HOOKE ROAD BXG.8005 Front Bumper With Winch Plate and LED Lights Installation Guide

HOOKE ROAD BXG.8005 Front Bumper With Winch Plate and LED Lights

Specifications:

• Model: BXG.8005

• Contents:

  • 10 Hex Bolts M12*30

  • 10 Split Lock Washer D12

  • 14 Flat Washer M12302

  • 10 Hex Nut M12

  • 6 Hex Bolts M8*20

  • 6 Split Lock Washer D8

  • 6 Flat Washer M8161

  • 6 Flange Hex Lock Nuts M8

  • 4 Flat Washer M6121

  • 4 Button Head Socket Cap Bolts Screws M6*20

  • 4 Flat Washer M6121, 2 Nylon Round Spacer M6121.3

  • 4 Nylon Insert Lock Nut M6, 8 Button Head Socket Cap Bolts
    Screws M4*10

  • 1 L-Wrench

  • 2 EVA Pads

Product Usage Instructions

Tools Required:

• Drive Socket Ratchet Wrench
• 4mm Hex Bit Socket
• 10mm, 13mm, 17mm, 19mm Wrenches
• 13mm, 19mm Shallow Socket

Installation Time:

About 1.5 hours, recommended to have 2-3 people. Installation time may vary based on mechanical skill level.

Installation Instructions:

1. Step 1: Remove the factory front bumper.
2. Step 2: Assemble the wings & the main body using provided Hex Bolts, Split Lock Washers, Flat Washers, and Hex Nuts.
3. Step 3: Install the bull bar into the main body using specified hardware.
4. Step 4: Attach the license plate bracket and install it onto the bumper.
5. Step 5: Optionally install the winch power control box bracket if applicable.
6. Step 6: Mount the bumper onto your vehicle using the provided hardware.
7. Step 7: Complete the installation and enjoy your off-road adventures!

Attention:

• The actual product parts may slightly differ from those listed in the manual but should not impact installation.
• Contact your distributor for any purchase-related queries.

Frequently Asked Questions

Q: How can I get additional assistance with the installation?

A: If you require further help with the installation process, please contact our customer support team or your distributor for guidance.

Q: Can I install this product alone?

A: While it is recommended to have 2-3 people for installation due to the size and weight of the bumper, it is possible to install it alone with proper tools and precautions.

Front Bumper BXG.8005

Contents

PATRS LIST

Tools required

• a. Drive Socket Ratchet Wrench;
• b. 4mm Hex Bit Socket;
• c. 10mm, 13mm, 17mm, 19mm Wrench;
• d. 13mm, 19mm Shallow Socket;

Installation time

About 1.5 hours, 2-3 people may be needed. Installation time may differ according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.8005), please scan the QR code.

Installation instruction

• Step 1 : Remove the factory front bumper, ready to install our product.

• Step 2 : Stick the EVA into the main body. To assemble the wings & the main body. Use the Hex Bolts (M1230), Split Lock Washer (D12), Flat Washer (M1230*2), Hex Nuts (M12). Repeat the same installation in the other side.

• Step 3 : To install the bull bar into the main body. Use the Hex Bolts (M820), Split Lock Washer (D8), Flat Washer (M816*1), Flange Hex Lock Nuts (M8).

• Step 4 : Assemble the license plate bracket (A1, A2, A3) with the M620 button head socket cap bolts screw groups. And then install it into the bumper with the M620 button head socket cap bolts screw groups.

• Step 5 : To install the winch power control box bracket. Use the Hex Bolts (M820), Split lock washer (D8), Flat washer (M816*1), Flange Lock Hex Nuts (M8). This step isn’t 100% necessary. Depends if you have the winch power control box.

• Step 6 : Install the bumper into your vehicle with the Hex Bolt(M1230), Split Lock Washer(D12), Flat Washer(M1225*2), Hex Nuts(M12).

• Step 7 : The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!

Attention:

1. The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
2. Please feel free to contact your distributor if you have any kind of question about your purchase.

Google Hooke Road to find your parts

Documents / Resources

| HOOKE ROAD BXG.8005 Front Bumper With Winch Plate and LED Lights [pdf] Installation Guide
BXG.8005 Front Bumper With Winch Plate and LED Lights, BXG.8005, Front Bumper With Winch Plate and LED Lights, Winch Plate and LED Lights, Plate and LED Lights, LED Lights
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>