ELMAG VS 370 H Metal Circular Saw User Guide
- June 1, 2024
- ELMAG
Table of Contents
ELMAG VS 370 H Metal Circular Saw User Guide
TECHNICAL FACTS
- VS 370 H
- Hydraulic system with high clamping pressure
- Angle locks at 45-0-45 °
- Cutting range max. 170×100 mm
- Material support with two rollers
PRODUCT HIGHLIGHTS
VS models
Modern, semi-automatic vertical circular saws with pneumatic or hydraulic quick-release vice, automatic feed and cutting pressure control. Semi- automatic cutting cycle with high throughput.
- Cutting depth adjustable with nubs
- Quick angle adjustment: swivel gear head with angle scale and locks
- Double-sided clamping – quick-action vice with anti-burr workpiece holder
- High performance: high-performance motor with two speed settings for hard/soft materials
- Smooth-running and durable: Quality gear unit with oil bath for permanent lubrication
- Feed can be optimised at any time: with infinitely adjustable cutting pressure control
METAL CIRCULAR SAW
- Optimal saw blade guide: Cooling system with electric pump, dosing valve and return filter
- Chip clearer for saw blade cleaning
- Highest repeatability: bar lock with adjustable material stop
- Safe: saw blade protection/guard, emergency stop, zero-voltage release, CE-compliant
Standard features
- VS metal circular saw
- H-Auto H hydraulics, semi-automatic
- Chip remover saw blade cleaning
- Material support with two rollers
- Bar lock with material stop
- GKS swivel gear head
- Angle scale and angle locks
- Vertical stroke/cutting depth adjustable
- SSS quick-action vice
- Anti-burr workpiece holder
- SSP quick-release hydraulic clamp
- High performance drive/oil bath transmission
- Central operating panel
- SDS cutting pressure control
- Cooling system with electric pump
- Fixed protective grille
- Emergency stop/zero voltage release
- Steel plate base and chip tray
- Tools/Operating instructions/CE
Semi-automatic cutting cycle
- Cycle start from operating panel
- Fix material/close clamp
- Saw blade drive on
- Lower gear head/cut
- Saw blade drive off
- Raise/reset gear head
- Release workpiece/open clamp
SPECIFICATIONS
round tube cutting range at 0°| Max. 120 mm
METAL CIRCULAR SAW
| round tube cutting range at 45° right winged mitre | Max. 120 mm |
|---|---|
| square tube cutting range at 0° | Max. 100 mm |
| square tube cutting range at 45° right winged mitre | Max. 100 mm |
| rectangle tube cutting range at 0° | Max. 170×100 mm |
| rectangle tube cutting range at 45° right winged mitre | Max. 130×100 mm |
| sawblade outside diameter | 370 mm |
| sawblade inside diameter | 32 mm |
| vise span max. | 185 mm |
| Cutting angle | 45-0-45 ° |
| speed level 1 / 2 | 25 / 50 rpm |
| engine power speed level 1 / 2 | 1900 / 2500 W |
| voltage | 400/50 V/Hz |
| infeed height for runways | 908 mm |
| Length | 2640 mm |
| Width | 1200 mm |
| Height | 1850 mm |
| Weight | 500 kg |
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>