ELMAG KBM 25 S V Belt Column Drill Owner’s Manual
- June 1, 2024
- ELMAG
Table of Contents
ELMAG KBM 25 S V Belt Column Drill
Specifications:
- Drilling capacity in steel:
- Mandrel holding fixture: Screw mandrel
- Speed range:
- Speed gradually quill stroke
- Column diameter
- T-slot width drill table lift
- Mandrel radius drill table revolving quill distance table min./max.
- Drilling table surface
- Motor power
- Voltage
- Cubature base plate surface
- Height (total): 1680 mm
- Weight: 125 kg
Product Usage Instructions
1. Integrated Thread Cutting Device:
The V-Belt Column Drill Model KBM 25 S I-Vario features an integrated thread cutting device that can be actuated by a microswitch. This allows for efficient thread cutting operations.
2. Drilling Depth Adjustment:
Adjust the drilling depth using the clamp scale provided with the machine. This ensures accurate and precise drilling operations based on your requirements.
3. LED Work Light:
Illuminate your work area with the LED work light for better visibility, especially in low-light conditions. This enhances safety and accuracy during drilling tasks.
4. Emergency Stop Button:
In case of any emergency or to halt the operation immediately, press the emergency stop button to stop the machine and prevent any potential hazards.
Frequently Asked Questions
- Q: What is the standard configuration of the V-Belt ColumnDrill Model KBM 25 S I-Vario?
- A: The standard configuration includes a keyless drill chuck B 16 (1 – 16 mm), taper mandrel MK 2 / B 16, drill drift, tool kit, and operating instructions / CE compliance.
- Q: How is the thread cutting device operated on this machine?
- A: The integrated thread cutting device can be operated manually or by setting a depth scale, which triggers spindle reversal after reaching a pre-set thread depth.
- Q: Does the machine come with a work light?
- A: Yes, the V-Belt Column Drill Model KBM 25 S I-Vario is equipped with an LED work light to enhance visibility during drilling operations.
Product Overview
TECHNICAL FACTS
- Integrated thread cutting device actuated by microswitch
- Drilling depth adjustment by means of a clamp scale
- LED work light
- Emergency stop button
PRODUCT HIGHLIGHTS
Super-Vario-Speed, the drive with more possibilities
The KBM I-Vario models are equipped with steplessly adjustable, powerful drive systems. They allow the cutting speed to be precisely matched to the material. This protects the tool, which is particularly important when drilling holes in heat-sensitive materials or when a high surface quality of the hole is required. Ideal machine for areas where the emphasis is on particularly clean and technically precise manufacturing: precision engineering, tool and prototype construction, plastics technology, acrylic glass processing, etc.
Highest quality with top value for money
The machines of the KBM I-Vario series are equipped with a Schneider frequency converter as standard, which permanently monitors the drive motor and ensures smooth running of the quill. The integrated thread cutting device can be operated manually or by means of a depth scale, which triggers the spindle reversal after a pre-set thread depth.
Standard configuration
- Keyless drill chuck B 16, 1 – 16 mm
- Taper mandrel MK 2 / B 16
- Drill drift
- Tool kit
- Operating instructions / CE
SPECIFICATIONS
| drilling capacity in steel | 25 mm |
|---|---|
| mandrel holding fixture (screw mandrel) | MK 2 |
| speed range | 10 – 2100 rpm |
| speed gradually | 2 |
| quill stroke | 100 mm |
| column diameter | 80 mm |
| t-slot width | 14 mm |
| drill table lift | 750 mm |
| mandrel radius | 200 mm |
| drill table revolving | ± 360 ° |
| quill distance table min./max. | 850 mm |
| drilling table surface | 320×320 mm |
| motor power | 750 W |
| voltage | 400/50 V/Hz |
| cubature | 195x195x360 mm |
| base plate surface | 600×385 mm |
| height (total) | 1680 mm |
| --- | --- |
| Weight | 125 kg |
- COMPRESSED AIR TECHNOLOGY
- WELDING TECHNOLOGY
- METALWORKING
- STONE CUTTING TECHNOLOGY
- WORKSHOP TECHNOLOGY
- POWER GENERATORS