Avantree BTHT-6190P Wireless Plus Opera Headphones TV Watching User Manual
- June 2, 2024
- Avantree
Table of Contents
- Avantree BTHT-6190P Wireless Plus Opera Headphones TV Watching
- Product Information
- Product Usage Instructions
- Box Contents
- Product Introduction
- Charging the Headphones & Powering the Transmitter
- Setting up
- Advanced Features
- Troubleshooting
- Specifications
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Avantree BTHT-6190P Wireless Plus Opera Headphones TV Watching
Product Information
Specifications
- Model No.: BTHT-6190P
- Input: DC IN, AUX, OPT, HDMI ARC
- Output: Bypass Output To Speaker, Headphones
- Connectivity: Transmitter & Charging Dock, USB Adapter
Product Usage Instructions
Headphones Usage
- To turn on the headphones, switch to TV mode for transmitter connection, Phone mode for phone/tablet connection, OFF to turn off.
- Adjust volume by clicking or holding the volume button.
- Press and hold to enter pairing mode. Press once to play/pause audio.
- Switch between balanced/clear voice/cinema sound modes by pressing the EQ Mode Button.
- Mute/unmute audio by pressing the designated button.
Transmitter Usage
- Turn on/off the transmitter by switching to the ON/OFF position. – Hold at the PAIR position for 5 seconds to enter pairing mode. – Switch between normal and boosted volume modes by pressing VOL Boost button. – Select desired audio input method (AUX, OPT, HDMI ARC) with the Input Selector.
FAQ
-
How do I pair the headphones with the transmitter?
To pair the headphones with the transmitter, ensure both devices are turned on. Press and hold the pairing button on the transmitter for 5 seconds until you hear pairing. On the headphones, press and hold the pairing button to enter pairing mode. Once paired, you will hear a confirmation sound. -
How do I switch between different sound modes on the headphones?
To switch between different sound modes on the headphones (balanced/clear voice/cinema), press the EQ Mode Button until you hear the desired sound mode.
Video Guide
Prefer to watch a video tutorial? Scan the QR code below or visit
avantree.com/opera-plus/video for a
step-by-step guide.
Book an Appointment
You can also book a 1-on-1 setup appointment with one of our support agents at
avantree.com/book-a-call
Box Contents
To view and purchase Opera Plus accessories, please visit avantree.com/opera- plus/accessories
Product Introduction
Headphones
Product Overview
Button Functions
LED Indicators
Transmitter
Product Overview
Button Functions
LED Indicators
Charging the Headphones & Powering the Transmitter
-
OPTION 1
Simply put the headphone back on the charging dock to recharge them. The charging dock’s front LED will turn red while charging, and turn off once charging is complete. Normally, it takes about 3 hours to fully charge the headphones.
-
OPTION 2
You can also charge the headphones directly through their power port using a USB C charging cable and USB adapter. A solid red light indicates that charging is in progress; once the light turns off, your headphones are at full battery.
Powering the Transmitter
To power the transmitter, connect it to a wall outlet via the provided power
cables and wall adapter. It doesn’t hold a charge, so it needs to be connected
to power in order to function.
Setting up
Connecting to Your TV
Once the transmitter is connected to a power source, next is to connect it to
your TV’s audio output ports. You can choose one of 4 options to do this:
-
OPTION 1 Optical port (Recommended)
Plug the provided optical audio cable into the TV’s optical OUT or “OPT / OUT” port, then plug the other end into the transmitter’s optical port in the “INPUT FROM TV” section. On your transmitter, switch the “AUDIO INPUT SELECTOR” to the “OPT” postion.
NOTE: Most TVs support audio output through only one digital output port at a time, so if your TV’s HDMI ARC port is in use, the optical port may be disabled. You can either unplug the HDMI ARC cable, or try connecting the transmitter via RCA / AUX. -
OPTION 2 HDMI ARC port (Recommended)
Plug your HDMI cable (not provided) into the TV’s “HDMI ARC” port, then plug the other end into the transmitter’s HDMI ARC port in the “INPUT FROM TV” section.On your transmitter, switch the “AUDIO INPUT SELECTOR” to the “HDMI ARC” position.
