MONSTER SMART ILLUMINESSENCE MLB7-1078 Smart Indoor and Outdoor Rgb Plus With LED Light Strip User Guide

MONSTER SMART ILLUMINESSENCE MLB7-1078 Smart Indoor and Outdoor Rgb Plus

With LED Light Strip

Product Information

Specifications:

• Product Name: Smart Indoor/Outdoor RGB+W LED Light Strip
• Model Numbers: MLB7-1078 / 1079 / 2022 – v1.0 0222
• Brand: Monster Smart Illuminessence

Product Usage Instructions

Getting Started:
Thank you for choosing the Smart Indoor/Outdoor LED Light Strip. This guide will help you with setup and installation.

What’s in the Box:

• Mounting clips and screws
• Indoor/Outdoor LED Light Strip
• Power adapter
• Multifunction button
• Water-tight cap, locking connection
• Controller

Setup Complete Setup Before Installation:
Remove all components from the box. Uncoil the light strip to prevent overheating.

Setup Steps:

1. Download the app from the App Store (iPhone) or Google Play Store (Android).
2. Connect your phone or tablet to the 2.4GHz Wi-Fi network.
3. Create an account in the app.
4. Connect the power adapter to a wall outlet.
5. Pair the device by pressing and holding the multifunction button.

Note:
You can operate the device with the controller without pairing to Wi-Fi and without the app, but advanced features will not be available.

Frequently Asked Questions (FAQ):

1. Q: Can I use the LED light strip without connecting to Wi-Fi?
   A: Yes, you can operate the device with the controller without pairing to Wi-Fi, but advanced features like color customization and scheduling will not be available.

2. Q: What should I do if I have trouble connecting to my 2.4GHz Wi-Fi network?
   A: If you have difficulty connecting to a 2.4GHz network, contact your Internet Service Provider for assistance with network setup or try using AP pairing mode.

GETTING STARTED
Thank you for choosing the Smart Indoor/Outdoor LED Light Strip by Monster Smart Illuminessence. This Quick Start Guide will help you with setup and installation of your device.

WHAT’S IN THE BOX

• Smart Indoor/Outdoor LED Light Strip with controller
• Mounting Clips + Screws
• Power Adapter (24V 1A, 6ft/1.8m cord)
• Quick Start Guide

WHAT DO YOU NEED?

• Cellphone or tablet with Android™ 6.0 Marshmallow or higher / iOS 10 or higher
• Wi-Fi router with an internet connection
• Wi-Fi 2.4GHz 802.11n
• Phillips head screwdriver

Before setup, make sure your phone or tablet is connected to the 2.4GHz Wi-Fi network that your LED Strip will be placed on. For easier pairing, turn on Location and Bluetooth to quickly find nearby devices.
TIP: Do you know your Wi-Fi network name and password? Write it down now if it’s hard to remember.

ANYTHING ELSE?
The power adapter must be connected to a GFCI protected hooded flush type cover plate receptacle marked “Wet Location” while in use outdoors.
TIP: Save these instructions for future reference.

SETUP COMPLETE SETUP BEFORE INSTALLATION

Remove your LED Strip and all components from the box. To prevent overheating, uncoil the light strip before use.

It is recommended to first pair your device in a location close to your router BEFORE installation.
NOTE: If desired, you can operate the device with the controller and without pairing to Wi-Fi and without the app. Advanced features like color customization, scheduling, and voice control will not be available. (See “How To Use” on page 8)

STEP 1
Download the app from the App Store  (for iPhone) or Google Play Store (for Android phones).

STEP 2
Make sure your phone or tablet is successfully connected to the 2.4GHz Wi-Fi network that your device will be placed on and ensure that your Bluetooth is enabled.
Open the app and create an account by following the on-screen instructions.

NOTE
Most Smart devices only work on a 2.4GHz Wi-Fi network.
Many newer home Wi-Fi networks are mixed networks that are set to 5GHz by default (ex: AT&T, Verizon) and you may need to use AP pairing mode to connect. If you still have difficulty, contact your Internet Service Provider for assistance with 2.4GHz network setup.

