MONSTER MS32105 STINGER Gaming Wearable Speaker User Guide
- October 30, 2023
- Monster
Table of Contents
MONSTER MS32105 STINGER Gaming Wearable Speaker
Product Overview
- Speaker Unit
- USB-C Charging Cable
- Quick Start Guide & Warranty Letter
- Multi Function Button (MFB) music play/pause…
- Power On/Off Button
- Volume Control “˅” Button volume down, previous song.
- Volume Control “˄” Button volume up, next song.
- RGB Light
- Microphone
Power/Charging
Power/Charging
For better enjoyment, fully charge the speaker before use.
A USB-C charging cable (charge only) is included for standard USB compatible
device.
Please use a 5V/1A or above power adapter (not included).
Caution:
- Use compatible standard 5 volt power adapter ONLY.
- Other incompatible chargers may cause damages.
- Do not use if the connector or device is wet or damaged.
Power On/Off
To turn on the speaker, press and hold the Power On/Off Button for 2 seconds,
you will hear a power on tone. To turn off the speaker, press and hold the
Power On/Off Button for 2 seconds, you will hear a power off tone.
Caution: If no Bluetooth device is connected, the speaker will turn off in 15
minutes.
Pairing
First time “power on”, the speaker will enter pairing mode automatically.
When speaker is not connected to any Bluetooth device, pairing mode will start
automatically.
In pairing mode, turn on Bluetooth function on your phone and search for
“Monster Stinger” for pairing. When the speaker is connected, a prompt tone
will be heard, the blue RGB light will stop flashing and remain on
Volume Control
Short press the Volume Button “˄” or “˅” to turn volume up or down.
Music Mode
Play/Pause: Press the MFB to play or pause.
Next song: press and hold the “˄” button for 2 seconds.
Previous song: press and hold the “˅” button for 2 seconds.
Call
Answer call: Short press MFB.
Reject call: Press and hold the MFB for about 2 seconds.
End call: Short press MFB.
Light Mode
When the speaker is on, press the MFB for 3 seconds to alternate various light settings. Press the MFB twice to turn off the light.
Sound Effect Mode
When speaker is on, press the “②” button to alternate between music, game and movie sound effects.
Power Saving Setting
Power saving mode is activated when the speaker is turned on.
If no device is connected or no music playback or data transmission via
Bluetooth, the speaker will turn off automatically in 15 minutes.
RGB Indicator Guide
| Status | Description | Voice/Tone |
|---|---|---|
| Power On | RGB light on | Opening Tone |
| Power Off | RGB light off | “Goodbye” |
| Pairing | RGB light flashing | “Discovering” |
| Bluetooth connected | RGB light on | “Your device is connected” |
| Battery low | – | “Battery low” |
| Charging | Red RGB lights when charging, turns off after fully charged | – |
Reset Paired Device List
When power on and no music playback, press both “˄” and “˅” buttons simultaneously for factory default.
Caution
- Self replacement of battery is prohibited.
- Do not expose battery (battery pack or battery pack combination) in direct sunlight, fire or high temperatures.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FCC ID: 2AVD2-MS32105
IC Caution:
Radio Standards Specification RSS-Gen, issue 5
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may
cause undesired operation of the device.
RF exposure statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