- NOTE 1: The HDMI ARC port only supports TV HDMI ports labeled “ARC”
- NOTE 2: The HDMI cable should be HDMI 1.4 or above.
-
OPTION 3 AUX 3.5mm port
Plug the provided AUX 3.5mm audio cable into the TV’s AUX 3.5mm output port, then plug the other end into the transmitter’s AUX 3.5mm input port in the “INPUT FROM TV” section. On your transmitter, switch the “AUDIO INPUT SELECTOR” to the “AUX” position.
-
OPTION 4 RCA port
Connect the RCA adapter to the AUX 3.5mm audio cable. Plug the red & white RCA connectors into the TV’s “AUDIO OUT” ports, then plug the other end into the transmitter’s AUX 3.5mm input port in the“INPUT FROM TV” section. On your transmitter, switch the “AUDIO INPUT SELECTOR” to the “AUX” position .
Connecting the Headphones
Now that your transmitter is set up, all that’s left is to connect the
headphones.
-
STEP 1
First, power on both the transmitter and headphones (slide to the TV postion). -
STEP 2
The transmitter and headphones will auto-connect. Once connected, the headphones’ & transmitter’s LEDs will turn solid blue.
Setting Up Your TV(For Optical &HDMI ARC Connections only)
If you connected to your TV via the optical OUT, OPT / OUT or HDMI ARC port,
you’ll need to configure your TV settings before you receive audio.
-
STEP 1
Using your TV’s remote control, press the SETTINGS button and navigate to the AUDIO tab within the settings menu. (Please note that there may be differences in the setting names depending on your brand of TV). -
STEP 2
Proceed to AUDIO OUTPUT and select “OPTICAL OUT / DIGITAL OUT/ HDMI ARC”. Many TVs will do this automatically; skip this step as needed. -
STEP 3
Set Audio Output format to “PCM / STEREO” ON or “DOLBY” OFF.
If you’re having trouble finding these settings, you can scan the QR code
correlating to your TV’s brand OR visit avantree.com/opera/tv-audio-settings
for a more detailed guide.
NOTE 1: Smart TVs automatically reset their settings after system
updates. If you’re not getting sound, make sure your audio output/input format
is set to “PCM” and NOT “AUTO” or “Dolby.”
NOTE 2: When using Netflix or Amazon Prime, you may need to start the
movie/show before changing the audio settings to “PCM.”
Advanced Features
Listening with a Soundbar(Only for Optical and AUX Connection)
The pass-through function allows you to listen through both the headphones and
an external soundbar/stereo AVR simultaneously.
-
STEP 1
Set up the transmitter and connect it to your TV. -
STEP 2
Plug an additional optical, 3.5mm AUX, or RCA audio cable into the correlating audio port in the transmitter’s “BYPASS OUTPUT TO SPEAKER” section. -
STEP 3
Plug the other end into your external sound system, then you’re good to go!
NOTE : Bypass only works with the same type of input / output, i.e. if you connect to your TV via OPT, you’ll need to connect to your speaker via OPT as well.
Adding Another Pair of Headphones
You can add a second pair of Opera Plus headphones (AS90-K) to your setup
while maintaining low latency.
Please note that ONLY Opera Plus headphones (AS90-K) are compatible due to
private protocal connections.
-
STEP 1
On your transmitter, slide and hold the power switch to the “PAIR” position until the LED indicator flashes red & blue. -
STEP 2
On your second pair of Opera Plus headphones, slide the power switch to the “TV” position. When using for the 1st time, it will enter pairing mode automatically, and the LED will flash red & blue alternately. If not, press and hold the button to manually enter pairing mode. -
STEP 3
Keep them close and wait for 2 seconds. Once connected, the headphones’ & transmitter’s LED indicators will turn solid blue.
