essentiel 180-70miv1 2 Door Refrigerator Instruction Manual

essentiel 180-70miv1 2 Door Refrigerator

Product Information

The ERDV180-70miv1 is a refrigerator with the option to reverse the opening direction of the doors. It comes with pre-installed parts for both left and right door configurations, allowing users to customize the door opening based on their preference.

Specifications:

• Model: ERDV180-70miv1
• Tools required for door reversal: Allen wrench, Cross screwdriver, 5/16 socket and ratchet, Putty knife, Thin-blade screwdriver, Masking tape

Usage Instructions

Step 1: Prepare Tools and Parts
Gather all the tools required for door reversal as listed above. Ensure you have all the necessary parts provided in the accessory package.

Step 2: Remove Existing Door Components
Use the appropriate tools to carefully remove the existing door components such as hinges, screws, and covers from the refrigerator.

Step 3: Install New Door Configuration
Follow the detailed instructions in the manual to install the door components in the desired configuration. Make sure to secure each part properly using the provided screws and accessories.

Step 4: Adjust and Test
Once all parts are securely installed, adjust the door alignment and test the opening and closing mechanism to ensure smooth operation.

FAQ:

• Q: Can I reverse the doors on my ERDV180-70miv1 refrigerator?
  A: Yes, the ERDV180-70miv1 refrigerator comes with all the necessary parts and instructions to reverse the opening direction of the doors.

• Q: Do I need any additional tools to reverse the doors?
  A: No, all the tools required for door reversal are listed in the manual and should be provided by the user for the process.

Tools List

Parts List

Parts to be used for door reverse

Number| Name| Number| Note
1| Right upper hinge| 1| Pre-installed on the refrigerator and to be used when changing the door
2| Right upper hinge cover| 1| Pre-installed on the refrigerator and to be used when changing the door
3| Upper hinge axle sleeve| 1| Pre-installed on the refrigerator and to be used when changing the door
4| Upper hinge screw| 3| Pre-installed on the refrigerator and to be used when changing the door
5| Hole cover| 1| Pre-installed on the refrigerator and to be used when changing the door
6| Middle hinge screw| 2| Pre-installed on the refrigerator and to be used when changing the door
7| Middle hinge| 1| Pre-installed on the refrigerator and to be used when changing the door
8| Hole plug| 2| Pre-installed on the refrigerator and to be used when changing the door
9| Middle beam screw| 1| Pre-installed on the refrigerator and to be used when changing the door
10| Middle beam screw cap| 1| Pre-installed on the refrigerator and to be used when changing the door
---|---|---|---
11| Adjustable foot| 1| Pre-installed on the refrigerator and to be used when changing the door
12| Lower hinge screw| 3| Pre-installed on the refrigerator and to be used when changing the door
13| Lower hinge assembly| 1| Pre-installed on the refrigerator and to be used when changing the door
14| Lower end cover screw of freezing door| 1| Pre-installed on the refrigerator and to be used when changing the door
15| Lower end cover limiting block of freezing door| 1| Pre-installed on the refrigerator and to be used when changing the door
16| Lower end cover screw of the refrigerator door| 1| Pre-installed on the refrigerator and to be used when changing the door
17| Lower end cover limiting block of the refrigerator door| 1| Pre-installed on the refrigerator and to be used when changing the door
18| Upper-end cover axle sleeve of the refrigerator door| 1| Pre-installed on the refrigerator and to be used when changing the door
19| The lower support of the refrigeration door| 1| Pre-installed on the refrigerator and to be used when changing the door
20| Accessory package| 4| Left upper hinge, left upper hinge cover, Self- locking of left door, left decorative cover
21| Self-locking of the right door| 1| Pre-installed on the refrigerator, removed and retained it when changing the door

Installation Instruction

1. Please power off this appliance before conducting this operation.
2. Remove the hinge cover and screw on the top right side of the box, as well as the upper hinge and the hole cover on the left side.
3. Unscrew the hinge screw, take off the middle hinge and the upper shaft sleeve, depart the two hinge hole covers (plug pins) on the middle hinge, and take out the door body of the refrigerator chamber upward.
4. Install the hinge shaft and shaft sleeve to the left hole of the lower hinge, and then the lower hinge to the left corner of the refrigeration adjust foot A according to the position shown in the Figure and finally adjust foot B to the right lower corner of the refrigerator. After completing the assembly.
5. Dismantle the door stop of the two-door bodies and the self-locking screws of the right door, then take out the self-locking of the left door from the accessory bag and install it to the left corner of the door body together with the door stop; take out the bottom support block of the door body of refrigeration chamber and install it to the lower left corner. Finally, take out the hole plug and shaft sleeve for the door of refrigeration chamber adjust their positions, and then install them into the door body; take out the right decorative cover on the door of the refrigeration chamber, and take out the left decorative cover from the accessory bag and install it.
6. Install the door of the refrigerator chamber on the lower hinge, the middle hinge on the left side of the refrigerator and tighten the screws, and place the shaft sleeve well. Install the plug pin in the hole on the middle beam at the other end.
7. Install the door of the freezer on the middle hinge, take out the left upper hinge and the cover for the left upper hinge from the accessory bag, install the left hinge and tighten the screws, install the cover for the left upper hinge and tighten the screw, install the right sensor in the original left hole cover, and then fix the hole cover on the right box.
8. After completing the installation

(The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor)

All information, designs, drawings and pictures in this document are the property of SOURCING & CREATION. SOURCING & CREATION reserves all rights to its brands, designs and information. Any copy and reproduction through any means shall be deemed and considered as counterfeiting.

Protection of the environment

This symbol attached to the product means that it is an appliance whose disposal is subject to the directive on waste from electrical and electronic equipment (WEEE). This appliance may not in any way be treated as household waste and must be subject to a specific type of removal for this type of waste. Recycling and recovery systems are available in your area (waste removal) and by distributors. By taking your appliance at its end of life to a recycling facility, you will contribute to environmental conservation and prevent any harm to your health.

Warranty

Tested in our laboratories
Warranty valid from the date of purchase (receipt as proof of purchase). This warranty does not cover defects or damage caused by improper set-up, incorrect use, or normal wear and tear of this product.

Customer Relations Department
Avenue de la Motte CS 80137 59811 Lesquin cedex.

SOURCING & CREATION
Avenue de la Motte 59810 Lesquin – FRANCE.

Made in Egypt.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>