Avantree Z-PKQG-860T Small Portable FM Radio with Bluetooth Speaker User Manual

Avantree Soundbyte T
USER MANUAL
Model No.: BTSP-860-T

 Z-PKQG-860T Small Portable FM Radio with Bluetooth Speaker

Video Guide
Prefer to watch a video tutorial? Scan the QR code below or visit avantree.com/soundbyte-t/video for a step-by-step guide.

Book an Appointment
You can also book a 1-on-1 setup appointment with one of our support agents at avantree.com/book-a-call

Box Contents

To view and purchase Soundbyte T accessories, please visit avantree.com/soundbyte-t/accessories

Product Introduction

Product Overview

Button Functions

Press once to swap to saved FM channel
2| SCAN| Press once to automatically search for all available channels
3| | Press once to adjust channel up / down by 0.1 MHz
4| EQ| Press once to switch between clear voice / bass-enhanced / balanced sound modes
5| | Press once to enter sleep timer settings
6| | Press once to switch between FM / Bluetooth speaker / micro SD card player mode
| Press & hold to pair with your headphones
| Press once to enter system settings
Press once to confirm your selection while in the menu
| Press once for previous/next channel / track
( FM / Bluetooth / microSD card player modes )
Press & hold to seek for the next clear FM channel
| Press once to play / pause (Bluetooth speaker & microSD card player modes) or to mute / unmute ( FM / wired speaker modes )

Using as an FM Radio

STEP 1
For first time use, the radio will automatically enter FM mode (if not, press ) and auto-scan for FM channels by default (if not, press the SCAN button). Please wait until auto-scan is complete.
STEP 2
Press the button once to select your channel.
STEP 3
To save a channel, press the PAGE button once, then press & hold the 1 2 3 4 5 buttons. The screen will display “Saved to P#-#” to indicate that the channel has been properly saved. NOTE1: In “P1-2”, 1 indicates the page number, and 2 indicates the number button.
NOTE2: There are 4 total pages and 5 channels can be saved to each page (for a total of 20 channels). Press the PAGE button once to swap between pages.”
STEP 4
To jump to a saved channel, press the corresponding number button once.
NOTE: If you saved the channel to pages 2 / 3 / 4, you’ll need to press the PAGE button until you reach the proper page before pressing the corresponding number button.
Using with Your Bluetooth Headphones
The Soundbyte T can wirelessly transmit FM / micro SD / AUX audio signals to your Bluetooth headphones.
STEP 1
Ensure the speaker is in FM, micro SD, or AUX playing mode. It will NOT work in Bluetooth speaker mode.
STEP 2
Press & hold the button for 2 seconds. The screen will display as follows.![Avantree Z-PKQG-860T Small Portable FM Radio with Bluetooth Speaker

• STEP 4](https://manuals.plus/wp-content/uploads/2024/03/Avantree-Z-PKQG- 860T-Small-Portable-FM-Radio-with-Bluetooth-Speaker-STEP-4.png) Step 3
  Put your headphones into PAIRING mode.
  Step 4
  Keep your headphones & the Soundbyte T close to each other. Once they successfully connect, the screen will display as follows. NOTE1: Most cases where your device & the radio fail to connect happen because the device is not properly placed into PAIRING mode. Double check that your device is successfully in PAIRING MODE (typically indicated by an LED indicator’s alternate red & blue flashes). For more details, please refer to your device’s online user manual.
  NOTE2: Bluetooth devices normally automatically reconnect to their last paired / connected device. You may  need to turn the Bluetooth OFF on any previously used devices in order to avoid interference.
  For Subsequent Use
  Turn on both the radio and your headphones and press the button once. They should automatically reconnect. If not, repeat the steps above to re-pair them.

Using as a Bluetooth Speaker

STEP 1
Turn on the Soundbyte T and press the button once to enter Bluetooth speaker mode.
STEP 2
Activate Bluetooth on your device (i.e. your phone, tablet, laptop, etc.) and select “Avantree Soundbyte T.”
STEP 3
Keep the two devices close to each other. Once they successfully connect, the screen will display as follows. For Subsequent Use
Every time you turn it on, the speaker should automatically reconnect to the last connected device. If not, select “Avantree Soundbyte T” on your device.

Using as a MicroSD Card Player

When you insert a microSD card ( not included ), the radio will automatically switch to microSD mode if the radio is on. If the radio is off when you insert the card, you’ll need to press the button to switch to microSD mode.
The Soundbyte T supports MP3 / WMA / WAV / APE / FLAC file formats.
Repeat / Shuffle Settings
Press the button once to enter the system settings.
Press  SEEK to select “REPEAT / SHUFFLE”, then press SEEK SEEK to select the desired option and press once to confirm.
NOTE: The Soundbyte T cannot read microSD cards larger than 32GB.

Charging

A icon will flash on the Soundbyte T’s screen to indicate low battery. You can charge the radio using any USB adapter with a 5V/0.5-1A output (i.e. your phone charger or similar) via the included USB C charging cable.
The icon on the LCD screen will flash while charging and stop once charging is complete. It takes about 3 hours to fully charge the radio.

Configuring the System Settings

Turn on the device and press the button once to enter the system settings. Press SEEK SEEK to select your desired option, then press to confirm your selection.

Specifications

FAQ

Below are some of the most common questions people have during setup.

Can I replace the battery?
Yes. You can purchase a replacement battery at avantree.com/soundbyte-t/accessories or use any 3.7V 18650 lithium-ion battery.
Why is my FM reception so bad?
Why is my microSD card not working?
Why are my headphones failing to connect?
……
For answers to questions like these and for a full FAQ list, you can visit avantree.com/support/soundbyte-t, or you can contact us directly for additional assistance.

Contact Us

| Support Tickets| avantree.com/submit-a-ticket
---|---|---
| Support Email| support@avantree.com
| USA/CA
UK
DE
FR
IT
ES
AU| +1800 232 2078 (9am-6pm PST, Mon-Fri )
+44 20 8068 2023 (9am-6pm, GMT, Mon-Sat)
+49 32221097297 (11am-9pm, CET, Mon-Sat )
+ 33 176340312 (11am-9pm, CET, Mon-Sat )
+39 06 9480 3330 (9am-6pm, CET, Mon-Sat )
+ 34 931786261 (9am-6pm, CET, Mon-Sat )
+ 61 2 8310 9897 (11am-7pm, AEST, Mon-Fri)
| FAQ| avantree.com/support/soundbyte-t
| Video Guide| avantree.com/soundbyte-t/video

Manufacturer: Avantronics Limited
Address: Luohu District, Shenzhen 518000 China
US Importer: Avantree Corporation
San Jose, California 95119 USA
UK Importer: Avantree Limited
Watford, WD180 0HQ UK
Servicer in Europe: Gizmex GmbH,
Sternstr.  67, 40479 Dusseldorf, Germany
Tel: 01 – 408 334 8648 support@avantree.com
Model No: BTSP-860-T
Dispose of the packaging and this product in accordance with the latest provisions.
Z-PKQG-BTSP-860-T

References

• Avantree - Book a Call
• Submit a Ticket For Customer Service | Avantree

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>