Glastender PCB-18 Stainless Steel Cabinet Instructions

Glastender PCB-18 Stainless Steel Cabinet

Product Information

Specifications

• Material: Stainless Steel
• Model: F-423-011
• Revision: B
• Date: 11-05-15

Product Usage Instructions

Stainless steel requires proper care to prevent staining or rusting. Follow these guidelines:

1. Always follow label instructions on cleaning products.
2. Start with soap, water, and a soft cloth or sponge for regular cleaning.
3. Avoid using hydrochloric acid (muriatic acid) on stainless steel.

Cleaning Instructions for Drainboard Cabinet Families

1. Remove the drain pan below the drainboard by unscrewing the front and back drain pan mounting brackets.
2. Lower the pan while keeping the drain line attached.
3. Follow the general cleaning instructions mentioned above for stainless steel.
4. Reinstall the drain pan and reattach the mounting brackets.

FAQ

Q: Can I use any cleaning product on stainless steel?

A: It is recommended to follow the label instructions on cleaning products, but starting with soap, water, and a soft cloth or sponge is usually safe for regular cleaning.

Q: Why should I avoid using hydrochloric acid on stainless steel?

A: Hydrochloric acid can cause staining or rusting on stainless steel surfaces, so it is important to avoid using it for cleaning.

General Cleaning and Care Instructions

General Cleaning and Care Instructions for Stainless Steel

IMPORTANT: Always follow label instructions on cleaning products. Soap, water and a soft cloth or sponge are suggested first unless otherwise noted. Stainless steel will stain or rust if not cared for properly. Please pay attention to the following guidelines:

1. Use the proper tools – Use non-abrasive tools, such as a soft cloth or plastic cleaning pad.
   NEVER use steel wool pads, soap-filled scouring pads, abrasive cleaners, cleaners containing chlorine, Cooktop Polishing creams, or gritty washcloths.

2. Clean with the polish lines – Always scrub in a direction that is parallel to the grain or lines in the stainless steel.

3. Clean regularly – Make cleaning easier by doing so frequently to avoid the build-up of hard, stubborn stains. Use alkaline, alkaline chlorinated, or non-chloride-containing cleaners.

4. Rinse and wipe – Anytime chemicals are used to clean stainless steel, make sure to rinse afterwards with clean water and wipe away any standing water.

5. Never use hydrochloric acid (muriatic acid) on stainless steel.

Recommended cleaners for specific situations
Stainless steel needs to be cleaned for aesthetic considerations and to preserve corrosion resistance.
Stainless steel actually thrives with frequent cleaning, and, unlike some other materials, it is impossible to “wear out” stainless steel by excessive cleaning.
Routine cleaning – Use warm water, liquid detergent, ammonia, or all- purpose cleaner. Apply with soft cloth or sponge. Rinse with clean water and dry with a soft cloth.
Food spills – Clean Immediately. Use a stainless steel cleaner and polish. Apply with a soft cloth or sponge.
Fingerprints and smears – Use a stainless steel cleaner and polish or glass cleaner. Apply with a soft cloth or sponge.
Hard water spots – Remove with vinegar. Apply with a soft cloth or sponge.

For Drainboard Cabinet Families Only

1. Remove the drain pan below the drainboard by removing the screws of the front and back drain pan mounting brackets. Lower the pan leaving the drain line attached.
2. Follow the cleaning instructions above.
3. Reinstall the drain pan and reattach the mounting brackets.

CONTACT

• Glastender, Inc.
• 5400 North Michigan Road
• Saginaw, Michigan
• 48604-9780
• 800.748.0423
• 989.752.4275
• Fax: 989.752.4444
• www.glastender.com.

References

• Glastender, Inc.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>