HOOKE ROAD BXG.9804-S 4Runner Rear Window Molle Panel Modular Storage Panel System Installation Guide
- June 1, 2024
- HOOKE ROAD
Table of Contents
HOOKE ROAD BXG.9804-S 4Runner Rear Window Molle Panel Modular Storage
Panel System
Product Information
Specifications
- Part Number: BXG.9804-S
- Contents :
- 12 Button Head Socket Cap Bolts Screws (Size: M8*16)
- 6 Hex Bolt (Size: M8*16)
- 18 Flat Washer (Size: M8201)
- 22 Flange Hex Lock Nuts (Size: M8)
- 4 T-Slot Drop-in Stud Sliding Screw Bolt
- 4 Handle
- 4 Suction Cups
- 4 Rubber Spacers (Size: M6202)
Tools Required:
- a. Drive Socket Ratchet Wrench
- b. 5mm Hex Bit Socket
- c. 5mm Allen Wrench
- d. 13mm Wrench
- e. Easy Door Panel Removal Tool
Installation Time: About 40 minutes, 1-2 people may be needed. Installation time may differ according to your mechanical skill level.
Installation Instruction:
Note: This product has two installation methods: factory vehicle roof rack
installation and Hooke Road roof rack installation.
Factory Vehicle Roof Rack Installation:
Hooke Road Roof Rack Installation:
Attention: The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
Contents
Tools required
- Drive Socket Ratchet Wrench;
- 5mm Hex Bit Socket;
- 5mm Allen Wrench;
- 13mm Wrench;
- Easy Door Panel Removal Tool;
Installation time
About 40 minutes, 1-2 people may be needed. Installation time may differ
according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE
STARTING INSTALLATION!)
To view the electronic version (BXG.9804-S), please scan the QR code.
Installation instruction
Note : This product has two installation methods: it can be installed
either on the factory vehicle roof rack or on the roof rack sold by us. Please
choose the installation method that best suits your needs and proceed with the
installation accordingly.
Factory Vehicle Roof Rack Installation:
- First, you need to use a easy door panel removal tool to pry open the factory vehicle’s plastic cover in preparation for installing our product.
- Next, insert two T-Slot Drop-in Stud Sliding Screw Bolts into the groove of the factory vehicle’s roof rack.
- Next, assemble the factory vehicle mounting bracket into the panel. Please carefully differentiate the mounting brackets; the original vehicle mounting bracket has one side with only two installation holes. Assemble using M8*16 screws and nuts.
- Next, assemble the suction cups and handles on the two circular holes beneath the panel. During assembly, it’s necessary to place rubber spacers on the surface of the handle.
- Next, lift the assembled panel and install it on the factory vehicle roof rack. Ensure it is laid flat to be inserted into the roof rack. Secure it using M8 nuts.
- The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product! The installation demonstrated is on the driver’s side. Please replicate the same installation method on the passenger side. Hooke Road Roof Rack Installation
- First, assemble the suction cups and handles on the two circular holes beneath the panel. During assembly, it’s necessary to place rubber spacers on the surface of the handle.
- Next, insert the Hooke Road roof rack mounting bracket into the panel. Please carefully differentiate the mounting brackets; the Hooke Road mounting bracket has three installation holes on both sides. Assemble using M8*16 screws and nuts.
- Next, lift the assembled panel and install it on the Hooke Road roof rack. Ensure it is laid flat to be inserted into the roof rack. Secure it using M8*16 hex bolts and nuts.
- The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product! The installation demonstrated is on the driver’s side. Please replicate the same installation method on the passenger side.
Attention
- The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
- Please feel free to contact your distributor if you have any kind of question about your purchase.
FAQ
Q: Can this product be installed on any vehicle?
A: This product is designed for installation on compatible vehicle
roof racks. Please refer to the installation instructions for details.
Q: How do I ensure the panel is securely installed?
A: Follow the step-by-step installation instructions carefully,
ensuring all bolts, nuts, and screws are tightened properly to secure the
panel in place.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>