ELMAG VS 315-PL Metal Circular Saw User Guide
- June 1, 2024
- ELMAG
Table of Contents
ELMAG VS 315-PL Metal Circular Saw
Product Information
Specifications
- Article Number: 78041
- EAN Code: 9004853780417
- Speed: 17/34 rpm
- Power Source: Pneumatic
- Tooth Pitch: T6
Product Highlights
The VS 315-PL is a modern, semi-automatic vertical circular saw featuring pneumatic quick-release vice, automatic feed, and cutting pressure control. It offers a semi-automatic cutting cycle with high throughput and various features for efficient cutting.
- Cutting depth adjustable with nubs
- Quick angle adjustment with swivel gear head and angle scale
- Double-sided clamping with quick-action vice and anti-burr workpiece holder
- High performance motor with two speed settings for hard/soft materials
- Quality gear unit with oil bath for smooth operation and durability
- Infinitely adjustable cutting pressure control for optimized feed
Product Usage Instructions
Semi-Automatic Cutting Cycle:
- Start the cutting cycle from the operating panel.
- Fix the material and close the clamp securely.
- Turn on the saw blade drive.
- Lower the gear head to start cutting.
- Turn off the saw blade drive after cutting is complete.
- Raise or reset the gear head.
- Release the workpiece and open the clamp to remove it.
Optimal Saw Blade Guide:
The saw blade guide system includes a cooling system with an\ electric pump, dosing valve, and return filter to ensure proper blade maintenance during operation.
Safety Features:
- Bar lock with adjustable material stop for highest repeatability
- Saw blade protection/guard, emergency stop, zero-voltage release for safety compliance
FAQ
- Q: How do I adjust the cutting depth on the VS 315-PL?
- A: The cutting depth can be adjusted using the nubs provided on the machine. Turn the nubs to set the desired cutting depth before starting the cutting cycle.
- Q: What should I do in case of an emergency during operation?
- A: If an emergency occurs, immediately press the emergency stop button to halt all machine operations and ensure safety. Refer to the user manual for further instructions on handling emergencies.
VS 315-PL, 17/34 rpm ‘pneumatic’, incl. chip remover for tooth pitch T 6
- Article Number: 78041
- EAN Code: 9004853780417
TECHNICAL FACTS
- VS 315 PL
- A semi-automatic pneumatic system with quick-release and transmission head cylinder
- Angle stops at 45-0-45-60°
- Cutting range max. 135×80 mm
- Slow speed and high torque for INOX/NIRO/stainless steel and hard materials
PRODUCT HIGHLIGHTS
VS models
Modern, semi-automatic vertical circular saws with pneumatic or hydraulic quick-release vice, automatic feed and cutting pressure control. Semi- automatic cutting cycle with high throughput.
- Cutting depth adjustable with nubs
- Quick angle adjustment: swivel gear head with angle scale and locks
- Double-sided clamping – quick-action vice with anti-burr workpiece holder
- High performance: high-performance motor with two speed settings for hard/soft materials
- Smooth-running and durable: Quality gear unit with oil bath for permanent lubrication
- Feed can be optimised at any time: with infinitely adjustable cutting pressure control
- Optimal saw blade guide: Cooling system with electric pump, dosing valve and return filter
- Chip clearer for saw blade cleaning
- Highest repeatability: bar lock with adjustable material stop
- Safe: saw blade protection/guard, emergency stop, zero-voltage release, CE-compliant
Standard features
- VS metal circular saw
- H-Auto P pneumatics, semi-automatic
- Chip remover saw blade cleaning
- Material support with roller
- Bar lock with material stop
- GKS swivel gear head
- Angle scale and angle locks
- Vertical stroke/cutting depth adjustable
- SSS quick-action vice
- Anti-burr workpiece holder
- SSP quick-release pneumatic clamp
- High-performance drive/oil bath transmission
- Central operating panel
- Membrane panel with operating indicators
- SDS cutting pressure control
- Cooling system with electric pump
- Saw blade guard
- Emergency stop/zero voltage release
- Steel plate base and chip tray
- Tools/Operating instructions/CE
Semi-automatic cutting cycle
- Cycle start from operating panel
- Fix material/close clamp
- Saw blade drive on
- Lower gear head/cut
- Saw blade drive off
- Raise/reset gear head
- Release workpiece/open clamp
SPECIFICATIONS
| round tube cutting range at 0° | Max. 100 mm |
|---|---|
| round tube cutting range at 45° right winged mitre | Max. 100 mm |
| round tube cutting range at 60° right winged mitre | Max. 80 mm |
| square tube cutting range at 0° | Max. 90 mm |
| square tube cutting range at 45° right winged mitre | Max. 90 mm |
| square tube cutting range at 60° right winged mitre | Max. 70 mm |
| rectangle tube cutting range at 0° | Max. 135×80 mm |
| rectangle tube cutting range at 45° right winged mitre | Max. 100×80 mm |
| rectangle tube cutting range at 60° right winged mitre | Max. 70×80 mm |
| sawblade outside diameter | 315 mm |
| sawblade inside diameter | 32 mm |
| vise span max. | 160 mm |
| Cutting angle | 45-0-60 ° |
| speed level 1 / 2 | 17 / 34 rpm |
| engine power speed level 1 / 2 | 1320 / 1910 W |
| voltage | 400/50 V/Hz |
| infeed height for runways | 900 mm |
| Length | 1500 mm |
| Width | 650 mm |
| Height | 2000 mm |
| Weight | 300 kg |
- COMPRESSED AIR TECHNOLOGY
- WELDING TECHNOLOGY
- METALWORKING
- STONE CUTTING TECHNOLOGY
- WORKSHOP TECHNOLOGY
- POWER GENERATORS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>