HOOKE ROAD BXG.8931-S Bronco 2 Door Running Board Side Hoop Step Bars Foot Pedal Installation Guide

HOOKE ROAD BXG.8931-S Bronco 2 Door Running Board Side Hoop Step Bars

Foot Pedal

Specifications:

• Model: BXG.8931-S
• Contents:
  • 8 Hex Bolts Size(mm) M10*20
  • 8 Button Head Socket Cap Bolts Screws M8*25
  • 8 Button Head Socket Cap Bolts Screws M8*20
  • 8 Split Lock Washer D10
  • 16 Split Lock Washer
  • 8 Flat Washer D8 M10202
  • 16 Flat Washer
  • 16 Flange Hex Lock Nuts M8202 M8

Tools required:

• a. Drive Socket Ratchet Wrench;
• b. 16mm Deep Socket;
• c. 16mm Wrench;
• d. 5mm Hex Bit Socket

Installation time:

About 40 minutes, 1-2 people may be needed. Installation time may differ according to your mechanical skill level.

(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)

Installation instructions

1. Driver Side Installation
2. Step 1: Before installation, please remove the side mounting bracket of the original car to install the Hooke Road products. As the picture shown.
3. Step 2: Remove the factory Side Steps, ready to install our product. First, distinguish the mounting bracket A1. NOTE: The horizontal mounting bracket is front.
4. Step 3: Assemble mounting bracket A1 and A2 with the M8*25 button head socket cap bolts screws. Tighten up those bolts.
5. Step 4: Lift up the mounting bracket into the position. Make sure that mounting locations are correct.
6. Step 5: Install the mounting bracket to your vehicle with M10*20 hex head screws, Tighten up those bolts.
7. Step 6: Assemble mounting bracket and main body with the M8*20 button head socket cap bolts screws.
8. Step 7: Repeat the same procedure on the passenger side.
9. Step 8: The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!

Attention:

1. The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
2. Please feel free to contact your distributor if you have any kind of question about your purchase.

FAQ

Q: How do I know if I have assembled the parts correctly?

A: Ensure that all parts are securely fastened according to the provided instructions. Double-check each step before proceeding to the next.

Q: Can I install these side steps alone?

A: While it’s recommended to have 1-2 people for installation, it’s possible to install them alone with proper tools and precautions.

Side BXG.8931-S

Contents

Tools required

• a. Drive Socket Ratchet Wrench;
• b. 16mm Deep Socket;
• c. 16mm Wrench;
• d. 5mm Hex Bit Socket

Installation time

About 40 minutes, 1-2 people may be needed. Installation time may differ according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)

To view the electronic version (BXG.8931-S), please scan the QR code.

Installation instruction

Driver Side Installation

• Step 1: Before installation, please remove the side mounting bracket of the original car to install the Hooke Road products. As the picture shown.|

• Step 2: Remove the factory Side Steps, ready to install our product.
  First, distinguish the mounting bracket A1. NOTE: The horizontal mounting bracket is front.

• Step 3: Assemble mounting bracket A1 and A2 with the M8*25 button head socket cap bolts screws. Tighten up those bolts.

  • (4) M8*25 Button Head Socket Cap Bolts Screws
  • (4) D8 Split Lock Washer
  • (4) M8202 Flat Washer
  • (4) M8 Flange Hex Lock Nuts

• Step 4: Lift up the mounting bracket into the position. Make sure that mounting locations are correct.

• Step 5: Install the mounting bracket to your vehicle with M10*20 hex head screws, Tighten up those bolts.

• Step 6: Assemble mounting bracket and main body with the M8*20 button head socket cap bolts screws.

• Step 7: Repeat the same procedure on the passenger side.

• Step 8: The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!

Attention

1. The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
2. Please feel free to contact your distributor if you have any kind of question about your purchase.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>