ELMAG Profi-L MKS 315 Metal Circular Saw User Guide
- June 1, 2024
- ELMAG
Table of Contents
ELMAG Profi-L MKS 315 Metal Circular Saw
Product Information
Specifications
- Product: Metal Circular Saw MKS 315 PROFI-L
- Speed: 20/40 rpm
- Article Number: 78034
- EAN Code: 9004853780349
Product Highlights
- MKS PRO models are precision circular saws designed for cutting steel, non-ferrous metals, cast profiles, and plastics.
Features
- Compact design with coolant tank integrated into chip tray
- Stable cutting guide with ERGO operating lever, continuous safety switch, and automatic reset
- Multiple safety features including self-closing protection, continuous switch, emergency stop, no-voltage release, and CE compliance
Application Examples
- Metal construction
- Mechanical engineering
- Machine construction
- Metalworking shops
- Forging
- Pipe construction
- Boiler construction
- Tank construction
- Fitters
- Plumbers
- Garages
- Vehicle body construction
- Construction industry
Product Usage Instructions
Setup
- Place the metal circular saw on a stable, level surface.
- Ensure the coolant tank is filled with the appropriate coolant solution.
- Check that all safety features are functioning properly before operation.
Cutting Process
- Secure the material to be cut in place using clamps or a material stand.
- Adjust the cutting guide and speed settings according to the material being cut.
- Activate the saw using the operating lever and ensure proper alignment before cutting.
Maintenance
- Clean the saw blade and chip tray regularly to prevent buildup.
- Inspect and replace any worn-out parts as needed to maintain optimal performance.
- Store the saw in a dry and dust-free environment when not in use.
Safety Precautions
- Always wear appropriate safety gear such as goggles and gloves when operating the metal circular saw.
- Avoid wearing loose clothing that could get caught in the saw blade.
FAQ
- Q: Can this saw cut through stainless steel?
- A: Yes, this metal circular saw is designed to cut through steel, including stainless steel.
- Q: How often should I change the coolant in the tank?
- A: It is recommended to change the coolant at least once every three months or more frequently based on usage and condition.
- Q: What is the voltage requirement for this saw?
- A: The metal circular saw operates on standard mains voltage (check the product label for specific details).
METAL CIRCULAR SAW MKS 315 PROFI-L
- 20/40 rpm
- Article Number: 78034
- EAN Code: 9004853780349
TECHNICAL FACTS
PRODUCT HIGHLIGHTS
MKS PRO models
Precision circular saws for steel, non-ferrous metals, cast profiles and
plastics.
- Adjustable material support with roller
- Almost burr-free cutting, precise gear head and saw blade positioning
- Highest repeatability, bar lock with adjustable material stop
- Quick angle adjustment with a lever handle (quick angle clamp and angle scale)
- Flexible mitre adjustment, gear head and/or vice can be swivelled 45-0-45°.
- Cutting depth can be precisely limited by adjusting the screw
- Powerful, double-sided clamping with just one lever turn, quick-clamping vice with clamping lever and anti-burr workpiece holder
- Powerful: two-stage drive unit for hard and soft materials
- Smooth-running and durable: high-performance gearbox with oil bath for continuous lubrication
- Optimal sawblade cooling: coolant circulation system with diaphragm pump, metering valve and return filter
- Compact: coolant tank integrated into the chip tray
- Stable cutting guide: ERGO operating lever with continuous safety switch and automatic reset
- Safe: self-closing protection, continuous switch, emergency stop, no-voltage release, CE-compliant
Standard features
- MKS Profi metal circular saw
- Material support with roller
- Bar lock with material stop
- WSS angular quick-release clamp/angle scale
- Adjustable cutting depth stop
- SSS quick-release clamping vice
- Quick clamping lever
- Adjustable clamping jaw
- Anti-jaw workpiece holder
- High-performance drive
- Gear unit with oil bath permanent lubrication
- Cooling system with electric pump
- ERGO control lever with reset
- Permanent safety switch on handle
- Self-locking safety guard
- Emergency stop/ zero voltage release
- Tools/Operating instructions/CE
Special accessories
- Sheet steel base
- Material stands for metal circular saws
Application examples
- Metal construction
- Mechanical engineering
- Machine construction
- Metalworking shops
- Forging
- Pipe construction
- Boiler construction
- Tank construction
- Fitters
- Plumbers
- Garages
- Vehicle body construction
- Construction industry
SPECIFICATIONS
round tube cutting range at 0°| Max. 100 mm
round tube cutting range at 45° right winged mitre| Max. 90 mm
square tube cutting range at 0°| Max. 90 mm
square tube cutting range at 45° right winged mitre| Max. 80 mm
rectangle tube cutting range at 0°| Max. 140×70 mm
rectangle tube cutting range at 45° right winged mitre| Max. 70×85 mm
sawblade outside diameter| 315 mm
sawblade inside diameter| 32 mm
vise span max.| 190 mm
Cutting angle| 45-0-45 °
speed level 1 / 2| 20 / 40 rpm
engine power speed level 1 / 2| 1320 / 1910 W
voltage| 400/50 V/Hz
infeed height for runways| 1030 mm
Length| 1475 mm
Width| 1000 mm
Height| 1150 mm
Weight| 170 kg
Read User Manual Online (PDF format)
Loading......