STEP 3
Connect the power adapter to a powered wall outlet, the light should turn on. If needed press the multifunction button twice to turn on the light.
Press and hold the multifunction button for 5-6 seconds to enter pairing mode. The light will begin blinking when it has entered pairing mode and is ready to pair.

STEP 4
Confirm that the device is in pairing mode, LED is RAPIDLY blinking.
In the app, select the “+” in the upper right corner of the home screen to add a new device.

The app will detect the nearby Wi-Fi+BLE enabled device and ask if you would like to add it, click “Go to add”.
Ensure that the device is checked and then click the “+” button.

STEP 5
Confirm that the network displayed is your 2.4GHz Wi-Fi network, then enter your Wi-Fi password and click “Confirm”.

Once complete, your device will be connected to the network. Confirm or change the settings for your device and then click “Done”. Your device is now setup and ready to use!

You can now use the app to add voice control (see pg 10), adjust settings, create custom lighting effects, set schedules, and more!

INSTALLATION

This Light Strip’s water-resistant housing makes it perfect for edge-lighting large outdoor spaces like decks, patios, and walkways, or for illuminating large indoor spaces.

STEP 1
Determine where you will install the Light Strip. Make sure the location is still within the range of your Wi-Fi network and that it is close enough to a power source for the cord to reach without becoming a tripping hazard.

STEP 2
Using the included mounting clips and screws, mount the Light Strip in the desired location. For best results place one clip approximately every 20”/50cm to secure the entire light strip evenly.

TIP: Place more mounting clips closer to curves or corners to better secure the strip around turns and use fewer on straight areas.

NOTE
To avoid damage, do not tightly fold or bend the Light Strip. While the housing of the Light Strip is flexible, extremely sharp bends may cause damage to the components inside. Make curves rather than corners.

STEP 3
Once installed, connect the power adapter to the port on the cable and screw on the water-tight locking cap until secure.

Connect the other end of the adapter to a powered wall outlet (outdoors this must be a GFCI protected, hooded outlet.) The Light Strip will automatically reconnect to the paired Wi-Fi network once powered on and will now be ready to use!

WATER-RESISTANCE
The Light Strip is IP65 water-resistant and is suitable for both indoor and outdoor use. The power adapter is NOT water-resistant. To ensure maximum water protection:

• Ensure that the power adapter connection is tightly sealed.
• The power adapter must be connected to a GFCI protected hooded flush type cover plate receptacle marked “Wet Location” while in use outdoors.
• Do not submerge the strip, controller, or adapter in water.
• Do not cut, puncture, or otherwise damage the strip.

HOW TO USE

Your Light Strip can be easily controlled by the controller, using the app to access advanced and customizable lighting effects, or by using a compatible voice assistant product (see page 10).

BUTTON CONTROL

GROUPING DEVICES
Your Light Strip is great to use in multiples, you can control each separately or easily group multiple lights together in the app to control them all as one. Click on the settings button in the upper right corner and then click “Create Group” to group your devices.

NOTE: Grouping different Monster Smart Illuminessence devices with different features may cause communication issues when selecting Scenes. For best results create groups of the same products. If you would like to group together different items, it is recommended to control using the Color settings only, rather than Scenes.

APP CONTROL: EDIT SCENES
The app gives you full control over all the functions of the Light Strip, as well as the ability to edit preset scenes to create your own custom scenes. Below are some of the editable scene features for this device:

VOICE CONTROL OPTIONAL

AMAZON VOICE CONTROL SETUP
Make sure your Amazon Alexa device is installed and setup

• STEP 1 : Open the Alexa app and go to Skills in the menu
• STEP 2 : Search for and choose
• STEP 3 : Enable the Skill and authorize your account using your login information

NOTE : Use the same login information that you used to create your Monster Smart account

At any time, go to the Alexa app to set nicknames and rooms for your devices. You can also rename devices in the Monster Smart app.
Using the name Light Strip, or the name you assigned your device, you can ask Alexa to control your device, just say “Alexa,” and ask: “Turn on my Light Strip”, “Set my Light Strip to blue”, “Set my Light Strip to 50% brightness”, and more!

