MONSTER Airmars M5 Wireless Mouse User Manual

May 15, 2024
Monster

MONSTER logo

Monster Airmars M5
**WIRELESS MOUSE

**

product parameter

  • Number of buttons………..4
  • Mouse battery…………… AA battery (PRC)
  • DPI………………. 1000/1200/1600
  • Transmission distance………10M
  • Mode ……………..2.4G
  • Button life…………… 3 million times

packing List

MONSTER Airmars M5 Wireless Mouse - part list

kindly reminder

  1. Do not attempt to disassemble or replace any parts of the product except for those operations specifically indicated in the instruction manual.
  2. Do not put the product into water or any other liquid, this product is not waterproof design.
  3. If any liquid accidentally enters the product, please disconnect and remove the product immediately.
  4. To avoid electric shock, please make sure there is no water on your hands when installing or uninstalling the product.
  5. Do not place this product near a heat source or expose it directly to a fire source.
  6. Do not place this product in an environment with strong electromagnetic force, as this may cause the product to malfunction.

product introduction

product size

  • Product Size 102°65*36mmMONSTER Airmars M5 Wireless Mouse - icon

system support

The mouse supports pairing with computers with Windows OS 8 and above, Mac OS 10.10 and above and Google Chrome OS installed.

USB Receiver with battery installation

  • Open the USB battery compartment along the top slit, install a #5 dry cell battery and insert it into the battery hole location, then remove the USB receiver and plug the receiver into a computer USB port.

| |
---|---|---
1. Find the cracks| 2. Open the bin lid| 3. Remove the USB receiver and install the mouse battery.
| |
 4.Plug the USB receiver into the computer| 5. Put the lid back on| 6. Turn on the power switch into the computer at the bottom of the mouse
Name of the Parts| Hazardous Substances
---|---
Pb| Hg| Cd| Cr(VI)| PBB| PBDE
Housing| | | | | |
PCBA| | | | | |
Accessories| | | | | |

This table is compiled according to SJ/T 11364.

O: Indicates that this hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in GB/T 26572
X : Indicates that this hazardous subatance contained in at least one of the homogeneous materials used for this part is the limit requirement in GB/T 26572.
Environment Friendly Use Period (EFUP)
This logo refers to the period (10 years) during which the hazardous substances in electronic and electrical produsts wil not Leaker mutate so that the use of these [substances] will not result in any severe environmental pollution, any bodily injury or damage to any assets.

Warranty Card

Dear user, this warranty card is your certificate for applying for warranty in the future, please cooperate with the seller to fill it out and keep it in a safe place for future use!

User Information

Username| E-mail
Contact Number| Postal code
Mailing Address
Product Information

Product Name| Product number
Product barcode/ number/lot number
Vendor information

Name
Address
Contact Number| Postal code
Sale Date| Invoice number
Remark

MONSTER logo
Certificate of Conformity :……………
Product Number:……………….
Production Date:………………….
Inspectors: …………..

FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals