MONSTER XKT26 True Wireless Bluetooth Headphone Instruction Manual
- June 1, 2024
- Monster
Table of Contents
MONSTER XKT26 True Wireless Bluetooth Headphone
Product Parameters
- Bluetooth version V5.4
- Transmission distance ≥10m
- Driver diameter Φ 13mm
- Driver impedance 32 Ω 2÷15%
- sensitivity 104÷3dB
- Frequency response 20Hz-20KHz
- Battery capacity(Charging case) 300mAh 3.7V
- Battery capacity(Headphone) 40mAh 3.7V
- Charging time(Charging case) ≈ 2 hours
- Music playtime(Headphone) ≈ 26 hours
- Music playtime with charging case ≈ 24 hours
Product Schematic Description
Charge the charging case
- Connect the charging case to the 5V power adapter with a Type-C charging cable.
- Rated input: 5V 40mA(Headphone)
- Rated input: 5V 300mA(Charging case)
TIPS: When the cover of the charging box is closed, the indicator light of the charging box flashes ice-blue, please charge the charging box.
(Indicator guide)
Product operating instructions
- Power on
- Method 1： Open the top cover of the charging case, and the headset will turn on automatically;
- Method 2： Long press the MFB button of the left/right headset for about 3 seconds to power on the headset.
- Power off
- Method 1： Put the earphone back in the charging case, close the cover of the charging case, and the earphone will automatically shut down;
- Method 2： The device automatically shuts down after 3 minutes of disconnection from the Bluetooth device.
- Pairing
- Step one: Open the top cover of the charging case, and the headset will turn on automatically;
- Step two: Open the Bluetooth list of smart devices, search for “Monster Airmars XKT26” to pair, and the connection is successful After that, you will hear the “Connected” tone
Headphones will try reconnecting to the device within 3 minutes when the connection is lost.
NOTE:
- Fully charge the headphones and power off before an intended not-in-use period.
- Unplug the charging cable after charging.
Operation
-
Normal
-
Music playback
-
Phone
-
Music/Game/Transparent/ANC switch: Connected device
Restore factory settings
- When you turn on the headphones, make sure it does not connect to any Bluetooth device, and click the MF button 5 times to clear the pairing record, then turn off the headphones.
Precautions
- Take out the earphone from the charging box, without pressing any button, the earphone will automatically turn on, connect or pair, put the earphone into the charging box, and the charging box will automatically Charge your headphones. Turn them off.
- Often clean, long life, if not used for a long time, it is recommended to charge once every 15 days to extend battery life, and the charging part of the headset is often used with cotton swabs and an Alcohol wipe, which can help smooth charging, avoid bad contact, affect the use experience.
- The battery [battery pack or battery combination] shall not be exposed to lighting, baking or similar overheating environment; Do not disassemble, knock, squeeze or throw., if there is serious swelling, do not continue to use; Do not place in a high-temperature environment; Do not use after soaking water.
- Because this product adopts wireless connection mode, it is affected by the environment, mobile phone brand, usage behaviour and other factors in daily use. It may be normal to have a brief, slight sound delay during the playing of music.
Warnings
- Do not use headphones at high volume for an extended period.
- Keep the headphones away from dust and water.
- Do not disassemble the headphones and accessories, otherwise, the warranty will be voided.
- Keep headphones away from any impact or vibration.
- Do not use any chemical solvents or cleaning agents on the headphones.
This table is compiled according to SJ/T 11364
- O: Indicates that this hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in GB/T 26572.
- X: Indicates that this hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in GB/T 26572.
FCC
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver isconnected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference。
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
FCCID: 2A8PV-QSMXKT26
Environment-Friendly Use Period (EFUP)
- This logo refers to the period (10 years) during which the hazardous substances in electronic and electrical products will not leak or mutate so that the use of these [substances] will not result in any severe environmental pollution, any bodily injury or damage to any assets.
Warranty Service
Dear user, this warranty card is the proof of your future warranty application, please cooperate with the seller to fill it out and keep it for future use
