ELMAG DM 315 ROHM Three Jaw Lathe Chuck Owner’s Manual
- June 1, 2024
- ELMAG
Table of Contents
DM 315 ROHM Three Jaw Lathe Chuck
Owner’s Manual
RÖHM THREE-JAW LATHE CHUCK
DM 315, DIN 6350
Steel body
Article Number: 88936
EAN Code: 9004853889363
DM 315 ROHM Three Jaw Lathe Chuck
TECHNICAL FACTS
-
Reliable, high-quality flat spiral chucks for universal use
-
Centrally clamping three and four-jaw chucks to DIN 6350 for high clamping forces and loads due to heavy workpieces, high speeds and high cutting performance
-
Very robust cast iron (ZG) or steel body (ZS), low profile
-
Round and axial runout according to DIN 6386
-
Very good repeatable clamping accuracy
-
For use on lathes, rotary tables, dividing heads, etc.
-
Through hole for bar machining
-
One set each of drilling and turning jaws, hardened and ground:
– 3 or 4 pcs. drilling jaws BB stepped outwards
– 3 or 4 pcs. DB turning jaws stepped inwards -
With clamping wrench and fastening screws
-
With cylindrical centering holder (size B, C)
PRODUCT HIGHLIGHTS
Lathe chuck handling
– Smooth-running, quick clamping without particular force
– Clamping jaws adjustable over the entire clamping range, reversible and
exchangeable
– Easy lubrication
Cast body versus steel body
– Cast body models ZG3 and ZG4: slightly cheaper, speed limit adjusted to
permissible peripheral speed for cast iron
– Steel body models ZS3 and ZS4: High load capacity, significantly more speed
SPECIFICATIONS
| inch | 12 1/2 |
|---|---|
| rotational speed max. | 2300 rpm |
| moment of torque at key | 180 Nm |
| total clamping force | 69 kN |
| outer voltage Ø size A1 BB | 6-135 mm |
| outer voltage Ø size A2 DB | 6-135 mm |
| outer voltage Ø size A3 DB | 96 – 225 mm |
| outer voltage Ø size A4 DB | 186 – 315 mm |
| inside voltage Ø size J1 | 96 – 224 mm |
| inside voltage Ø size J2 | 186 – 305 mm |
| Circulation diameter | 395 mm |
| rotating feed outer diameter | 315 mm |
| centre holding diameter | 260 mm |
| deep centre holding | 5 mm |
| Body height | 95 mm |
| passage drill diameter | 103 mm |
| hole circle diameter | 286 mm |
| centre flange thread | 3 x M16 |
| Jaw length | 130 mm |
| jaw high overstand | 46 mm |
| Wrench width | 14 mm |
| drive high | 30 mm |
| Weight | 44.2 kg |
COMPRESSED AIR TECHNOLOGY
WELDING TECHNOLOGY
METALWORKING STONE CUTTING
TECHNOLOGY WORKSHOP TECHNOLOGY
POWER GENERATORS
13.04.2024 – 3/3