To purchase a 2nd Opera Plus headphones (AS90-K), scan the QR code below.
Use the Headphones independently with a phone
-
STEP 1
On your headphones, slide the power switch to the “PHONE” position. For the 1st time, it will enter pairing mode automatically, and the LED will flash red & blue alternately. If not, press and hold the button for 5 seconds to manually enter pairing mode. -
STEP 2
Turn on your Phone’s Bluetooth and select “Avantree Opera Plus” from the Bluetooth menu.
Troubleshooting
Below are some of the most common questions people have during setup.
Can I have audio through my TV’s speakers and wireless headphones at the
same time?
This completely depends on whether or not your TV supports the ability to
output audio to 2 sources simultaneously. You can try a few different methods
to test if your TV is capable of this or not — please refer to
avantree.com/opera- plus/sound for more details.
Why don’t I get sound when watching Netflix / Prime Video?
You may need to change your TV’s audio settings an additional time when
watching Netflix / Prime Video. This can be due to the movie being in Dolby
Digital Surround Sound format, or because you’re watching with a separate
streaming device/cable box. While Netflix / Prime Video is open, go into your
TV’s audio settings and make sure that the audio output is set to “PCM /
STEREO” and that “DOLBY” is turned OFF.
Why aren’t my headphones connecting to the transmitter?
For answers to questions like these and for a full FAQ list, you can visit
avantree.com/support/opera-plus, or
you can contact us directly for additional assistance.
Specifications
Transmitter & Headphones
| Carrier frequency | 2.4GHz |
|---|---|
| Frequency response | 20Hz – 20KHz |
| Operating range | Up to 164ft / 50m |
| Power port | Type C |
| Input | 5V/500mA-2A |
Headphones
| Wireless tech | 2.4G RF & BT5.2 |
|---|---|
| BT supported profiles | HFP 1.7, HSP 1.2, A2DP 1.3, AVRCP 1.6 |
| Battery life | 20H |
| Time to full charge | 3H |
| Battery | Lithium polymer battery, 650mAh |
| Driver size | 40mm |
| Impedance | 32Ω |
| Sensitivity | 96 dB |
| Net weight | 245g |
Contact Us
- Support Tickets: avantree.com/submit-a-ticket
- Support Email: support@avantree.com
Support Numbers
- US +1 800 232 2078 9am-6pm PST Mon-Fri
- CA +1 800 232 2078 9am-6pm PST Mon-Fri
- UK +44 208 068 2023 9am-6pm GMT Mon-Sat
- DE +49 322 2109 7297 11am-9pm CET Mon-Sat
- IT +39 069 4803 330 9am-6pm CET Mon-Sat
FAQ: avantree.com/support/opera-plus
Video Guide: avantree.com/opera-plus/video
Product Registration: See QR code on the product tag.
Manufacturer:
Avantronics Limited
Luohu District, Shenzhen 518000 China
+ 86 755 8228 5022
support@avantree.com
US Importer:
Avantree Corporation
San Jose, California 95119 USA
+1 800 232 2078
support@avantree.com
UK Importer:
Avantree Limited
Watford, WD180 0HQ UK
+44 20 8068 2023
support@avantree.com
Servicer in Europe:
Gizmex GmbH,
Sternstr. 67, 40479 Dusseldorf, Germany
+49 322 2109 7297
support@avantree.com
Model No.: BTHT-6190-P
Dispose of the packaging and this product in accordance with the latest
provisions.
References
- Wireless TV Headphones, Devices, and Audio Solutions | Avantree
- Avantree - Book a Call
- Search results for: 'opera'
- Search results for: 'opera plus video'
- Submit a Ticket For Customer Service | Avantree
- Search results for: 'support opera plus'
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>