HOOKE ROAD BXG.2095-S 2 Doors Running Boards Nerf Side Step Bars Installation Guide

HOOKE ROAD BXG.2095-S 2 Doors Running Boards Nerf Side Step Bars

Product Information

Specifications:

• Model: BXG.2095-S
• Quantity: 1 set
• Tools Required: Drive Socket Ratchet Wrench, 12mm Deep Socket, 3mm & 4mm Hex Bit Socket
• Installation Time: About 30 minutes

Product Usage Instructions

Step-by-Step Installation Guide:

1. Driver Side Installation:
2. Step 1: Remove the factory vehicle side step.
3. Step 2: Assemble the mounting bracket with the (M8*20) Button Head Socket Cap Bolts Screws groups. Do not tighten the bolts yet.
4. Step 3: Lift up the side step into position, ensuring correct mounting locations. Use U-nut fasteners if needed.
5. Step 4: Install the (M820) Button Head Socket Cap Bolts Screws groups without tightening. Use appropriate screws for M6 screw holes if necessary. Secure with (M820) Hex Bolts, (D8) Split Lock Washer, and (M8202) Flat Washer in inside holes.  djust position and tighten all bolts.
6. Step 5: Repeat installation on the passenger side.
7. Step 6: Adjust the main body left and right for comfort.
8. Step 7: Tighten all bolts to complete the installation.

FAQ

• Q: What should I do if I encounter missing parts during installation?
  A: Please contact your distributor for assistance in obtaining the missing parts.

• Q: How do I know if the side steps are installed correctly?
  A: Ensure that all bolts are securely tightened and the side steps are firmly attached to the vehicle frame.

• Q: Can the side steps be used on all vehicle models?
  A: The side steps are designed to be compatible with most vehicle models, but it is recommended to check compatibility before installation.

Contents

PART LIST

Tools required:

• a. Drive Socket Ratchet Wrench.
• b. 12mm Deep Socket.
• c. 3mm & 4mm Hex Bit Socket.

Installation time
About 30 minutes, 1-2 people may be needed. Installationtimemaydiffer according to your mechanical skill level. (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.2095-S), please scan the QR code.

Installation instruction

Driver Side Installation

• Step 1: Remove the factory vehicle side step, ready to install our sidestep.
• Step 2: Assemble the mounting bracket with the (M8*20) ButtonHeadSocketCap Bolts Screws groups. Don’t tighten up those bolts.
• Step 3: Lift up the side step into the position. Make surethatmountinglocations are correct. (If the inside hole in your vehicle is not threaded, you can install it by using a U-nut fastener.)
• Step 4: Install the (M820) Button Head Socket Cap Bolts Screwsgroups.Don’t tighten up those bolts. (If your vehicle has an M6 screw hole here, use M6 screws groups.) Then, use the (M820) Hex Bolts, (D8) Split LockWasher, and (M8202) Flat Washer in inside holes. Adjust the side step position and tighten up all bolts.
• Step 5: Repeat the same installation method in the passenger side.
• Step 6: Adjust the main body left and right to the comfortable position.
• Step 7: The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!

Attention

1. The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
2. Please feel free to contact your distributor if you have any kind of questions about your purchase.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>