HOOKE ROAD BXG.8282 Guardian F150 Front Bumper Installation Guide
- June 1, 2024
- HOOKE ROAD
Table of Contents
HOOKE ROAD BXG.8282 Guardian F150 Front Bumper
Contents
HARDWARE
Tools required
- a. Drive Socket Ratchet Wrench;
- b. 10mm, 19mm Wrench;
- c. 19mm Shallow Socket;
- d. 4mm Hex Bit Socket;
Installation time
- About 1 hour, 1-2 people may be needed. Installation time may differ according to your mechanical skill level.
- (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)
- To view the electronic version (BXG.8282), please scan the QR code.
Installation instruction
- Step 1: Remove the factory front bumper, ready to install our product.
- Step 2: Secure the bumper and wing together by attaching them with M12*30bolts, ensuring a sturdy and reliable assembly. Repeat the same procedure on the other side.
- Step 3: Assemble the license plate bracket (A1, A2) utilizing M616 button head socket cap bolts, then securely install it onto the bumper using the same M616 button head socket cap bolts.
- Step 4: It is recommended to install the bumper with assistance. Lift the bumper, align it with the original vehicle mounting holes, and secure it using M12 nuts with washers. Adjust the gap from the vehicle and tighten the screws.
- Step 5: The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!
Attention:
- The product parts in this instruction may differ slightly from the actual product contents but generally do not affect the installation of the product.
- Please feel free to contact your distributor if you have any kind of questions about your purchase.
Google Hooke Road to find your parts.
- Feel Free To Share Your Vehicle @HookeRoad4x4
- With The Hashtag #hookeroad If You’d Like
- Front Bumper BXG.8282
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>