GOOGLE VOICE CONTROL SETUP

Make sure your Google Assistant device is installed and setup.

• STEP 1 : Open the Google Home app, go to the Home menu, and tap the “+” button
• STEP 2 : Click “Set up device”
• STEP 3 : Click “Have something already set up?”
• STEP 4 : Search for and choose and authorize your account using your login information

NOTE : Use the same login information that you used to create your Monster Smart account

At any time, go to the Google Home app to set nicknames and rooms for your devices. You can also rename devices in the Monster Smart app.
Using the name Light Strip, or the name you assigned your device, you can ask your Google Assistant to control your device, just say “Hey Google” and say: “Turn on my Light Strip”, “Set my Light Strip to blue”, “Set my Light Strip to 50% brightness”, and more!

SIRI VOICE CONTROL SETUP

Requires iPhone running iOS 12 or later.

• STEP 1 : Open the app and go to the “Smart” menu, tap the “+” button to create a new Tap to Run Smart Scene
• STEP 2 : Tap “launch Tap To Run” and fill out the information
• STEP 3 : Once your Smart Scene is created and saved, click the button that appears at the bottom of the screen that says “Add to Siri” to open the list of options
• STEP 4 : Select your new Tap To Run Smart Scene from the list and click “Add to Siri”
• STEP 5 : Create a custom phrase to say to Siri to run your Smart Scene (this can be any verbal command)

Now Siri can use your voice and custom verbal command to turn your Light Strip on or off, activate your favorite lighting pattern, adjust the device at the same time as your other smart devices, or whatever you’ve set up as your Tap To Run Smart Scene.

NOTES
WARRANTY
1 Year Limited Warranty – Please read and understand all instructions before using this product. If damage is caused by failure to follow the instructions, this warranty is null and void.

SAFETY

WARNING: When using outdoor use products, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following:

• Keep these instructions
• Uncoil the light strip before use
• Do not drop, puncture, or disassemble this product
• Do not use this product in any way other than what is outlined in this guide
• Do not submerge the strip or the power supply unit in water
• The power adapter must be connected to a GFCI protected hooded flush type cover plate receptacle marked “Wet Location” while in use outdoors
• Avoid long exposure to direct sunlight, which may cause damage
• Do not use this product in small, enclosed locations that could limit the flow of air or trap excess heat
• Do not expose this product to open flames or use near fire
• Do not use the product in a strong magnetic field
• Do not use this product for emergency lighting/exits
• Do not allow small children to operate or install this device unsupervised
• Use a clean, soft cloth to clean – do not use any corrosive cleaners/oils

Light Strip | Model: MLB7- 1078, 1079, 2022 -RGB | Input: 24V DC 1A
The illustrated products and specifications may differ slightly from those supplied.
The M Monster logo and IlluminEssence are trademarks or registered trademarks of Monster, Inc. or its subsidiaries in the U.S. and other countries and are used under license. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App store is a service mark of Apple Inc. Google, Android and Google Play are trademarks of Google LLC. Pre- set-up required. Amazon, Alexa, and all related logos are trademarks of Amazon.com, Inc. or its affiliates. All other brand names are trademarks of their respective owners. Neither Jem Accessories, Inc. nor Monster, Inc. is affiliated with the respective owners of their trademarks. Licensed and Manufactured by Jem Accessories, Inc. South Plainfield, NJ 07080. Made in China.

FCC Compliance

This device complies with Part 15 of the FCC. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party
   responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Statement
To satisfy FCC’s RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended.

