essentiel b EAMU 216 EASY 2 Wireless Broom Vacuum Cleaner User Guide

essentiel b EAMU 216 EASY 2 Wireless Broom Vacuum Cleaner

Parts List

1. Motorized brush
2. Brush unlock button
3. Tube unlock button
4. Dust container
5. Filter unit
6. Dust container opening button (under the container)
7. Speed selector (2 levels)
8. Battery charge indicator
9. Lithium-ion battery
10. Aluminum tube
11. On/Off button
12. Motor unit
13. Hepa 10 filter
14. Light indicators
15. Wall mount charging base
16. Integrated AC charger on the wall mount
17. Long nozzle
18. Loose nozzle

Contents of the box

• 1 wall-mounted charging base (includes 4 screws and 4 wall plugs), with integrated mains charger
• 1 crevice tool
• 1 upholstery brush
• 1 user guide

Technical Features

• EAMU 216 EASY 2 cordless stick vacuum cleaner
• Rechargeable only at the specified voltage with the supplied battery charger
• Battery: lithium-ion 21.6 V === 2000 mAh
• Motor power: 110 W
• Battery charger:
  • Model: JOD-S-270050GS
  • Input: 100 – 240 V~ 50/60 Hz 0.5 A
  • Output: 27 V === 500 mA 13.5 W
• 2 speeds
• Charging time: 4 hours
• Battery life:
  • Slow speed: 45 minutes
  • Fast speed: 17 minutes
• LED illumination on the brush
• Battery level indicator
• Container capacity: 0.5 L
• Washable class 10 HEPA filter
• Wall-mounted charging base
• Weight: 2.53 kg

Before Initial Use

Remove your appliance and its accessories from its original packaging. Check the appliance for any damage.

Installing the wall bracket
The supplied hardware kit includes wall plugs suitable for solid walls made of concrete, solid brick, stone, etc.

Inspect the partition or wall type where you want to fix the charging base. Make sure that the included fastenings are compatible. If they are not, use expanding wall plugs designed for your type of partition or wall (use special fixings for hollow walls, BA13 plasterboard walls, hollow bricks, etc.). These are not provided in the packaging.

1. Place the base against the wall in the desired location near an electrical outlet (Fig. 1 ). Make sure that the height of the base matches the height of the vacuum cleaner.
2. Trace each of the four holes with a pencil. Use a spirit level to ensure the base is perfectly horizontal (Fig. 2).
3. Drill the four holes.
4. Insert the four supplied wall plugs into the four holes.
5. Place the base against the wall and screw the four screws through the base.
   • Be careful not to pinch or crush the cable between the plastic parts and the wall when tightening the four screws on the base.
   • You can store the crevice tool and the upholstery brush on the wall-mounted base (Fig. 3).

Charging The Battery

After attaching the base to the wall, plug the power supply unit into an easily accessible wall outlet (Fig. 4). Attach the vacuum cleaner to the base at the charging connector.

CHARGE LEVEL INDICATOR

The indicator lights located on the motor unit next to the speed selector indicate its status.

• If the indicator lights are flashing blue, this means that the battery is charging.
• If the indicator lights are off, this means that the battery is fully charged.

WARNING:
do not charge the battery more than necessary to avoid reducing its lifespan.

• The appliance’s performance may be reduced if you do not use the appliance for a long time or if the battery is completely empty. You should fully charge (six hours) and fully discharge the battery two to three times during initial uses.

Battery life after four hours of charging:

• Slow speed: 45 minutes
• Fast speed: 17 minutes
• Charging time for first three uses: 6 hours
  Usual charging time: 4 hours

Note: The vacuum cleaner cannot be operated while charging.

Assembling/Disassembling The Appliance

ASSEMBLING THE VACUUM CLEANER

1. Insert the aluminum tube into the motorized brush until it clicks into place as shown in Figure 5a below:
   To remove the motorized brush from the aluminum tube, press the brush release button and pull the aluminum tube out (Fig. 5b).

2. Insert the motor unit into the aluminum tube until it clicks into place as shown in Figure 6a below:
   To remove the aluminum tube from the motor unit, press the tube release button and pull the tube out (Fig. 6b).

ASSEMBLING/DISASSEMBLING THE ACCESSORIES

You can attach the following accessories to the aluminum tube or directly to the motor unit.

CREVICE TOOL
The crevice tool allows you to reach hard-to-reach areas such as crevices or tight corners. Insert the crevice tool until it clicks into place. To remove the upholstery brush, press the attachment release button (Fig. 7).

UPHOLSTERY BRUSH
The upholstery brush can be used on furniture, picture frames, shelves, etc. Insert the crevice tool until it clicks into place. To remove the upholstery brush, press the attachment release button (Fig. 8).

use

• Before using the vacuum cleaner, make sure that the filters are installed correctly into the body of the appliance. Refer to the “Cleaning and maintenance” section.
• Never use the appliance without the filter or dust container!

1. The vacuum cleaner has two speeds. Press the On/Off button on the handle once (see above figure) to turn on the appliance.
2. To increase suction power in especially dirty areas that require more powerful cleaning, press the speed selector to shift to speed 2 (fast) (see above figure).
3. The battery will last for 45 minutes at normal speed and 17 minutes at fast speed when the battery is fully charged. When the battery is fully charged, all four indicator lights are on. When the battery is low, only one indicator light is on.
4. When you have finished, press the On/Off button to turn off the vacuum cleaner.
5. If necessary, empty and clean the dust container and filter unit (see the “Cleaning and maintenance” section).
6. Place the vacuum cleaner on the charging base to charge it.

