HOOKE ROAD 07-13-Tundra Tundra Full Width Front Bumper With Skid Plate and LED Lights Installation Guide

HOOKE ROAD 07-13-Tundra Tundra Full Width Front Bumper With Skid Plate

and LED Lights

Specifications

• Model: BXG.5204-S
• Hex Bolt Size: M12*110 (Qty: 4)
• Hex Bolt Size: M12*30 (Qty: 6)
• Button Head Socket Cap Bolts Screws Size: M8*20 (Qty: 6)
• Split Lock Washer Size: 10 (Qty: 10)
• Split Lock Washer Size: 6 (Qty: 6)
• Flat Washer Size: 20 (Qty: 6)
• Flat Washer Size: 10 (Qty: 6)
• Hex Nuts Size: M12 (Qty: 6)
• Hex Nuts Size: M8 (Qty: 10)
• Flange Hex Lock Nuts Size: M8161.2 (Qty: 6)
• Flange Hex Lock Nuts Size: M12302 (Qty: 6)

Tools Required

• A. 14mm HEX Socket Wrench
• B. 19mm HEX Socket Wrench
• C. 18mm Wrench
• D. 5mm HEX Socket Wrench

Installation Time
About 1-2 hours, 2-3 people may be needed. Installation time may differ according to your mechanical skill level.

Installation Instructions

1. Step 1: Remove the original bumper as shown in the picture.
2. Step 2: Assemble the left & right wings and the main body with the Hex Bolts (M1230), Split Lock Washer (D12), Flat Washer (M1230*2), Hex Nuts (M12).
3. Step 3: Install the connecting bracket into the vehicle frame with the factory bolts.
4. Step 4: Install the bumper into your vehicle with the Hex Bolt (M12110), Split Lock Washer (D12), Flat Washer (M1230*2), Hex Nuts (M12).
5. Step 5: Install the skid plate with the Button Head Socket Cap Bolts Screws (M820), Split Lock Washer (D8), Flat Washer (M816*1.2), Flange Hex Lock Nuts (M8).
6. Step 6: The installation is complete. Enjoy your off-road adventures with this quality product!

Attention

• The product parts in this instruction may differ slightly from the actual product contents but generally do not affect the installation of the product.
• Contact your distributor for any questions about your purchase.

FAQ

• Q: Can I install this product on my own?
  A: While it’s possible to install it on your own, it’s recommended to have 2-3 people for easier installation.

• Q: What should I do if some parts are missing?
  A: Please contact your distributor immediately to address any missing parts.

• Q: How do I know if I’ve installed the bumper correctly?
  A: Ensure all bolts are securely tightened and the bumper is aligned properly with your vehicle.

Front Bumper
BXG.5204-S

Contents

Tools required

• 14mm HEX Socket Wrench;
• 19mm HEX Socket Wrench;
• 18mm Wrench;
• 5mm HEX Socket Wrench;

Installation time

About 1-2 hours, 2-3 people may be needed. Installation time may differ according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)

To view the electronic version (BXG.5204-S), please scan the QR code.

Installation instruction:

• Step 1:
  Remove the original bumper. As the picture shown.

• Step 2:
  Assemble the left & right wings and the main body with the Hex Bolts(M1230), Split Lock Washer (D12), Flat Washer (M1230*2), Hex Nuts (M12).

• Step 3:
  Install the connecting bracket into the vehicle frame with the factory bolts.

• Step 4:
  Install the bumper into your vehicle with the Hex Bolt (M12110), Split Lock Washer (D12), Flat Washer (M1230*2), Hex Nuts (M12).

• Step 5:
  Install the skid plate with the Button Head Socket Cap Bolts Screws (M820), Split Lock Washer (D8), Flat Washer (M816*1.2), Flange Hex Lock Nuts (M8).

• Step 6:
  The installation is complete. We hope you enjoy a wonderful off-road life with this quality product!

Attention

1. The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
2. Please feel free to contact your distributor if you have any kind of question about your purchase.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>