ISEDC Warning
1 YEAR LIMITED WARRANTY
Jem Accessories, Inc. Limited Warranty Policy for Monster Smart Products Last Updated: March 27, 2020
This limited warranty contains important information about your rights and obligations, as well as limitations and exclusions that may apply to you.

1. WHAT THIS LIMITED WARRANTY COVERS; PERIOD OF COVERAGE Jem Accessories, Inc. (“Jem Accessories”), 32 Brunswick Ave, Edison, New Jersey, USA, warrants to the owner of the enclosed Monster Smart-branded product contained in this box (“Product”) will be free from defects in materials and workmanship for a period of one year. Notwithstanding the foregoing, the Warranty Period for a factory refurbished Product is one (1) year, even if installed by a professional. If the Product fails to conform to this Limited Warranty during the Warranty Period, Jem Accessories will, at its sole discretion, either (a) repair or replace any defective Product or component; with proof of purchase using original documentation. Repair or replacement may be made with a new or refurbished product or components, at Jem Accessories’s sole discretion. If the Product or a component incorporated within it is no longer available, Jem Accessories may, at Jem Accessories’s sole discretion, replace the Product with a similar product of similar function. This is your sole and exclusive remedy for breach of this Limited Warranty. Any Product that has either been repaired or replaced under this Limited Warranty will be covered by the terms of this Limited Warranty for the longer of (a) ninety (90) days from the date of delivery of the repaired Product or replacement Product, or (b) the remaining Warranty Period. This Limited Warranty is not transferable from the original purchaser to subsequent owners.
2. TOTAL SATISFACTION RETURN POLICY If you are the original purchaser of the Product and you are not satisfied with this Product for any reason, you may return it in its original condition to the retailer in compliance with the retailer’s return policy.
3. WARRANTY CONDITIONS; HOW TO GET SERVICE IF YOU WANT TO CLAIM UNDER THIS LIMITED WARRANTY Before making a claim under this Limited Warranty, the owner of the Product must (a) visit monsterilluminessence.com/support during the Warranty Period to provide notice of your warranty claim and describe the alleged failure, and (b) comply with Jem Accessories (or its authorized distributor’s) return shipping instructions. Jem Accessories will have no warranty obligations with respect to a returned Product if it determines, at its reasonable discretion after examination of the returned Product, that the Product is an Ineligible Product (defined below).
4. WHAT THIS LIMITED WARRANTY DOES NOT COVER This Limited Warranty does not cover the following (collectively “Ineligible Products”):
5. Products marked as “sample” or “Not for Sale”, or sold “AS IS”;
6. Products that have been subject to:

  * modifications, alterations, tampering, or improper maintenance or repairs;
  * handling, storage, installation, testing, or use not in accordance with any quick start guide, manual or other instructions provided by Jem Accessories;
  * abuse or misuse of the Product;
  * breakdowns, fluctuations, or interruptions in electric power or the telecommunications network; or
  * Acts of God, including but not limited to lightning, flood, tornado, earthquake, or hurricane; or
3. any non-Jem Accessories branded hardware products, even if packaged or sold with Jem Accessories hardware. This Limited Warranty does not cover consumable parts, including batteries, unless damage is due to defects in materials or workmanship of the Product, or software (even if packaged or sold with the product). Jem Accessories recommends that you use only authorized service providers for maintenance or repair. Unauthorized use of the Product or software can impair the Product’s performance and may invalidate this Limited Warranty.

