Hooke Road BXG.6001-1S Ram 1500 Front and Rear Bumpers Set Installation Guide

: June 1, 2024
: HOOKE ROAD

Table of Contents

Contents:
Tools required:
Installation time:
Installation instruction:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BXG.6001-1S Ram 1500
Front and Rear Bumpers Set
Installation Guide

Qty	Part Name	Size(mm)
12	Hex Bolt	M12*30
2	Hex Bolt	M10*30
4	Hex Bolt	M8*20
4	Button Head Socket Cap Bolts Screws	M8*20
12	Split Lock Washer	D12
2	Split Lock Washer	D10
8	Split Lock Washer	D8
24	Flat Washer	M12302
2	Flat Washer	M10252
8	Flat Washer	M8202
12	Hex Nut	M12
2	Flange Hex Lock Nuts	M10
8	Flange Hex Lock Nuts	M8
2	Plastic Hand Knobs	M8

Tools required:

a.16mm & 19mm Socket Wrench
b.19mm & 13mm Wrench
c. 5mm Hex Bit Socket;H

Installation time:

About 2 hours, 2-3 people may be needed. Installation time may differ according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.6001-1S), please scan the QR code.

Hooke Road BXG 6001 1S Ram 1500 Front and Rear Bumpers Set - Qr
code https://drive.google.com/drive/folders/1_
aDfoAhfrSMfwEsH1LY67Q1qMZ3eQxq2?usp=share_link

Installation instruction:

Step 1:
Remove your original front bumper. Hooke Road BXG 6001 1S Ram 1500 Front and
Rear Bumpers Set - original front bumper

Step 2: Assemble the wings & the main body with the Hex Bolt (M1230), Split Lock Washer (D12), Flat Washer (D1230*2), Hex Nut (M12).

Hooke Road BXG 6001 1S Ram 1500 Front and Rear Bumpers Set - wings & the
main body

Step 3: Install the bull bar into the bumper with the Hex Bolt (M820), Split Lock Washer (D8), Flat Washer (M820*2), Flange Hex Lock Nuts (M8).

Hooke Road BXG 6001 1S Ram 1500 Front and Rear Bumpers Set - bumper with the
Hex Bolt

Step 4: Install the iron mesh into the bumper with the Plastic Hand Knobs (M8).

Hooke Road BXG 6001 1S Ram 1500 Front and Rear Bumpers Set - Plastic
HandKnobs

Step 5: This step is not necessery. If you are use the winch control box, place install the bracket with the Button Head Socket Cap Bolts Screws (M820), Split Lock Washer (D8), Flat Washer (M820*2), Flange Hex Lock Nuts (M8).

Hooke Road BXG 6001 1S Ram 1500 Front and Rear Bumpers Set - Flange Hex
LockNuts

Step 6: Install the winch bracket into the vehicle frame. Hooke Road BXG
6001 1S Ram 1500 Front and Rear Bumpers Set - winch bracket into the vehicle
frame Notes : Upper holes use the Hex Bolt (M1030), Split Lock Washer (D10), Flat Washer (M10252), Hex Nut (M10).
Bottom holes use the Hex Bolt (M1230), Split Lock Washer (D12), Flat Washer (M12302), Hex Nut (M12).

Hooke Road BXG 6001 1S Ram 1500 Front and Rear Bumpers Set -
Bolt

Step 7: Install the license plate bracket into the bumper with the Button Head Socket Cap Bolts Screws (M820), Split Lock Washer (D8), Flat Washer (M820*2), Flange Hex Lock Nuts (M8).

Hooke Road BXG 6001 1S Ram 1500 Front and Rear Bumpers Set - plate
bracket

Step 8:
Place the bumper into the car frame and tighten up the Hex Bolt (M1230), Split Lock Washer (D12), Flat Washer (M1230*2), Hex Nut (M12).

Hooke Road BXG 6001 1S Ram 1500 Front and Rear Bumpers Set - frame and
tighten

The same operation for the other side.

Step 9:
The installation is complete. We hope you enjoy a wonderful off-road life with this quality product! Hooke Road BXG 6001 1S Ram 1500 Front and Rear Bumpers
Set - wonderful off-road

Attention:

The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
Please feel free to contact your distributor if you have any kind of question about your purchase.

Hooke Road to find your parts

@HookeRoad4x4
Post Your Jeep/Truck
w/Hashtag #hookeroad to Win Discount Every Week