Satechi MO2145 Magnetic Wireless Charger User Manual
- August 17, 2024
- SATECHI
Table of Contents
Satechi MO2145 Magnetic Wireless Charger
USER MANUAL
Instructions:
1. Connect the wireless charger with suitable power supply by using the
Type-C charging cable provided. Recommended rating 9V/3A, minimum 9V/2A,
charging speed varies based on power input and number of devices being
recharged.
2. Place the mobile device in the centre of the wireless charging receiver to
start charging.
Note: A minimum 9V/2A input is required for 15W wireless output, if below 9V input only 5W wireless output is achievable. 9V/3A output adapter is required if charger is to be used for 3 charging devices simultaneously. The charging speeds may vary per device and dependent on the type of power source employed.
Indication lights:
After power is connected the red light is turned on, the charger is in standby mode. When the blue light is on , this indicates the device is being charged. If there are metal objects on top of the charging surface, the blue and red lights will flash alternately.
(Two indication lights do not represent the charging status of Apple Watches. Please check the display of the Apple Watch during charging.)
Product parameters:
Input: DC 9V/3A, 9V/2.22A, 5V/2A
Wireless Output of left magnetic charging pad: 5W/7.5W/10W/15W (Max)
Wireless Output of right charging pad: 5W (Max)
Wireless Output for Apple Watch only: 2.5W (Max)
Wireless distance: ≤5mm
Cautions:
1. Metal objects placed on top of the charging devices might result in
malfunction of the item and damage to the charging device. Do not operate the
item on top of any metal worktable or surface.
2. Charging speed varies with power source rating.
3. Working environment temperature 0~+35℃ and storage environment temperature
-20~+50℃.
4. Do not disassemble this product.
5. Do not use this product at high temperatures or in a humid environment,
please keep away from fire and water.
6. If the mobile phone does not have wireless reception function, please
purchase another wireless charging receiver for use.
7. If the mobile phone does not support fast wireless charging function, it
will automatically adjust to its own charging capabilities.
(2014/53/EU art. 10-8)
(a) Frequency Rang e; 105- 205 kHz
(b) Wireless Power; 15 W Max.
(2014/53/EU art. 10-9 Simplifi ed Declar ation of Conformity)
Hereby, MOB, declares that item MO2145 complies with the essenti al req uirements and other relevant conditi ons of Dir ective 2014/53/EU. The full text of the EU declar ati on of conformity is availabl e at the foll owing i nternet addr ess: www.momanual.com.
MOB, PO BOX 644, 6710 BP (NL).
FAQ:
Q: What should I do if the charging speed is slow?
A: Ensure that the power input meets the minimum requirements for the desired wireless output. Remove any metal objects from the charging surface for optimal performance.