5. DISCLAIMER OF WARRANTIES Except as stated above in this limited warranty, and to the maximum extent permitted by applicable law, Jem Accessories disclaims all express, implied, and statutory warranties and conditions with respect to the product, including the implied warranties of merchantability and fitness for a particular purpose. To the maximum extent permitted by applicable law, Jem Accessories also limits the duration of any applicable implied warranties or conditions to the duration of this limited warranty.
6. LIMITATION OF DAMAGES In addition to the above warranty disclaimers, in no event will Jem Accessories be liable for any consequential, incidental, exemplary, or special damages, including any damages for lost data or lost profits, arising from or relating to this limited warranty or the product, and Jem Accessories’s total cumulative liability arising from or related to this limited warranty or the product will not exceed the amount actually paid for the product by the original purchaser.
7. LIMITATION OF LIABILITY The Jem Accessories online services at monsterilluminessence.com (“services”) provide you information (“product information”) regarding your Jem Accessories products or other peripherals connected to your products (“product peripherals”). The type of product peripherals that may be connected to your product may change from time to time. Without limiting the generality of the disclaimers above, all product information is provided for your convenience, “as is”, and “as available”. Jem Accessories does not represent, warrant, or guarantee that product information will be available, accurate, or reliable or that product information or use of the services or product will provide safety in your home. You use all product information, the services, and the product at your own discretion and risk. You will be solely responsible for (and Jem Accessories disclaims) any and all loss, liability, or damages, including to your wiring, fixtures, electricity, home, product, product peripherals, computer, mobile device, and all other items and pets in your home, resulting from your use of the product information, services, or product. Product information provided by the services is not intended as a substitute for direct means of obtaining the information. For example, a notification provided through the service is not intended as a substitute for audible and visible indications in the home and on the product, nor for a third party monitoring service that monitors alarm state.
8. YOUR RIGHTS AND THIS LIMITED WARRANTY This Limited Warranty gives you specific legal rights. You may also have other legal rights that vary by state, province, or jurisdiction. Likewise, some of the limitations in this Limited Warranty may not apply in certain states, provinces or jurisdictions. The terms of this Limited Warranty will apply to the extent permitted by applicable law. For a full description of your legal rights you should refer to the laws applicable in your jurisdiction and you may wish to contact a relevant consumer advisory service.

If you need to start a warranty claim for your Monster Smart device, please reach out to Customer Support by emailing customerservice@monsterilluminessence.com or calling our support number 866-246-2008.
Please allow 7-10 business days to process warranty claims. Customers located outside of U.S. will be responsible for all shipping costs.

TROUBLESHOOTING

HAVING TROUBLE WITH SETUP?
Don’t return this product to the retailer, we’re here to help. Please call/write us for customer support: 866-246-2008 customerservice@monsterilluminessence.com

Q: Why is my device failing to connect to my Wi-Fi network?
A1: Make sure your phone or tablet is successfully connected to the 2.4GHz Wi-Fi network that your device will be placed on.
A2: Make sure you enable Bluetooth and allow location services on your phone or tablet to find nearby devices.
A3: If your Wi-Fi network is a mixed 2.4GHz/5GHz network, try using AP pairing mode for better results.

1. Press and hold the pairing button until the LED is slowly blinking.
2. In the app, select the “+” in the upper right corner of the home screen to add a new device and then select “Lighting (Wi-Fi)”.
3. Click “Net Pairing Mode” in the upper right to switch to AP mode.
4. Confirm that the LED indicator is slowly blinking, confirm the network is your mixed Wi-Fi network, enter your Wi-Fi password, and click “Confirm”.
5. Follow on-screen instructions to set up your device via wireless access point.

A4: If you still have issues with your mixed network, you may need to access your router settings and/or call your Internet Service Provider to create a separate 2.4GHz network.

Q: Can I cut this LED Light Strip?
A1: Yes. If desired, you can cut the light strip to shorter lengths. However, once cut, the strip will no longer be water resistant or covered under the Monster warranty.
Be sure to remove the end cap and replace it on the new end of your light strip using waterproof glue.

Q: Can I attach additional LED Light Strips to this one?
A1: Due to the water-resistant design, this strip is not equipped with an expansion plug. Please group your devices in the app. For instructions on how to group devices, please see page 8.
For other frequently asked questions please visit our website at www.monsterilluminessence.com

References

• . Spend less. Smile more.
• HOME - Monster Illuminessence
• SUPPORT - Monster Illuminessence
• HOME - Monster Illuminessence

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>