HOOKE ROAD 18-20 F150 Guardian Front Bumper LED Lights Installation Guide

HOOKE ROAD 18-20 F150 Guardian Front Bumper LED Lights

Specifications:

• Model: BXG.8256
• Contents:
  • 4 Hex Bolts M12*35
  • 6 Hex Bolts M12*30
  • 4 Button Head Socket Cap Bolts Screws M6*20
  • 12 Split Lock Washer D12
  • 16 Flat Washer M12302
  • 4 Flat Washer M6121
  • 2 Nylon Round Spacer M6121.3
  • 6 Hex Nuts M12
  • 4 Nylon Insert Lock Nut
  • 2 Nut Plate
  • 2 Internal Tooth Star Lock Washers M6
  • 2 Internal Tooth Star Lock Washers M12
• Tools Required:
  • Drive Socket Ratchet Wrench
  • 4mm Hex Bit Socket
  • 10mm, 19mm Wrench
  • 19mm Shallow Socket
• Installation Time: About 1.5 hours, 2-3 people may be needed.

Product Usage Instructions

Step 1: Remove the factory front bumper

Before starting the installation, remove the existing front bumper to prepare for the installation of the new product.

Step 2: Connect the wings to the main body

Using the M12*30 hex bolts, attach the wings to the main body of the product. Repeat this process on the other side as well.

Step 3: Install the license plate bracket

If required, assemble the license plate bracket using M620 button head socket cap bolts and nuts. Secure the bracket into the main body using M620 screws as indicated in the diagram.

Step 4: Secure the Nut Plate and internal tooth star lock washers

Prior to installing the bumper, use internal tooth star lock washers to secure the Nut Plate in the center installation position on the bar. Repeat this step on both sides.

Step 5: Attach the bumper to the vehicle

Lift the bumper and align it with the designated holes. Secure the bumper to the vehicle by utilizing M12 bolts and nuts.

Step 6: Complete the installation

Once the bumper is securely attached, your installation is complete. Enjoy your off-road adventures with this high-quality Hooke Road product!

Attention:

1. The parts in this instruction may slightly differ from the actual product contents but should not affect installation.
2. If you have any questions regarding your purchase, feel free to contact your distributor.

Frequently Asked Questions

Q: How long does it take to install the front bumper?

A: The estimated installation time is about 1.5 hours, with 2-3 people recommended for assistance. Actual time may vary based on mechanical skill level.

Q: Can I use different tools than those listed in the manual for installation?

A: It is recommended to use the specified tools for installation to ensure proper assembly and fit of the front bumper.

Front Bumper BXG.8256

Contents

Tools required

• a. Drive Socket Ratchet Wrench;
• b. 4mm Hex Bit Socket;
• c. 10mm, 19mm Wrench;
• d. 19mm Shallow Socket;

Installation time

About 1.5 hours, 2-3 people may be needed. Installation time may differ according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.8256), please scan the QR code.

Installation instruction

• Step 1: Remove the factory front bumper, ready to install our product.

• Step 2: First, in the initial step, connect the wings to the main body using M12*30 hex bolts. Repeat the same procedure on the other side.

• Step 3: If you need to install the license plate bracket, first you need to use M620 button head socket cap bolts and nuts to assemble the license plate bracket. Then, use M620 screws to secure it into the main body, as shown in the diagram.

• Step 4: Before installing the bumper, use internal tooth star lock washers Retaining to secure the Nut Plate to the center installation position on the bar. Repeat the same procedure on the other side.

• Step 5: Lift the bumper, align it with the holes, and secure the bumper to the vehicle by using M12 bolts and nuts.

• Step 6: The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!

Attention

1. The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
2. Please feel free to contact your distributor if you have any kind of question about your purchase.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>