube | 1 |
| J | Lip | 1 |
| K | Fixture | 1 |
| L | Screw | 8 |
| M | Metal Frame Assembly | 4 |
| N | Joint | 1 |
| 0 | Support Rod | 1 |
| P | Lip | 1 |
| Q | Socket | 4 |
| R | Metal Circle | 1 |
Hardware enclosed:
| Part | Description | QT Y |
|---|---|---|
| A | Wire Connector | 3 |
| C | Mounting Screw | 2 |
Step 1:
Unscrew the Canopy Nuts(F) from the Mounting Plate(D).
Step 2:
- Straighten Sockets(Q) as shown in picture.
- Place Metal Frame Assembly(M) on Fixture(K), Metal Circle(R) and secure with Screw(L).
- Secure Support Rod(O) into Joint(N) and Lip(P).
Step 3:
- Secure Metal Tube(I) into Lip(J).
- Across power cord into Chain(G), and hang the Quick Link(H) into Loop(H).
Step4:
- Gently pull the wire in the ceiling junction box and let the wire hang.
- Attach Mounting Plate (D) to the junction box.
- Secure the Mounting Plate (D) by tightening 2 Mounting Screw (C) with a screwdriver.
Step5:
Connect the white wire of the fixture to the white wire of the supply circuit.
Connect the black wire of the fixture to the black wire of the supply circuit.
Connect the Ground fixture wire with the Ground J-Box wire, with the Wire
Connector(A) .
Step6:
Place Canopy(E) onto lip of Mounting Plate(D) and secure with Canopy Nuts(F).
Step7:
1.Install bulbs(not included) into the Socket(Q).