HOOKE ROAD BXG.6463 Steel Rear Bumper With LED Floodlights Installation Guide
- June 1, 2024
- HOOKE ROAD
Table of Contents
HOOKE ROAD BXG.6463 Steel Rear Bumper With LED Floodlights
Product Specifications
- Part Name: Rear Bumper
- Contents:
Qty| Part Name| Size(mm)
---|---|---
1| Rear Bumper|
6| Hex Bolt| M1230
12| Flat Washer| M1230*2
6| Split Lock Washer| D12
6| Hex Nuts| M12
Tools Required
- a. 19mm Wrench;
- b. Drive Socket Ratchet Wrench;
- c. 19mm Shallow Socket;
Installation Time
- About 1 hour, 2-3 people may be needed. Installation time may differ according to your mechanical skill level.
- (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)
- To view the electronic version (BXG.6463 & BXG.6463-1), please scan the QR code.
Installation Instructions
- Step 1: Remove the factory rear bumper.
- Step 2: Install the Part B1 & B2 into the bumper with the Hex Bolt(M1230), Split Lock Washer(D12), Flat Washer(M1230*2), Hex Nuts(M12).
- Step 3: Install the bumper into your vehicle with the OEM bolts. Adjust and tighten all bolts.
- Step 4: The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!
Attention:
- The product parts in this instruction may differ slightly from the actual product contents but generally do not affect the installation of the product.
- Please feel free to contact your distributor if you have any kind of questions about your purchase.
Hooke Road to find your parts
FAQ
Q: How do I know if the rear bumper fits my vehicle?
A: Please check the compatibility information provided by Hooke Road or contact your distributor for assistance.
Q: Can I install the rear bumper alone?
A: While possible, it is recommended to have 2-3 people for installation due to the size and weight of the bumper.
Contents
| Qty | Part Name | Size(mm) | Qty | Part Name | Size(mm) |
|---|---|---|---|---|---|
| 1 | Rear Bumper | 6 | Split Lock Washer | D12 | |
| 6 | Hex Bolt | M12*30 | 6 | Hex Nuts | M12 |
| 12 | Flat Washer | M12302 |
Tools required
- a. 19mm Wrench;
- b. Drive Socket Ratchet Wrench;
- c. 19mm Shallow Socket;
Installation time
- About 1 hour, 2-3 people may be needed. Installation time may differ according to your mechanical skill level.
- (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)
- To view the electronic version (BXG.6463 & BXG.6463-1), please scan the QR code.
Installation instruction
- Step 1 : Remove the factory rear bumper.
- Step 2: Install the Part “B1” & “B2” into the bumper with the Hex Bolt(M1230), Split Lock Washer(D12), Flat Washer(M1230*2), Hex Nuts(M12).
- Step 3: Install the bumper into your vehicle with the OEM bolts. Adjust and tighten all bolts.
- Step 4: The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!
Attention:
- The product parts in this instruction may differ slightly from the actual product contents but generally do not affect the installation of the product.
- Please feel free to contact your distributor if you have any kind of questions about your purchase.
Read User Manual Online (PDF format)
Loading......