MONSTER XKT29 True Wireless Bluetooth Headphone Instruction Manual

MONSTER XKT29 True Wireless Bluetooth Headphone

Specifications

• Model: Monster Airmars XKT29
• Bluetooth Version: V5.4
• Components: 2 Headphones, 1 Charging case, 1 Instructions Manual, 1 Type-C Charging cable
• Rated Input:
  • Headphone: 5V 30mA
  • Charging case: 5V 300mA

Product Usage Instructions

Power On

Method 1: Open the top cover of the charging case, and the headset will turn on automatically.

Method 2: Long press the Multi-function button (MFB) of the left/right headset for about 3 seconds to power on the headset.

Power Off

Method 1: Put the earphone back in the charging case, close the cover of the charging case, and the earphone will automatically shut down.

Method 2: The device automatically shuts down after 3 minutes of disconnection from the Bluetooth device.

Pairing

Step 1: Open the top cover of the charging case, and the headset will turn on automatically.

Step 2: Open the Bluetooth list of smart devices, search for Monster Airmars XKT29 to pair, and upon successful connection, you will hear the Connected tone.

Settings

• Voice Assistant: Press and hold the left Multi-function button for 2 seconds.
• Volume +: Click the right Multi-function button.
• Volume -: Click the left Multi-function button.

Music Playback Controls:

• Pause/Play: Double click Left/Right MFB
• Last song: Triple click left MFB
• Next song: Triple click right MFB

Phone Controls:

• Answer: Double click the left/right MFB
• Reject: Long press left/right MFB for 2 seconds
• Hang up: Double click the left/right MFB

Game Mode/Music Mode Switching:

Note: Device must be connected for mode switching.

• Game mode: Press and hold the right earphone MFB for 2 seconds to enter Game mode.
• Music mode: Press and hold the right earphone MFB for 2 seconds to enter Music mode.

Frequently Asked Questions

Q: How do I know if the charging case is fully charged?

A: The red light of the charging case will be bright when it is fully charged.

Q: How can I switch between Game mode and Music mode?

A: To switch to Game mode, press and hold the right earphone Multi- function button for 2 seconds. To switch to Music mode, repeat the same step.

Monster Airmars XKT29
True wireless Bluetooth headphone instruction manual

Product parameters

• Bluetooth version: V5.4
• Transmission distance: ≥10m
• Driver diameter: Φ12mm
• Driver impedance: 16 Ω±15%
• sensitivity: 118±3dB
• Frequency response: 20Hz-20KHz
• Battery capacity(Charging case): 300mAh 3.7V
• Battery capacity(Headphone): 300mAh 3.7V
• Charging time(Charging case): ≈2 hours
• Music playtime(Headphone): ≈4 hours
• Music playtime with charging case: ≈20 hours

Product Schematic Description

Charge the charging case
Connect the charging case to the 5V power adapter with Type-C charging cable.

TIPS: When the cover of the charging box is closed, the indicator light of the charging box flashes ice-blue, please charge the charging box.

Indicator Guide

Product operating instructions

1. Power on
   Method 1：Open the top cover of the charging case, and the headset will turn on automatically;
   Method 2：Long press the MFB button of the left/right headset for about 3 seconds to power on the headset.

2. Power off
   Method 1：Put the earphone back in the charging case, close the cover of the charging case, and the earphone will automatically shut down;
   Method 2：The device automatically shuts down after 3 minutes of disconnection from the Bluetooth device.

3. Pairing
   Step one: Open the top cover of the charging case, and the headset will turn on automatically;
   Step two: Open the Bluetooth list of smart devices, search for
   “Monster Airmars XKT29” to pair, and the connection is successful After that, you will hear the “Connected” tone
   Headphones will try reconnecting to the device within 3 minutes when connection is lost.

NOTE

• Fully charge the headphones and power off before an intended not-in-use period.
• Unplug the charging cable after charging.

Operation

Normal

Restore factory settings

When you turn on the headphone, make sure it does not connect to any Bluetooth device, and click the MF button 5 times to clear the pairing record, then turn off the headphone.

Precautions

1. Take out the earphone from the charging box, without pressing any button, the earphone will automatically turn on, connect or pair, put the earphone into the charging box, and the charging box will automatically Charge your headphones. Turn them off.

2. Often clean, long life, if not used for a long time, it is recommended to charge once every 15 days to extend battery life, and the charging part of the headset is often used with cotton swabs Alcohol wipe, can help smooth charging, avoid bad contact, affect the use experience.

3. The battery [battery pack or battery combination] shall not be exposed to lighting, baking or similar overheating environment; Do not disassemble, knock, squeeze or throw.In the fire,
   if there is serious swelling, do not continue to use; Do not place in high- temperature environment; Do not use after soaking water.

4. Because this product adopts wireless connection mode, it is affected by environment, mobile phone brand, usage behavior and other factors in daily use.It may be normal to have a brief, slight sound delay during the playing of music

Warnings

1. Do not use headphones at high volume for an extended perios of time.
2. Keep the headphones away from dust and water.
3. Do not disassemble the headphones and accessories, otherwise warranty will be voided.
4. Keep headphones away from any impact or vibration.
5. Do not use any chemical solvents or cleaning agent on the headphones.

This table is compliled according to SJ/T 11364

• Indicates that this hazardous substance contained in all of the homogeneous materials for
  this part is below the limit requirement in GB/T 26572.
  Indicates that this hazardous subatance contained in at least one of the homogeneous materials used for this part is above the limit requirement in GB/T 26572.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference。
2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCCID：2A8PV-QSMXKT29

Environment Friendly Use Period (EFUP)

This logo refers to the period (10 years) during which the hazardous substances in electronic and electrical produsts will not leak or mutate so that the use of these [substances] will not result in any severe environmental pollution, any bodily injury or damage to any assets.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Warranty Service

Dear user, this warranty card is the proof of your future warranty application, please cooperate with the seller to fill it out and keep it for future use!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>