HOOKE ROAD BXG.6033 Ram 1500 Front and Rear Bumper Kit Installation Guide
- June 1, 2024
- HOOKE ROAD
Table of Contents
BXG.6033 Ram 1500 Front and Rear Bumper Kit
RearBumper
BXG.6033
(1)Contents:
Tools required:
a. Drive Socket Ratchet Wrench;
b. 19mm Shallow Socket;
c. 19mm Wrench;
Installation time:
About 1 hour, 2-3 people may be needed. Installation time may differ according
to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE
STARTING INSTALLATION!)
To view the electronic version (BXG.6033), please scan the QR
code.https://drive.google.com/drive/folders/1ygfE72xnEMUevuY-EgAU-
iVFltpI_cn7?usp=sharing
Installation instruction:
Step 1: Remove the factory rear bumper, ready to install our bumper.
Step 2: Assemble the main body & the wings with the M12 30 hex bolt
groups. Tighten up those bolts. Repeat the same installation in another side.
Step 3 : Lift up
the bumper. Install the bumper into your vehicle with the Hex Bolts (M1235),
Split Lock Washer (D12), Flat Washer (M12302), Hex Nuts (M12).
Step 4: The installation is complete. We hope you enjoy a wonderful off-
road life with this quality Hooke Road product!
Attention:
- The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
- Please feel free to contact your distributor if you have any kind of question about your purchase.
Hooke Road to find your parts.
Feel Free To Share Your Vehicle
@HookeRoad4x4
With The Hashtag
#hookeroad If You’d Like
Documents / Resources
|
HOOKE ROAD BXG.6033 Ram 1500 Front and Rear Bumper
Kit
[pdf] Installation Guide
BXG.6033, BXG.6033 Ram 1500 Front and Rear Bumper Kit, Ram 1500 Front and Rear
Bumper Kit, Front and Rear Bumper Kit, Rear Bumper Kit, Bumper Kit, Kit
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>