ELMAG DM 250 ROHM Four Jaw Lathe Chuck Instructions
- June 1, 2024
- ELMAG
Table of Contents
RÖHM FOUR-JAW LATHE CHUCK
DM 250, DIN
6350
Steel body
Article Number: 88995
EAN Code: 9004853889950
TECHNICAL FACTS
-
Reliable, high-quality flat spiral chucks for universal use
-
Centrally clamping three and four-jaw chucks to DIN 6350 for high clamping forces and loads due to heavy workpieces, high speeds and high cutting performance
-
Very robust cast iron (ZG) or steel body (ZS), low profile
-
With cylindrical centring holder (size B, C)
-
Round and axial runout according to DIN 6386
-
Very good repeatable clamping accuracy
-
For use on lathes, rotary tables, dividing heads, etc.
-
Through hole for bar machining
-
One set each of drilling and turning jaws, hardened and ground:
– 3 or 4 pcs. drilling jaws BB stepped outwards
– 3 or 4 pcs. DB turning jaws stepped inwards -
With clamping wrench and fastening screws
PRODUCT HIGHLIGHTS
RÖHM-Vjaw lathe chucks ZG4 and ZS4jaw four-jaw lathe chucks
Four-jaw lathe chucks are particularly suitable for holding square, polygonal
and shaped turning elements that cannot be clamped in three-jaw lathe chucks
Lathe chuck handling
– Smooth-running, quick clamping without particular force
– Clamping jaws adjustable over the entire clamping range, reversible and
exchangeable
– Easy lubrication
Cast body versus steel body
– Cast body models ZG3 and ZG4: slightly cheaper, speed limit adjusted to
permissible peripheral speed for cast iron
– Steel body models ZS3 and ZS4:
High load capacity, significantly more speed
SPECIFICATIONS
| inch | 10 |
|---|---|
| rotational speed max. | 3000 rpm |
| moment of torque at key | 150 Nm |
| total clamping force | 63 kN |
| outer voltage Ø size A1 BB | 5 – 122 mm |
| outer voltage Ø size A2 DB | 5 – 122 mm |
| outer voltage Ø size A3 DB | 73 – 190 mm |
| outer voltage Ø size A4 DB | 131 – 250 mm |
| inside voltage Ø size J1 | 59 – 165 mm |
| inside voltage Ø size J2 | 119 – 236 mm |
| Circulation diameter | 302 mm |
| rotating feed outer diameter | 250 mm |
| centre holding diameter | 200 mm |
| deep centre holding | 5 mm |
| Body height | 82 mm |
| passage drill diameter | 76 mm |
| hole circle diameter | 224 mm |
| centre flange thread | 3 x M12 |
| Jaw length | 90 mm |
| jaw high overstand | 40 mm |
| Wrench width | 12 mm |
| drive high | 26.5 mm |
| Weight | 25.7 kg |
COMPRESSED AIR TECHNOLOGY WELDING TECHNOLOGY METALWORKING STONE CUTTING
TECHNOLOGY WORKSHOP TECHNOLOGY POWER GENERATORS
13.04.2024 – 3/3
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>