ELMAG WPMEH 100-2 Hydraulic Workshop Press XL Premium User Guide
- June 1, 2024
- ELMAG
Table of Contents
ELMAG WPMEH 100-2 Hydraulic Workshop Press XL Premium User Guide
Specifications:
- Press Power Max: 100 t
- Drive: Electrohydraulic drive
- Drive Speeds: Two speeds
- Hydraulic Cylinder: Laterally adjustable
- Handpump: Manual operation
- Press Table: Chain for height adjustment
- Oil Flow: 5.64 / 17.2 l/min
- Piston Speed: 7.54 / 2.47 mm/s
- Return Travel Speed: 9.06 mm/s
- Motor Power: 2200 W
- Voltage: 400/50 V/Hz
- Machine Height: 2140 mm
- Machine Length without Pump: 1350 mm
- Machine Width: 755 mm
- Inlet Length: 1100 mm
- Beam Width Inlet: 300 mm
- Inlet Height Max: 930 mm
- Machine Length with Pump: 1665 mm
- Machine Width with Pump: 865 mm
- Piston Stroke: 380 mm
- Weight: 970 kg
-
Product Usage Instructions
Setup:
- Ensure the press is placed on a stable and level surface.
- Connect the machine to a power source with the specified voltage.
- Adjust the press table height using the chain as needed for your workpiece.
Operation:
- Turn on the machine using the on/off control valve.
- Adjust the drive speed based on your requirements.
- Position your workpiece between the press table and cylinder piston.
-
- Use the handpump to apply hydraulic pressure to press your workpiece.
Frequently Asked Questions (FAQ):
Q: What should I do if the press does not operate as expected?
A: Check the power connection, hydraulic fluid levels, and ensure all
safety features are engaged before troubleshooting further.
Q: Can I use this press for heavy-duty applications?
A: Yes, the press has a maximum press power of 100 tons, suitable for
various heavy-duty tasks.
Q: How do I maintain this hydraulic workshop press?
A: Regularly check for leaks, lubricate moving parts, and follow the
maintenance schedule outlined in the user manual to ensure optimal
performance.
Article Number: 81816
EAN Code: 9004853818165
INSTRUCTION
TECHNICAL FACTS
PRODUCT HIGHLIGHTS
Standard features
- Overload safety valve
- Compression pressure gauge
- On/off control valve
- Cylinder piston, chrome-plated
- Press table with locking pin
- Operating instructions/CE
SPECIFICATIONS
press power max.| 100 t
electorhydraulic drive| Yes
---|---
two drive speeds| Yes
hydraulic cylinder laterally adjustable| Yes
manuel handpump| Yes
press table chain (height adjustment)| Yes
oil flow step 1/2| 5.64 / 17.2 l/min
piston speed step 1/2| 7.54 / 2.47 mm/s
Return travel speed| 9.06 mm/s
motor power| 2200 W
voltage| 400/50 V/Hz
machine height| 2140 mm
machine length without pump| 1350 mm
machine width| 755 mm
inlet length| 1100 mm
beam width| 300 mm
inlet height max.| 930 mm
machine length with pump| 1665 mm
machinewidth with pump| 865 mm
Piston stroke| 380 mm
Weight| 970 kg
ELMAG® – Start-up Service
Including ELMAG®-Quality Check
- Depreservation, degreasing and de-securing
- Assembly until ready for use
- Oil filling of gearboxes, oil baths and central lubrication systems
- Testing of electrics, safety components and devices
- Test run on all shift and power levels
- 30-minute test run at the highest power level
- Checking and, if necessary, adjustment of machine tolerances,
-
-
- e.g. V-belt tension and spindle concentricity
-
- Testing of all machine functions
For lathes, in addition:
- Lathe chuck reassembly with marking of minimum tolerance
- Measurement of the spindle nose to tolerance < 0.01 mm
- Measurement of the lathe chuck
-
- Setting the tailstock parallelism
For MIG/MAG/MMA/WIG welding, plasma cutting & induction heating equipment (depending on the type of equipment)
- Assembly of the unit, chassis assembly
- Intermediate hose assembly
- Mais plug assembly and gas hose assembly
- Connection preparation for gas or compressed air
- Control cable plug Assembly on hose assembly
- Installation & activation of water cooling unit for modular systems
- Filling with cooling liquid for liquid-cooled units
-
-
- Short test run or test welding
-
COMPRESSED AIR TECHNOLOGY
WELDING TECHNOLOGYMETALWORKING
STONE CUTTING TECHNOLOGY
WORKSHOP TECHNOLOGY
POWER GENERATORS
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>