HOOKE ROAD BXG.5205-S Tundra Front Bumper With Winch Plate and LED Lights Installation Guide
- June 1, 2024
- HOOKE ROAD
Table of Contents
HOOKE ROAD BXG.5205-S Tundra Front Bumper With Winch Plate and LED Lights
Contents
Tools required
- A. 18mm Wrench
- B. 13mm Wrench
- C. 19mm Socket Wrench
- D. 18mm Socket Wrench
- E. 14mm Socket Wrench
- F. 5mm Hex Socket Wrench
Installation time
About 2 hours, 2-3 people may be needed. Installation time may differ according to your mechanical skill level. (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!) To view the electronic version (BXG.5205-S), please scan the QR code.
Installation instruction
Step 1
Remove the factory front bumper and relative accessories.
Step 2
Install the winch bracket with the factory bolts.
Step 3
Assemble the left, right wings & main body with theHexBolt(M1230), Split Lock
Washer (D12), Flat Washer (M1230*2), HexNuts(M12).
Step 4
Install the light bar bracket into the bumper with the hex bolt (M820), Split
Lock Washer (D8), Flat Washer (M816*1.5), and Flange Hex LockNuts(M8).
Step 5
Install the bumper onto the car frame.
Notes
Tighten up the bolts on both sides after the bumper. Leave a proper distance
between the bumper andthecarframeasthe picture shown.
Step 6
If you have a winch control box, you need to install the winch control box
bracket to fix it on the left or right side. When installing it, please
reserve enough space to use the winch.
Step 7
The installation is complete. We hope you enjoy a wonderful off-road life with
this quality product!
Attention
- The product parts in this instruction may differ slightly from the actual product contents but generally do not affect the installation of the product.
- Please feel free to contact your distributor if you have any kind of questions about your purchase.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>