panacome SP-1320 Rechargeable Speaker User Manual

: June 6, 2024
: panacome

Table of Contents

FEATURES
SPECIFICATIONS
INTERNATIONAL WARRANTY
Documents / Resources

USER MANUAL
SP-1320 RECHARGEABLE SPEAKER User’s Guide

Thank you for purchasing SP-1320 Panacom’s
Rechargeable Speaker.
Please read the manual carefully before operating.

FEATURES

Wireless BT connection
TWS-True Wireless Stereo
FM radio
USB/TF
Led light
Rechargeable battery
USB charging cable
Mic input jack
Aux in
10W Power Output

SPECIFICATIONS

Speaker size: 4”
Lithium battery: 1200mAh

WIRELESS BT CONNECTION
A) BT Version: 5.0, with lower power consumption and over 10m meters operating range.
B) ON/OFF, after the power is turned on, the speaker emits a BT mode tone automatically.
C) Open the phone BT, search for the device name, click the device name to confirm, and then connect.
After the connection is successful, the speaker sends a pairing success tone.
TF/MICRO SD CARD MODE:
When the speaker is not plugged into the TF card device, it will boot into the BT mode. Inserting the TF card speaker will automatically detect the TF card playback mode. If the speaker has a TF card device, it will enter the TF card mode directly after booting.
USB MODE:
When the speaker is not plugged into the U disk, it will boot into the BT mode. Inserting the U disk, the speaker will automatically detect the USB playback mode. If the speaker has a U disk, it will enter the TF card mode directly after booting.
FM MODE:
A) Press the button ‘MODE’, enter into FM mode. FM
The frequency is 87.5Hz – 108.0MHz.
B) This speaker has a built-in radio antenna, needn’t an external antenna.
C) Press and hold the button ‘PLAY/PAUSE’ to automatically search the station, press the “PLAY/ PAUSE’ button to pause.
AUX MODE:
A) Plug one end of the 3.5MM audio cable into the speaker AUX jack, the speaker will automatically detect the AUX mode, and the other 3.5MM plug is connected to the phone or computer.
MIC FUNCTION:
A) Plug the USB cable into the speaker to connect to the 5V charger or computer to charge for inside Li-battery.
B) The item has a red light on the charging indicator.
When charging, the indicator light is on. When it is full, the indicator light is off.
CHARGING:
A) Plug the USB cable into the speaker to connect to the 5V charger or computer to charge for inside Li-battery.
B) The item has a red light on the charging indicator.
When charging, the indicator light is on. When it is full, the indicator light is off.
LOW-POWER PROTECTION:
When the speaker detects that the built-in battery voltage is lower than 3.3V, it will emit a low-power alarm sound. When the battery voltage is lower than 3.1V, the speaker will automatically shut down.
MODE CYCLE:
Press the‘ MODE’ button to switch USB, TF, FM, AUx.
(Note: USB, TF, AUX are only displayed when USB, TF, AUX input device is plugged in.)
LED FLASHLIGHT:
Press and Hold the ‘MODE’ button to turn on/off the LED flashlight.
TWS (TRUE WIRELESS STEREO)
Use your mobile phone to connect one BT speaker successfully firstly, Under BT mode, double click PLAY/PAUSE button of another BT speaker to enter into TWS pairing.

INTERNATIONAL WARRANTY

Terms and Conditions

Panacom warrants the operation of this product to be free from any manufacturing and/or material defect for a period of 6 months from the date of purchase by the user.
This warranty is limited to the repair and/or replacement of this product, according to our own criterion, free of charge within the stipulated term and it does not extend to
consequential or incidental damages to other products that may be used with this unit.
The warranty shall be voided in the following cases: a) repair or attempt to repair by third parties not authorized by the company. b) in case of performing any type of cut in
connection cables, plugs, connectors, or other adapters different from the original ones provided by the company.
To make this warranty effective, you shall contact the
Authorized Service Center of your country and they shall carry out the pertinent procedure. In order to start the necessary procedure to get a said warranty, you shall hand in the Original Purchase Invoice where the purchase date, dealer name, and product identification shall be stated clearly.
Transportation, freight, stay, and/or insurance expenses, if any, are not covered by this warranty.