Cleaning And Maintenance

• Make sure that the appliance is powered off and unplugged before you start cleaning it.
• Never immerse the appliance or charging base in water or any other liquid.
• Never use solvents, abrasive detergents, or scouring pads to clean the appliance.
• Never use the appliance without the filters.

Emptying and cleaning the dust container
Empty and clean the container when the contents reach the MAX level on the dust container.

EMPTYING THE CONTAINER
Remove the aluminum tube from the body of the appliance. Stand over a waste bin and pull the dust container open button to release the dust container lid (Fig. 9). The lid opens and the waste falls into the bin.

Close the container by pushing the lid up until it clicks into place.

CLEANING THE CONTAINER
Turn the container clockwise towards the (unlocked} symbol to detach it from the motor unit (Fig. 10) and access the filters.

Wash the container with a soft sponge and warm water; let it dry completely before putting it back on the vacuum cleaner (to prevent water from being sucked into the electrical components). Put the container back on the appliance and turn it anticlockwise towards the (locked) symbol.

Cleaning the filters
Grab the filter unit by the tab to remove it from the dust container (Fig. 11).

Rotate the HEPA filter clockwise to remove it from the filter unit (Fig. 12).

Clean the strips by tapping the HEPA filter against a bin and vacuum the excess dust with a vacuum cleaner. Caution: do not rub the filter as this may damage it. Only clean the HEPA filter with water if it is very dirty. Rinse the filter unit with clean water. Let the parts dry completely (at least 24 hours for the HEPA filter) before putting them back on the vacuum (Fig. 13).

Do not wash the filters using hot water or detergent. If the HEPA filter is damaged or you want to replace it, you can get a new one from your retail store.

Do not use your appliance if the filter is damaged as this may cause the appliance to malfunction.

Cleaning the body of the appliance
The surfaces of the appliance can be cleaned with a lightly moistened soft cloth.

Removing and cleaning the motorised brush roller
Press the button on the motorised brush to remove the roller from its drive shaft (Fig. 14).

Remove lint and dust by hand and/or with a cloth. Use scissors to cut long hair and other debris wrapped around the roller (Fig. 15).
You can handwash the roller in hot water with a mild dishwashing detergent. Let the roller dry completely for 24 hours before putting it back in the motorised brush (to prevent water from being sucked into the electrical components).

Troubleshooting Guide

If the appliance malfunctions, it may be due to a minor problem that you can rectify by following the instructions below. Before contacting your retail shop’s after-sales service counter, try the following steps:

The vacuum cleaner is not charging:

• The motor unit is incorrectly positioned on the charging base. Make sure the charging connectors are connected as shown in Figure 4.
• The charging base power cord is not connected. Plug the power unit into a wall plug.

Vacuuming performance is weak or non-existent:

• The dust collector is full and needs emptying.
• The filters are clogged and need cleaning.
• The suction inlet is obstructed. Remove any obstructions.
• The motorised brush is obstructed. Disassemble the brush and remove any obstructions.
• The accessories (aluminum tube, motorised brush, crevice tool, upholstery brush) are obstructed or have been improperly assembled: unclog them or make sure that they are assembled correctly.

The vacuum cleaner stops working after a short period of time:

• The battery is only partially charged. Put the vacuum cleaner on the charging base for approximately four hours to fully charge it. The operating time decreases when you select fast speed (17 minutes of battery life if fully charged).

The motorised brush roller is not rotating:

• The roller is incorrectly positioned. Remove the roller and put it back correctly in the notches provided.
• The motorised brush is obstructed. Disassemble the brush and remove any obstructions.
• One of the parts of the motorised brush is broken. Please contact your retail store after-sales service desk.

If the problem persists, contact your retail store’s customer service department. Do not try to carry out any repairs yourself. Your appliance should only be repaired by qualified maintenance technicians. Poorly-done repairs can be dangerous for the user and are not covered by the warranty.

SPECIFICATIONS

Information published

| Value and precision Unit
---|---
Manufacturer’s name or trademark, commercial registration number, and address| Sourcing & Creation Avenue de la matte 59810 Lesquin – FRANCE
Model identifier| JOD-S-270050GS|
Input voltage| 100-240| V~
Input AC frequency| 50/60| Hz
Output voltage| 27,0| V
Output current| 0,5| A
Output power| 13,5| w
Average active efficiency| 88,10| %
Efficiency at low load (1O %)| 81,41| %
No-load power consumption| 0,068| w

Protection of the environment
This symbol attached to the product means that it is an appliance whose disposal is subject to the directive on waste from electrical and electronic equipment (WEEE). This appliance may not in any way be treated as household waste and must be subject to a specific type of removal for this type of waste. Recycling and recovery systems are available in your area (waste removal) and by distributors. By taking your appliance at its end of lite to a recycling facility, you will contribute to environmental conservation and prevent any harm to your health.

WARRANTY

2-YEAR WARRANTY

Tested in our laboratories
Warranty valid from the date of purchase (receipt as proof of purchase). This warranty does not cover defects or damage caused by improper setup, incorrect use, or normal wear and tear of this product.

Please behave responsibly towards the environment. Recycle this product at the end of its life.

SOURCING & CREATION
Avenue de la Motte 59810 Lesquin – FRANCE.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>