ELMAG VS 350 P Metal Circular Saw User Guide
- June 1, 2024
- ELMAG
Table of Contents
ELMAG VS 350 P Metal Circular Saw
Specifications
- Product: Metal Circular Saw VS 350 P
- Speed: 36/72 rpm
- Power Source: Pneumatic
- Article Number: 78070
- EAN Code: 9004853780707
- Cutting Depth: Max. 120 mm
Product Information
The Metal Circular Saw VS 350 P is a modern, semi-automatic vertical circular saw designed for high throughput cutting operations. It features a pneumatic quick-release vice, automatic feed, and cutting pressure control for efficient cutting cycles. The saw is equipped with a high-performance motor with two speed settings suitable for both hard and soft materials.
Key Features:
- Adjustable cutting depth with nubs
- Quick angle adjustment with swivel gear head and angle scale
- Double-sided clamping with quick-action vice and anti-burr workpiece holder
- Quality gear unit with oil bath for smooth operation and durability
- Infinitely adjustable cutting pressure control for optimized feed
- Cooling system with electric pump, dosing valve, and return filter for optimal saw blade guide
- Bar lock with adjustable material stop for highest repeatability
- Safety features include saw blade protection/guard, emergency stop, and zero-voltage release
Product Usage Instructions
- Cycle start from the operating panel
- Fix the material and close the clamp
- Turn on the saw blade drive
- Lower the gear head to cut
- Turn off the saw blade drive after cutting
- Raise or reset the gear head
- Release the workpiece by opening the clamp
Frequently Asked Questions
- Q: What is the maximum cutting depth of the Metal Circular Saw VS 350 P?
- A: The maximum cutting depth of the saw is 120 mm.
- Q: Can the cutting pressure be adjusted during operation?
- A: Yes, the cutting pressure is infinitely adjustable for optimized feed at any time.
- Q: What are some safety features of the Metal Circular Saw?
- A: The saw is equipped with saw blade protection/guard, emergency stop, and zero-voltage release to ensure safe operation.
VS 350 P, 36/72 rpm ‘pneumatic
- Article Number: 78070
- EAN Code: 9004853780707
TECHNICAL FACTS
VS 350 P
- A semi-automatic pneumatic system with quick-release and transmission head cylinder
- Angle stops at 45-0-45-60°
- Cutting range max. 170×100 mm
- Material support with two rollers
PRODUCT HIGHLIGHTS
VS models
Modern, semi-automatic vertical circular saws with pneumatic or hydraulic quick-release vice, automatic feed and cutting pressure control. Semi- automatic cutting cycle with high throughput.
- Cutting depth adjustable with nubs
- Quick angle adjustment: swivel gear head with angle scale and locks
- Double-sided clamping – quick-action vice with anti-burr workpiece holder
- High performance: high-performance motor with two speed settings for hard/soft materials
- Smooth-running and durable: Quality gear unit with oil bath for permanent lubrication
- Feed can be optimised at any time: with infinitely adjustable cutting pressure control
- Optimal saw blade guide: Cooling system with electric pump, dosing valve and return filter
- Chip clearer for saw blade cleaning
- Highest repeatability: bar lock with adjustable material stop
- Safe: saw blade protection/guard, emergency stop, zero-voltage release, CE-compliant
Standard features
- VS metal circular saw
- H-Auto P pneumatics, semi-automatic
- Chip remover saw blade cleaning
- Material support with two rollers
- Bar lock with material stop
- GKS swivel gear head
- Angle scale and angle locks
- Vertical stroke/cutting depth adjustable
- SSS quick-action vice
- Anti-burr workpiece holder
- SSP quick-release pneumatic clamp
- High performance drive/oil bath transmission
- Central operating panel
- SDS cutting pressure control
- Cooling system with electric pump
- Fixed protective grille
- Emergency stop/zero voltage release
- Steel plate base and chip tray
- Tools/Operating instructions/CE
Semi-automatic cutting cycle
- Cycle start from operating panel
- Fix material/close clamp
- Saw blade drive on
- Lower gear head/cut
- Saw blade drive off
- Raise/reset gear head
- Release workpiece/open clamp
SPECIFICATIONS
| round tube cutting range at 0° | Max. 120 mm |
|---|---|
| round tube cutting range at 45° right winged mitre | Max. 120 mm |
| --- | --- |
| round tube cutting range at 60° right winged mitre | Max. 90 mm |
| square tube cutting range at 0° | Max. 100 mm |
| square tube cutting range at 45° right winged mitre | Max. 90 mm |
| square tube cutting range at 60° right winged mitre | Max. 90 mm |
| rectangle tube cutting range at 0° | Max. 170×90 mm |
| rectangle tube cutting range at 45° right winged mitre | Max. 125×90 mm |
| rectangle tube cutting range at 60° right winged mitre | Max. 90×90 mm |
| sawblade outside diameter | 350 mm |
| sawblade inside diameter | 32 mm |
| vise span max. | 185 mm |
| Cutting angle | 45-0-60 ° |
| speed level 1 / 2 | 36 / 72 rpm |
| engine power speed level 1 / 2 | 1900 / 2500 W |
| voltage | 400/50 V/Hz |
| infeed height for runways | 908 mm |
| Length | 2640 mm |
| Width | 1200 mm |
| Height | 1850 mm |
| Weight | 500 kg |
- COMPRESSED AIR TECHNOLOGY
- WELDING TECHNOLOGY
- METAL WORKING
- STONE CUTTING TECHNOLOGY
- WORKSHOP TECHNOLOGY
- POWER GENERATORS
Read User Manual Online (PDF format)
Loading......