ELMAG AKM 1.2mm Motorised Beading Machine User Guide
- June 1, 2024
- ELMAG
Table of Contents
ELMAG AKM 1.2mm Motorised Beading Machine
Product Information
Specifications
- Max. Plate Thickness: 1.25 mm
- Shank Length: 250 mm
- Rolls Diameter: 62 mm
- Rotational Speed: 32 rpm
- Motor Power: 700 W
- Voltage: 400/50 V/Hz
- Dimensions (LxWxH): 700 mm x 600 mm x 1300 mm
- Weight: 170 kg
Product Usage Instructions
Overview
- The motorised beading machine is designed for producing profiles from flat or cylindrical sheets by embossing depressions (beads) to increase rigidity and enable form-fitting longitudinal assembly of pipes.
Operation
- Adjust the depth stop according to the desired deformation strength.
- Insert the metal sheet and ensure it is pushed through completely.
- Press the idle roller lightly and start the drive roller.
- Gradually feed in the idle roller while the plate runs through the machine multiple times.
Maintenance
- Regularly clean the machine and lubricate moving parts to ensure smooth operation.
- Check for any loose components and tighten if necessary.
FAQ
- Q: Can I use special roller sets with this machine?
- A: Yes, special roller sets are available as accessories for this beading machine to cater to specific profiling needs.
- Q: How do I adjust the depth stop for precise sheet guidance?
- A: The depth stop can be adjusted by turning the adjustment knob to control how far the rollers press into the metal sheet during operation.
MOTORISED BEADING MACHINE
- AKM 1.2 mm
- Article Number: 83172
- EAN Code: 9004853831720
TECHNICAL FACTS
- Light, a motorized beading machine with gear motor 700 Watt
- Processable sheet thickness up to 1.25 mm
- Mobile control column with emergency stop
- Double foot pedal for right/left rotation
- Adjustable, ground depth stop for precise sheet guidance
- Roller with mechanical adjusting device
- Sturdy cast iron frame
- Machine frame with tool compartments
- With five standard roller sets
- Special roller sets available as special accessories
PRODUCT HIGHLIGHTS
Manual and motorised beading machines
- Beading machines enable the production of profiles from flat or cylindrical sheets – for example, by embossing depressions (beads) that increase the rigidity and enable form-fitting longitudinal assembly of pipes.
- The required profile is pressed into the metal sheet with the aid of embossing rollers. The rollers have a positive and a negative profile and can be changed over quickly.
- Beading machines are equipped with an adjustable depth stop. The flat or cylinder plate is pushed through as far as it will go, the idle roller is pressed lightly and the drive roller is set in motion.
- While the plate runs several times through the machine, the idle roller is gradually fed to achieve a sufficiently strong deformation (beading, flanging or drawing depth).
Standard features
- 5 standard roller sets
- Mechanical adjustment device
- Adjustable depth stop
- Machine frame
- Mobile operating column with foot pedal
- Operating instructions / CE
Special accessories
- Special roller sets
SPECIFICATIONS
Max. plate thickness| 1.25 mm
Shank length| 250 mm
rolls diameter| 62 mm
rotational speed| 32 rpm
motor power| 700 W
voltage| 400/50 V/Hz
Length| 700 mm
Width| 600 mm
Height| 1300 mm
Weight| 170 kg
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>