ELMAG HP 130 V CNC Hydraulic Vice Owner’s Manual
- June 1, 2024
- ELMAG
Table of Contents
ELMAG HP 130 V CNC Hydraulic Vice
Product Information
Specifications
- Chuck jaw width: 130 mm
- Chuck jaw height: 55 mm
- Span: 0 – 180 mm
- Clamping force: 0 – 46 kN
- Max. clamping force additional down effect: 52 kN
- Weight: 38 kg
Technical Facts
Mechanical-hydraulic clamping, high clamping force hold-down system (additional pull-down NZ 50% of the clamping force) High-strength nodular cast iron, tensile strength 600 N/mm2 Hardened and ground guideways, hardness 45 HRC Hardened clamping jaws, ground, interchangeable Positioning accuracy 0.02 mm, parallelism 0.015 mm High clamping repeatability, including in parallel operation Can be used four times, both vertically and horizontally Spindle cover to protect against chips and dirt
Product Highlights
Good clamping is half the battle: High-quality clamping device for quick and safe clamping on drills and milling machines.
Product Usage Instructions
- Ensure the CNC hydraulic vice is securely mounted on the workbench or machine table.
- Adjust the chuck jaw width and height according to the size of the workpiece to be clamped.
- Use the span adjustment to set the distance between the chuck jaws within the range of 0 – 180 mm.
- Apply the required clamping force using the hydraulic mechanism. The maximum clamping force is 46 kN with an additional down effect of 50% for a total of 52 kN.
- Verify the positioning accuracy and parallelism to ensure proper clamping of the workpiece.
- For repeated operations, utilize the high clamping repeatability feature, suitable for both vertical and horizontal orientations.
- After usage, clean the spindle cover to protect it against chips and dirt for longevity.
FAQ
- Q: Can this CNC hydraulic vice be used for both vertical and horizontal applications?
- A: Yes, the CNC hydraulic vice can be used four times, both vertically and horizontally.
- Q: What is the material of construction for the chuck jaws?
- A: The chuck jaws are made of hardened clamping jaws that are ground and interchangeable.
Product Information
TECHNICAL FACTS
- Mechanical-hydraulic clamping, high clamping force
- hold-down system (additional pull-down NZ 50% of the clamping force)
- High-strength nodular cast iron, tensile strength 600 N/mm2
- Hardened and ground guideways, hardness 45 HRC
- Hardened clamping jaws, ground, interchangeable
- Positioning accuracy 0.02 mm, parallelism 0.015 mm
- High clamping repeatability, including in parallel operation
- Can be used four times, both vertically and horizontally
- Spindle cover to protect against chips and dirt
PRODUCT HIGHLIGHTS
Product description
Good clamping is half the battle: High-quality clamping device for quick and safe clamping on drills and milling machines.
SPECIFICATIONS
| Chuck jaw width | 130 mm |
|---|---|
| Chuck jaw height | 55 mm |
| Span | 0 – 180 mm |
| Clamping force | 0 – 46 kN |
| Max. clamping force | 52 kN |
| additional down effect 50 % tension | 50 kN |
| Weight | 38 kg |
- COMPRESSED AIR TECHNOLOGY
- WELDING TECHNOLOGY
- METALWORKING
- STONE CUTTING TECHNOLOGY
- WORKSHOP TECHNOLOGY
- POWER GENERATORS