ELMAG WPMH 50 Hydraulic Workshop Press User Guide

ELMAG WPMH 50 Hydraulic Workshop Press

Hydraulic Workshop Press Premium WPMH 50

Specifications

• Press Power: 50 tons
• Hydraulic Drive: Yes
• Handpump: Yes
• Foot Pedal for Pump : Yes
• Two Drive Speeds : Yes
• Automatic Piston Return : Yes
• Hydraulic Cylinder Laterally Adjustable: Yes
• Press Table Turning (Height Adjustment): Yes
• Pillar Model Machine Height: 2025 mm
• Machine Length without Pump: 910 mm
• Machine Width: 764 mm
• Inlet Length: 750 mm
• Beam Width Inside Inlet: 300 mm
• Inlet Height Min. / Max.: 1060 mm / 160 mm
• Piston Stroke : 1085 mm
• Machine Length with Pump : 340 kg

Product Usage Instructions

Safety Precautions:

Before using the hydraulic workshop press, ensure you have read and understood the operating instructions provided.

Setting Up:

a. Place the press on a stable and level surface.

b. Ensure all components are properly connected and secured.

Operating the Press:

a. Use the handpump or foot pedal to activate the hydraulic drive.

b. Adjust the press table height as needed for your workpiece.

c. Ensure the overload safety valve is set correctly before applying pressure.

Maintenance:

a. Regularly check for any leaks in the hydraulic system.

b. Keep the press clean and free from debris to ensure optimal performance.

FAQ

• Q: Can I use this press for bending metal?
  • A: Yes, the hydraulic workshop press can be used for bending metal with the appropriate tooling and setup.
• Q: Is it necessary to lubricate the press components?
  • A : It is recommended to lubricate moving parts to ensure smooth operation and prolong the life of the press.

TECHNICAL FACTS

• With foot pedal and hand pump

• Hydraulic cylinder laterally adjustable

• Fine adjustment of compression pressure

• Manual hydraulic presses

• Bending and aligning axes, shafts and profiles
  Pressing in/driving out bearings, bushes, pins, shafts, keyways Pressing pipes

• Punching with special punches

• Very good suitability for stress test, material and weld seam tests

• Inlet sizes of max. 550 x 550 to max. 790 x 1,030 mm

• Hole guide frame with locking pin for press table adjustment

• Single models with press table winch for manual height adjustment Hydraulic cylinder with longitudinal movement

• Pressure build-up by means of hand pump, very precise hydraulic system Manual changeover between idling and working speed

• Automatic piston return

• Overload safety valve

• Compression gauge

• Chrome-plated cylinder piston

• Two-piece press table support with support blocks in V-shape

• Robust welded construction

PRODUCT HIGHLIGHTS

Standard features

• Overload safety valve
• Compression gauge
• Chrome-plated cylinder piston
• Press table with locking pin
• Support blocks in V shape
• Operating instructions / CE

SPECIFICATIONS

• COMPRESSED AIR TECHNOLOGY
• WELDING TECHNOLOGY
• METALWORKING STONE
• CUTTING TECHNOLOGY
• WORKSHOP TECHNOLOGY
• POWER GENERATORS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>