Avantree BTHS-AS100 Eon Headphones User Manual

Avantree BTHS-AS100 Eon Headphones

Specifications

• Model: BTHS-AS100
• ANC Modes: ANC / Transparency / Normal
• EQ Modes: Balanced / Bass-boosted
• Charging Input: Type C Power Cable
• Audio Input: AUX 3.5mm Audio Cable
• Microphone: Boom Mic

Charging the Headphones
To charge the headphones, follow these steps:

1. Use a 5V/500mA-2A rated USB adapter or PC USB port as a power source.
2. Place the headphones on the charging stand. The LED on the charging dock will turn white during charging and green once fully charged.

Connecting the Headphones to Your Device
To connect the headphones to your device:

1. Turn on the headphones by switching the power button to the ON position.
2. Put the headphones in pairing mode by switching to the HOLD TO PAIR position and holding for 2 seconds.
3. Search for the headphones on your device’s Bluetooth settings and select to pair.

Using as Wired Headphones If you prefer to use the headphones as wired headphones:

1. Switch the headphones to the WIRED position.
2. Connect the AUX 3.5mm audio cable to both the headphones and your device’s audio jack.

FAQ

• Q: How do I switch between different EQ modes?
  A: Press the EQ mode button to switch between balanced and bass-boosted modes.

Box Contents

Product Introduction

Product Overview

Button Functions

LED Indicators

A

| Solid red| Charging
Flashing red| Low battery
Flashing blue, “BATTERY HIGH / MEDIUM / LOW” voice indicator| Power on
Solid red for 1 second then off, “GOODBYE” voice indicator| Power off
Alternate red & blue flashes, “PAIRING” voice indicator| Pairing
Blue flash every 5 seconds, “CONNECTED” voice indicator| Connected
Blue flash every 2 seconds, “DISCONNECTED” voice indicator| Disconnected
Solid pink for 5 seconds, then alternate red & blue flashes| Clearing pairing history
**B| Solid green, “NOISE CANCELING” voice indicator| Active Noise Cancellation (ANC) mode
Green flash every 5 seconds, “TRANSPARENCY” voice indicator| Transparency mode
LED off, “NORMAL” voice indicator| Normal mode
C| Solid red| In a call
****D| Solid white| Charging
Solid green| Charging complete
E**| Solid red| Muted microphone

Charging the Headphones

A “BATTERY LOW” voice prompt and a flashing r Aed light will indicate low battery. In order to charge, you can use either a 5V/500mA-2A rated USB adapter (your phone charger or similar should work) or PC USB port as a power source.

1. OPTION 1 Charging with the stand
   Place the headphones on the charging stand. The charging dock’s LED will turn white while charging and turn green once charging is complete.

2. OPTION 2 Charging via USB cable
   Alternatively, you can plug the provided type C power cable directly into the headphones’ charging port.
   

A solid red light indicates that charging is in progress; once the light turns off, your headphones will be at full battery.

Connecting the Headphones to Your Device

Pairing & Connecting

1. STEP 1
   Turn on the headphones. For first time use, the headphones will enter PAIRING mode automatically.
   If not, put your headphones into PAIRING mode by sliding the ON switch to “HOLD TO PAIR” and holding for 2 seconds until the LED flashes red & blue.
   

2. STEP 2
   Turn on your device’s Bluetooth and select “Avantree Eon” in the Bluetooth menu.

3. STEP 3
   Keep the headphones close to your device and wait for 5-10 seconds or until they connect. Once they’re successfully connected, the headphones’ LED indicator will flash blue, and you’ll hear a “CONNECTED” voice indicator.
   

For subsequent use, your headphones should automatically reconnect to the last-paired device within a few seconds of being turned on. If not, you can manually activate reconnection by sliding the switch to “HOLD TO PAIR” once, or by selecting “Avantree Eon” in your device’s Bluetooth menu.

Configuring Audio Settings (only for PC)

You may need to configure your audio settings when using the Eon with your PC or laptop.

1. STEP 1
   Access your device’s audio settings and set “Avantree Eon” as the default in SOUND OUTPUT / PLAYBACK. Set “Avantree Eon” as the default in INPUT / MICROPHONE DEVICE.
   

2. STEP 2:
   Repeat the above steps in your meeting software (i.e. Teams, Zoom, Skype, etc.)
   

NOTE: On Windows 11 / macOS, there is no “Hands Free” option; select “Avantree Eon” as the default instead.”

