Avantree Aria 3 Wireless Over Ear Headphones Noise Cancelling User Manual
- June 1, 2024
- Avantree
Table of Contents
- Avantree Aria 3 Wireless Over Ear Headphones Noise Cancelling
- Box Contents
- Product Introduction
- Button Functions
- Charging the Headphones
- Connecting the Headphones to Your Device
- Specifications
- Contact Us
- Product Specifications
- FAQ
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Avantree Aria 3 Wireless Over Ear Headphones Noise Cancelling
Box Contents
Product Introduction
Product Overview
Button Functions
Headphones
LED Indicators
| No. | Indicator & Voice Prompt | Status |
|---|
A
| Solid red| Charging
Flashing red, “LOW BATTERY” voice indicator| Low battery
Blue flash every 2 seconds, “WELCOME TO AVANTREE” voice indicator| Power on
Solid red for 1 second then off, “GOODBYE” voice indicator| Power off
Alternate red & blue flashes, “PAIRING” voice indicator| Pairing
Blue flash every 5 seconds, “CONNECTED” voice indicator| Connected
Blue flash every 2 seconds, “DISCONNECTED” voice indicator| Disconnected
Solid pink for 5 seconds, then alternate red & blue flashes| Clearing pairing
history
B| Solid green, “NOISE CANCELING” voice indicator| Active Noise
Cancellation (ANC) mode
Charging the Headphones
A “LOW BATTERY” voice prompt and a flashing red A light indicate low battery.
To charge, you can use either a 5V/500mA-2A rated USB adapter (your phone
charger or similar should work) or a PC USB port as a power source. Plug the
provided type C power cable directly into the headphones’ charging port
.
A solid red light indicates that charging is in progress; once the light turns off, your headphones will be at full battery.
Connecting the Headphones to Your Device
Using with Your Phone
STEP 1
Turn on the headset. It will enter pairing mode automatically on the first
use. Otherwise, slide and hold the power switch to the “PAIR” position until
you hear “Pairing” and see the LED flashing RED & BLUE.
STEP 2
Turn on your device’s Bluetooth and select “Avantree Aria 3” in the Bluetooth
menu.
STEP 3
Keep the headphones close to your device and wait for 5-10 seconds or until
they connect. Once they’re successfully connected, you’ll hear a “CONNECT-ED”
voice indicator on headphones. The headphones’ LED indicator will flash blue,
then turn solid blue once you play audio.
For subsequent use, your headphones should automatically reconnect to the last-paired device within a few seconds of being turned on. If not, you can manually activate reconnection by sliding the PAIR ch to “PAIR” once, ON or by selecting “Avantree Aria 3” in your device’s Bluetooth menu.
Using Your PC
To connect the headphones to your PC, follow these steps:
STEP 1
Turn on the headset. It will enter pairing mode automatically on the first
use. Otherwise, slide and hold the power switch to the “PAIR” position until
you hear “Pairing” and see the LED flashing RED & BLUE.
STEP 2
Go to your computer’s Bluetooth settings and search for the Avantree device.
Click “Connect”.
STEP 3
Keep the devices close together. Once successfully connected, the headset’s
LED will turn solid blue, and you will hear a “Connected” voice indicator. For
subsequent use, the headset should automatically reconnect to the last paired
device within a few seconds after turning on. If not, manually reconnect by
sliding the power switch to “PAIR” once or selecting “Avantree” from your
device’s Bluetooth menu.
Configuring Audio Settings (Only for PC)
You may need to configure your audio settings when using the Aria 3 with your
PC or laptop.
STEP 1
In your device’s audio settings, ensure that “Avantree Aria 3” is selected as
the default for both SOUND OUTPUT / PLAYBACK and INPUT / MICROPHONE devices
.
STEP 2
Repeat the above steps in your meeting software (i.e. Teams, Zoom, Skype, etc
.)
NOTE: On Windows 7 / 8.1 / 10, if you use headphones with PC’s built-in Bluetooth, select “Avantree Aria 3 hands-free” as the default instead.
Specifications
Headphones
| Bluetooth version | v5.3 |
|---|---|
| Supported audio codecs | SBC |
| Supported profiles | HSP v1.2, HFP v1.7, AVRCP v1.6, A2DP v1.3.1 |
| Operating range | Up to 30ft / 10m |
| Drivers | 40mm |
| Impedance | 32Ω |
| Frequency response | 20Hz – 20KHz |
| Charging time | ~2hrs |
| Operating time | Up to 55hrs (ANC off) |
| Standby time | 325hrs (ANC off) |
| Product size | 190mm x 175mm x 80mm |
| Headphones weight | ~230g |
| Earpads’ inner diameter/depth | 60mm x 40mm x 35mm |
| Earpads outer diameter | 101mm x 80mm |
| Rated input | DC5V/500mA~2.0A |
| Power port | Type C |
Contact Us
- Support Tickets
- Support Email
Support Numbers
- US +1 800 232 2078 9 am-6 pm PST Mon-Fri
- CA +1 800 232 2078 9 am-6 pm PST Mon-Fri
- UK +44 208 068 2023 9am-6pm GMT Mon-Sat
- DE +49 322 2109 7297 11am-9pm CET Mon-Sat
- FR +33 17 634 0312 11am-9pm CET Mon-Sat
- IT +39 069 4803 330 9am-6pm CET Mon-Sat
- ES +34 93 1786 261 9am-6pm CET Mon-Sat
- AU +61 2 8310 9897 11am-7pm AEST Mon-Fri
FAQ
Product Registration See the QR code on the product.
Manufacturer:
Plantronics Limited Luohu District, Shenzhen 518000 China + 86 755 8228 5022
support@avantree.com
US Importer:
Avantree Corporation San Jose, California 95119 USA +1 800 232 2078
support@avantree.com
UK Importer:
Avantree Limited Watford, WD180 0HQ UK +44 20 8068 2023
support@avantree.com
Servicer in Europe: Gizmex GmbH, Sternstr. 67, 40479 Dusseldorf, Germany +49 322 2109 7297 support@avantree.com
Model No.: BTHS-AS92 Dispose of the packaging and this product under the latest provisions. Z-PKQG-AS92-V0
Product Specifications
- Model No.: BTHS-AS92
- Headphones Type: Over-ear
- Bluetooth Version: 5.0
- Active Noise Cancellation: Yes
- Battery Life : Up to 20 hours
FAQ
Q: How do I reset the headphones?
A: To reset the headphones, press and hold both buttons for 5 seconds to
clear the pairing history.
Q: How can I check the battery status?
A: A LOW BATTERY voice prompt and flashing red light indicate low battery.
When charging, a solid red light indicates the charging is in progress.