Calling with the Boom Mic

The Eon headphones themselves have a built-in mic, but using the detach-able boom mic will significantly enhance your call quality. Its noise-filtering technology will ensure your voice (and only your voice) is heard loud and clear, and its mute switch can be conveniently utilized.
We highly recommend using the boom mic for your calls. You can use it in both wireless and wired modes by plugging it into the headphones and
(optionally) connecting the AUX cable directly to the boom mic.

Using as Wired Headphones

1. STEP 1
   Slide the switch to “OFF / Wired.

2. STEP 2

3. OPTION 1
   If you don’t need the mic, plug the AUX 3.5mm audio cable into both the headphones and your audio output device.
   

4. OPTION 2
   If you’d like to make calls, plug the detachable boom mic into the head-phones first, then plug the AUX 3.5mm audio cable into the mic. Plug the other end of the cable into your audio output device.

NOTE: When in wired mode, listening modes (ANC, transparency, normal) and all other built-in buttons do not function. The switch on the boom mic will still work.

Replacing the Rechargeable Battery

The rechargeable batteries, located in both headphones ears, can be replaced to extend your Eon’s lifespan. Scan the QR code below or search “Avantree Eon battery” on Amazon or the Avantree website in order to purchase.

You can also use compatible batteries with the following specifications: 3.7V lithium ion 10440 rechargeable battery, capacity 350mAh.
Please visit avantree.com/eon/replace-battery for installation instructions and recommended sellers’ details.

Specifications

FAQ

Below are some of the most common questions people have during setup.

Why is the microphone not working with my PC?
There are several reasons why the microphone may not be working with your PC. First and foremost, check the boom mic to ensure the mute switch is OFF (unmuted). The issue could also be related to hardware or computer settings. To determine if it’s a hardware issue, connect the headphones to your phone and test call someone, trying both with and without the boom mic. If there are no issues, double check your computer settings.

• Make sure only one meeting app is open at a time.
  Ensure your PC settings are properly set – check your computer’s sound settings and make sure the Eon is selected as both the output and input source. Check your meeting software’s sound settings as well.

• Make sure there’s no interference from a second device – if your Eon is simultaneously connected to another device via dual link, try disconnecting from the other device.

Why isn’t my audio switching between my phone and PC with the dual link feature?
To switch between your phone and your PC, first pause the audio / end the call on the current device (either by using the controls on your active device or by pressing the corresponding button on the headphones).
After 7-10 seconds, initiate audio on the second device. The Eon should automatically swap sources.
You can find a full FAQ list at avantree.com/support/eon, or contact us directly for additional assistance.

Contact Us

• Support Tickets avantree.com/submit-a-ticket
• Support Email support@avantree.com
• FAQ avantree.com/support/eon
• USA / CA +1800 232 2078 (9am-6pm PST, Mon-Fri )
• UK +44 20 8068 2023 (9am-6pm, GMT, Mon-Sat)
• DE +49 32221097297 (11am-9pm, CET, Mon-Sat )
• FR + 33 176340312 (11am-9pm, CET, Mon-Sat )
• IT +39 06 9480 3330 (9am-6pm, CET, Mon-Sat )
• ES + 34 931786261 (9am-6pm, CET, Mon-Sat )
• AU + 61 2 8310 9897 (11am-7pm, AEST, Mon-Fri)
• FAQ avantree.com/support/eon
• Product Registration avantree.com/product-registration

Manufacturer: Avantronics Limited
Address: Luohu District, Shenzhen 518000 China

US Importer:
Avantree Corporation
San Jose, California 95119 USA

UK Importer:
Avantree Limited
Watford, WD180 0HQ UK

Servicer in Europe:

• Gizmex GmbH,
• Sternstr. 67, 40479 Dusseldorf, Germany
• Tel: 01 – 408 334 8648    support@avantree.com

Model No:BTHS-AS100
Dispose of the packaging and this product in accordance with the latest provisions.

FCC Requirement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

References

• Search results for: 'eon replace battery%E3%82%92%E3%81%94%E8%A6%A7%E3%81%8F%E3%81%A0%E3%81%95%E3%81%84%E3%80%82'
• Product Registration
• Submit a Ticket For Customer Service | Avantree
• Search results for: 'support eon'
• Wireless TV Headphones, Devices, and Audio Solutions | Avantree

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>